anko 43233229 Alarm Clock with RGB Light and Bluetooth Speaker Instruction Manual
- June 9, 2024
- Anko
Table of Contents
anko 43233229 Alarm Clock with RGB Light and Bluetooth Speaker Instruction
Manual
USB Driver Mode
Insert USB disk (Up to 64G) into ®USB driver port. It will play audio track automatically and “USE’ on the display screen.
Press button to skip soundtrack; Press +/— button to adjust volume.
Supported audio files: MP3/WMA/WAV/M4A/FLAC/APE
Temperature
Press and hold M button to switch the temperature °C or °F.
Light Mode
Press touch button to turn ON/OFF warm white light and choose brightness.
Press to turn ON/OFF and switch RGB light.
Charging
This device is powered by a rechargeable battery. Please use provided USB-C cable for charging. Plug the USB-C cable end to the unit and the other USB-A end into a wall charger or other 5V charging device. There is a red light next to the 5 charging port and light will be ON when the device is fully charged.
Charging Progress:
Indicator light flashes once : 0-25%
Indicator light flashes twice: 25% – 50%
Indicator light flashes three times: 50% – 75%
Indicator light flashes four times: 75% – 100%
Power Bank Function:
You can charge your devices via the USB host port.
Specification
Model No.: 43233229
Input Voltage: 5V 1A Speaker
Power Output: 5W
Bluetooth Version: 5.0
Powered by Rechargeable Battery: 4000mAh
Before using the unit please read this manual carefully. Ensure children and
infants do not play with plastic bags or any packaging materials.
Children must not use this product without adult supervision. Keep away from
water, liquids, or wet areas. Use a dry cloth to clean this product.Do not use
chemicals on this product.
Do not expose the product to fire or high temperatures over 45°C. Make sure
the product has plenty of ventilation during charging.
Do not place the product in direct sunlight, heat or the under the windshield.
Do not drop, stand on. puncture, or apply excessive force to the product, as
harsh impacts could damage the product.
If unit is dropped or otherwise damaged, discontinue use immediately.
If crushed, punctured, disassembled, exposed to fire or high temperatures,
batteries may catch fire or explode. If the product swells or budges,
discontinue use immediately and dispose of the unit appropriately.
Do not insert foreign object into the product.
Do not try to repair or disassemble this product.
Do not charge the portable charger and charge your device simultaneously.
This product should be only operated from the type of power source indicated
on the marking label. To preserve battery lifespan, use and recharge at least
once every 3 months.
For long-term storage (over 3 months), charge the device between 50 percent to
75 percent charge level.
When the unit is not in use, make sure it is correctly turned off and stored
in a cool dry place. When disposing of this product. Do so responsibly
following local government requirements.
WARNING: READ AND FOLLOW ALL ABOVE INSTRUCTIONS CAREFULLY. DO NOT DROP OR APPLY EXCESSIVE FORCE TO THIS PRODUCT. DO NOT EXPOSE TO HIGH TEMPERATURES. IMPROPER USE OR HANDLING OF THIS PRODUCT MAY RESULT IN FIRE OR EXPLOSION CAUSING SERIOUS INJURY OR PROPERTY DAMAGE.
12 month warranty
Thank you for your purchase from Kmort.
Kmart Australia Ltd warrants your new product to be free from defects in
materials and workmanship for the period stated above, from the date of
purchase. provided that the product is used in accordance with the
accompanying recommendations or instructions where provided. This warranty is
in addition to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange (where possible) for this product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer Help at kmart.com.au for any difficulties with your product. Warranty claims and claims for expense incurred in returning this product can be addressed to our Customer Service Centre at 690 Springvale Rd, Mulgrove Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.
WARNING Do not dispose of unit in fire or water. ) Never attempt to disassemble and reassemble. ) Waste electrical products should not be disposed of with household waste, please recycle where facilities exist. ) Check with your local authority for recycle advice. ) Keep your device and all accessories out of the reach of children and animals. ) Smal parts may cause choking or serious injury if swalowed. ) Avoid exposing your device to very cold or very hot temperatures (below O’C or above 45’C). ) Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device. ) Do not allow your device to get wet—liquids can cause serious damage. ) Do not handle your device with wet hands.
