anko 43243952 Gaming Mouse Instruction Manual

anko 43243952 Gaming Mouse

Please read all the information carefully before you use the product and keep the manual for future reference.

Safety Instructions

Please read the instruction manual before using this device and follow all the safety instructions to avoid damage caused by improper use.

• Keep the instruction manual for future reference. Should this device be given to a third party, then this instruction manual must also be handed over.
• Use this device solely for its intended purpose.
• Only use this appliance indoors
• Keep the appliance away from all hot surfaces and naked flames.
• Always put the appliance on a level, stable, clean, dry surface. Protect the appliance from extreme heat and cold, dust, direct sunlight, humidity and drops or jets of water.
• Do not immerse the appliance in water or in other liquids.
• Do not open the housing under any circumstances.
• Do not introduce any objects into the interior of the housing.
• Should the device malfunction due to electrostatic discharge or a short power surge, disconnect it from your computer and then reconnect it again.

Product Overview

Connecting the Mouse

1. Plug the USB cable into a free USB port on the computer.
2. The mouse will connect automatically and can be used immediately.

Features

• Selectable DPI: 1200 2400 3200 4800 6400 10000DPI. Default lamplight DPI takes yellow blue purple green red-cyan.

13 kinds of RGB light effects. The RGB light mode can be adjusted by long pressing the “Forward/Back Button + DPI button”.

1. DPI Breathing mode
2. Cycle Breathing mode
3. Light On mode
4. Flowing Water mode
5. Mono Water mode
6. Comet Streak mode
7. Neon mode
8. Ambilight mode
9. Flicker mode
10. Star Trek mode
11. Ripple mode
12. Enraptured mode
13. Button Response mode

Note:
Long press the DPI button to close the light effect if no need. (For more information please see the following light effects description set on the software).

• supports Windows 7/8/10 or later
• For more functions, please enter “http://www.intraindustry.com/downloads.html” to download the driver.

Main interface and functions description

After installing “KM43243952 Gaming Mouse Setup”, double-click it to enter the program. The main features include:

1. Button
2. Performance
3. Marco
4. Backlight

Button Function

You could switch to the below 11 key functions by setting one of these base keys: Left Click/Middle Click/Right Click/Forward/Backward/DPI Loop/Rapid Fire.

Note:

• The left Click function is necessary. If you want to set the default Left Click to another function, please set the other button function as Left Click first.
• Please click the Apply button after you choose the function you want.

1. Left Click: Left button function
2. Middle Button: middle button function
3. Right Click: Right button function
4. Forward: Enter to the next page
5. Backward: Back to the previous page
6. DPI Loop: DPI loop switch
7. Rapid Fire: The long press is equivalent to constantly triggering the left button
8. Extend Function: Show Desktop, Double Click, Rapid Fire, LED Loop, DPI+, DPI-
9. Media Function: Browser, Media Player, Mail, Volume Up, Volume Down, Precious Track, Next Track, Mute, Play/Pause, Calculator
10. Shortcut Function: Copy, Paste, My computer, Undo, Lock PC, Close Window, Select All, Search
11. Profiles Selection: Office, Game1, Game2, Media

Performance

1. Mouse Sensitivity: To adjust the movement speed of the mouse
2. Mouse Scroll Speed: To adjust the scroll wheel speed of the mouse
3. Double Click Speed: To adjust the double-click speed of the mouse
4. Polling Rate: with 125Hz/250Hz/500Hz/1000Hz to choose
5. DPI Settings
   • Six groups DPI: gear 1/ gear 2/ stalls 3/ stalls 4/ stalls 5/ stalls 6, check the selections
   • DPI setting: set the 6 groups of DPI value, adjust within the range of 200 ~ 12800DPI

Macro Editor

Macro management can record any keys on the keyboard, the time of keys’ reaction, and the number of key cycles.

• Right-click in the Macro list box and select the New macro group option to create a new macro group
• Right-click on the new macro group and select Add a new macro to add a macro under this macro group
• Click record and start recording any keys of the keyboard. The keys you recorded will display in the macro edit box
• After the recording, click Stop to stop recording.
• After the recording is completed, just exit the macro recording interface, no need to click the confirmation keys.
• Execute a macro, such as a mouse button right key set to “macro functions”, after recording is complete, press the mouse right key to play the recorded content.

Lighting Settings

14 kinds of light effect: DPI Breathing mode— Cycle Breathing mode— Light On mode— Flowing Water mode— Mono Water mode— Comet Streak mode— Neon mode— Ambilight mode— Flicker mode—Star Trek mode—Ripple mode—Enraptured mode—Button Response mode—LED OFF

Choose one of the 14 light effects you want, then click Apply button in the Last line, the mouse will switch to the light effect you want.

Uninstall

Open the control panel and open the ”Add or Remove Programs” window, find “KM43243952 Gaming Mouse” and click “delete” to complete the uninstall program.

References

• intraindustry.com/downloads.html

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>