MOBILLA MBuds 101 Wireless Earbuds Manufacturer User Manual
- June 9, 2024
- MOBILLA
Table of Contents
MOBILLA MBuds 101 Wireless Earbuds Manufacturer
MBUDS 101 – TWS EAR BUDS
A Warm Welcome from Mobilla and many thanks for purchasing our MBUDS 101 – TWS EARBUDS. To get the most of these dynamic sound buds, please go through this manual thoroughly.
Each pack will include:
- A pair of Buds
- A Charging case
- A Charging cable
Introduction to Various Feature List of MBuds101:
- 05 Hours Music Play
- Splash Proof & Water Resistance IPX4
- Charging Case 320mAh Battery
- Stand by time 200 Hours
- Charging Time About 2 Hours
- Voice Assistant (Hey Sir) (Ok Google)
- Noice Isolation
- Built in Mic
- Multi Connect TWS Function
- In Ear Form Factor
- Drive Size 10mm
- Battery Capacity 40mAh*2 + 320mAh
- Bluetooth Range 10 Meter
- Bluetooth Version 5.0
- Supported Wireless Profile (HFP, HSP, A2DP and AVRCP )
- Warrenty 1 Year
How to power ON the MBuds?
- It will automatically be turned on when you take out the MBuds from its charging case.
How to power OFF the MBuds?
- Once you put the MBuds back into their charging case and close the lid, it will be turned off automatically.
- Upon removal of the MBuds from the charging case, if they are not being used, they will be turned off within 2 minutes.
How to pair MBuds 101 with your Smartphone?
- Take the buds out of the charging case to turn on the device.
- The LEDs on the Buds will start blinking Blue & Red.
- Now turn on the wireless connection of your phone.
- It will automatically search the device name ” Mobilla MBuds 101″
- Now from your phone wireless setting “Pair” the device.
- Finally, a voice prompt will say “Connected” and the LED on the MBuds will turn blue.
How to answer an incoming call?
- While you are watching your favourite show or listening to your favourite music with MBUDS, a voice prompt will indicate ” You have a call”.
- It will keep repeating the same till you answer the call.
How to charge your MBuds 101?
- Place the MBuds back in the case.
- Now the buds will start blinking RED lights.
- 4 BLUE indicator lights in the middle of the case also start blinking at the same time to indicate, the device is in charging mode now.
- 4 LED indicator lights are distributed to display 25% charge each. For example, if it shows 3 blue lights, it means your device is left out with 75% charge. Likewise, if it shows 2 lights, it means, your device still has 50% charge left.
- On a single charge, the Buds will have a Music play time of 5 hours.
- With the Charging case fully charged, you will get a total music play time of 21 Hours.
How to Charge the Carrying/Charging Case?
- In order to charge the case, you need to plug one end of the TYPE C cable into a USB port (preferably 5V/1A) and the other end into the case.
- The 4 lights in the charging case indicate the battery status of the case.
How to Wear MBuds 101?
- Put the MBuds gently into your ear canals for a snug fit.
- Pull on your earlobes to seal the MBuds in place.
- Make sure you are not shaking your head frequently to avoid the MBuds falling on the floor/ground.
Charging method and precautionary guidelines:
- Always charge your MBuds with a 5V adapter (preferably 5V/1A adapter).
- Make sure the cable used to charge the device is of standard quality.
Frequently Asked Questions
Q. How to connect the MBuds to another device?
A. Turn off the wireless connection from the connected device and simply
follow the “How to pair” instructions given above.
Will this device pair with multiple devices?
Yes, you can’t establish a connection with two devices at a time.
Q.How many times one can charge his/her MBuds with a fully 100% charged
case?
With a fully charged charging case, you can charge up to 3 times.
Q.If the device fails to pair with your device?
A.Kindly restart the phone and the MBuds as wel.
Q.What to do if the MBuds keeps disconnecting?
A. lt happens possibly for two reasons:
- It might have happened because of low battery. Charge the buds immediately.
- Maybe the buds have already surpassed the maximum range of 10 meters. Plecise make sure, MBuds are used within this range.
Q. Bluetooth is connected but can’t listen to music?
- Check the device setting to adjust the sound of MBuds.
- Some devices want you to select the device twice.
- Some devices do not have complete stereo function. Kindly connect the MBuds with ainother device to check if it is functioning properly.
Q.Only one earbud is working?
A. In this case simply insert the MBuds case back into the charging case.
Caution:
- Please follow the instruction carefully. Always charge the earbuds with input power below 5V/2A.
- It is absolutely not advisable to wear these earbuds in extreme temperatures.
- Do not use this product near water.
- Keep the device away from heat sources. Make sure there’s no jam in the charger port.
- Do not listen to MBuds at maximum volume.
- It may cause permanent hearing loss.
- Do not clean the device with harsh chemicals.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>