Z516
The Bluetooths word mark and logos are registered trademarks owned by
Bluetooths SIG, Inc., and any use of such marks by KMART AUSTRALIA is under
licence.
Function overview
- LED display
- Buttons
- RGB light touch button
- Warm white touch button
- USB-C charging port
- TF card slot
- USB driver port
- AUX-in port
- Antenna Cable
Button Function
Press to switch the 12/24hour;Press and hold to set Time.
Press to turn ON/OFF the alarm clock; Press and hold to set Alarm Clock.
— Decrease the numbers when you are setting the time; Decrease the volume
in Bluetooth/FM mode. + Increase the numbers when you are setting the
time; Increase the volume in Bluetooth/FM mode. Press M to switch mode;
Press and hold to switch the temperature °C/°F.
Press and hold button for 3-5 seconds to turn ON/OFF the device. Press button
to paly / pause in Bluetooth mode. Press and hold for 2 seconds to search and
save FM channel automatically in FM mode. Press button to answer phone calls
in Bluetooth mode.
Press previous soundtrack in Bluetooth. Press and hold to enter light timing
setting while both in Bluetooth mode and warm white light on, there are 3
timing options in this device:15 minutes/ 30 minutes/ 60 minutes. Light icon
shows on display; Press and hold to cancel light timing setting, light icon
will disappear on the display. Press ► next soundtrack.
Turn on the warm white light, tap lightly to switch brightness levels.
To switch between RGB colours, turn on and tap lightly.
How to use this product
Power ON/OFF
Press and hold button for 3-5 second to turn ON/OFF the device.
12 hour System
24 hour System
Time Setting
Press button to choose 12/24H system.
Press and hold button to enter time setting, press + or button to set
Hour. Press 0 button to confirm Hour setting then enter Minute setting. Press
- or — button to set minute then press button to confirm Time setting.
Note: The device will save setting in 10 seconds automatically if no operation while time setting.
Alarm Setting
Press button to turn on the alarm clock, will show on the display screen; Press to turn off alarm clock.
Press and hold button to enter alarm setting then Hour number flashes. Press + or — button to set hour then press button to enter Minute setting.
Press + or — button to set minute, then press to enter Alarm Volume setting from U5-U31. Press + or — button to set alarm volume. Press button to confirm Alarm Volume setting and enter Alarm Sound setting.
Press + or — button to choose alarm sound, there is total 5 sounds (A01- A05).
Press to confirm Alarm Sound setting.
When the alarm rings, press any button to cancel it except an
Snooze Mode
When alarm clock rings, device will enter the snooze mode if there is no action within 3 minutes.
Alarm will sound again after 7 minutes.
It will repeat twice if no action. Press any button to cancel snooze mode.
Note: press any button to cancel snooze except and
Bluetooth Mode
The device enters Bluetooth mode by default when powered on.
In the Bluetooth menu on the media device, search for “KM43233229” and connect. Type password “0000” or “1234” if password requested.
You will hear prompt sound once the device is connected successfully.
FM Mode
Press M to choose FM mode, MHz shows on the display.
Press and hold for 2 seconds to search and save FM channels automatically in FM mode, Press to cancel auto searching. While FM is playing, Press to continue/stop FM playing
Press button to select saved channel. Press +/— button to adjust volume.
Note: The strength of FM signal will depend on the signal level received in your area. Some rural areas are unlikely ever to be effectively covered. Weak signal strength can also be caused by destructive interference of the signals from local towers in urban areas, or by the construction materials used in some buildings causing rapid attenuation of signal strength. Large buildings such as warehouses, hospitals and factories often have no usable signal further than a few meters from the outside walls.
AUX Mode
Use a 3.5mm audio cable to connect your device through the 8 AUX-in port. Choose the soundtrack from your media device and play.
TF Card Mode
Insert TF card(up to 16G) into ©TF card slot. It will play audio track
automatically and show “SD” on the display screen.
Press button to skip soundtrack; Press +/— button to adjust volume.
Supported audio files: MP3/WMA/WAV/M4A/FLAC/APE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>