NOVY 7210400 Recirculation Kit Instruction Manual

: June 8, 2024
: NOVY

Table of Contents

NOVY 7210400 Recirculation Kit
INSTRUCTIONS FOR SAFETY AND USE
Warnings before installation
THE MONOBLOCK RECIRCULATION FILTER
USE OF THE MONOBLOCK RECIRCULATION FILTER
INSTALLATION
Assembly of the monoblock filter
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NOVY 7210400 Recirculation Kit

NOVY-7210400-Recirculation-Kit-PRODUCT

INSTRUCTIONS FOR SAFETY AND USE

Further information on Novy products, accessories and services may be found on the internet: www.novy.co.uk These are the installation instructions for the appliance shown on the front. These directions for use make use of a number of symbols. The meanings of the symbols are shown below.

Symbol	Meaning	Action
	Indication	Explanation of an indication on the device.
	Warning	This symbol indicates an important tip or a dangerous situation

Warnings before installation

Read the directions for use and the installation instructions before installing and using this appliance. You will find important information here for the assembly and use of the appliance.
The appliance is intended exclusively for household use (preparation of food) and excludes all other domestic, commercial or industrial use. Do not use the appliance outside.
Keep good care of this manual and pass it on to any person who may use the appliance after you.
This appliance complies with the applicable safety instructions. However, inexpert installation may cause personal injury or damage to the appliance.
Check the condition of the appliance and the installation
fittings as soon as you remove them from the packaging. Remove the appliance from the packaging with care. Do not use sharp knives to open the packaging.
Do not install the appliance if it is damaged, and in that case inform Novy.
Check on the basis of drawing A that all the materials for installation have been supplied.
Novy is not liable for damage resulting from incorrect assembly, incorrect connection, incorrect use or incorrect operation.
Safety is guaranteed only with expert installation in accordance with the installation manual. The installing technician is responsible for proper operation at the installation location.
Metal parts may have sharp edges, and you may injure yourself on them. For that reason, wear protective gloves during installation.
Do not convert or alter the appliance.
Remove labels and stickers on the appliance with tips for use or installation. The type sticker is to be found behind the grease filter in the appliance. Do not remove it.

THE MONOBLOCK RECIRCULATION FILTER

Contemporary, energy-efficient kitchen ventilation: you can’t have the first without the latter. Recirculation offers the solution for this. Recirculation extraction hoods do not remove the cooking fumes, but filter the odour and fat out of the air and then blow the filtered air back into the home. The Novy monoblock filter absorbs unpleasant odours and makes the removal of hot air to the outside unnecessary.The basis of the monoblock filter is an advanced form of activated carbon particles in the shape of minuscule spheres that are bonded to a load-bearing labyrinth structure. Due to the labyrinth structure, the monoblock filter has a limited loss of pressure and maintains a maximum efficiency. This results in efficient extraction, excellent odour absorption and a limited noise level.

USE OF THE MONOBLOCK RECIRCULATION FILTER

The monoblock filter is used in combination with a cooker hood/hood or worktop extractor. Before programming and using the recirculation mode, read the operating instructions of your device. For optimal operation of the monoblock recirculation filter, it is important to switch on the extractor before cooking and to respect the after-running time. To do this, read the instructions in the operating instructions for your appliance. Provide adequate ventilation in the kitchen for optimal efficiency of the recirculation system. An indication on the cooker hood or downdraft extractor indicates that the Monoblock recirculation filter needs to be replaced. The lifetime of this Monoblock recirculation filter is indicated on the label on the filter itself You can obtain a new monoblock filter from specialist retailers or via the Novy website. Article number monoblock filter: 7300055

Important : Please read the safety and installation instructions before you start

NOVY-7210400-Recirculation-Kit-FIG-2

INSTALLATION

Preparations for mounting
Draw the vertical axis V of the chimney hood on the wall. The recommended height ‘h’ between the bottom of the chimney hood and the cooking plate is for
The recommended mounting height for an electrical or ceramic cooking plate is min. 600 mm and max. 750 mm.
The mounting height for a gas or induction cooking plate is min. 650 mm and max. 750 mm.
The level line B is drawn at the chosen height of ‘h’ + 106 mm. Position the socket outlet near the vertical axis V. within the width of the shafts and above the motor housing and below the recirculation box (G).
Position the upperside of the mounting bracket (A) on the horizontal line (W). Place the centre of the mounting bracket on the vertical axis line (V). Mark and drill the holes, gently screw on the mounting bracket (A) using the screws provided.
Position the mounting bracket level. Fix the mounting bracket by drilling the third hole and secure the bracket with a plug (B) and a screw (C). Check all screws are tightly screwed.
Now take the ceiling bracket (D) (from the box of the cooker hood) and screw it together with the two brackets (E) of the recirculation filter kit 10mm from the ceiling centrally to the axis line using the screws (C) and plugs (B).
Mount the silencer (G) to the bracket at the top (E) with the screws (F) provided.
Attach the angle bracket (H) on top of the cooker hood with the screws provided (F). Tighten the screws.
For model 7211, also fix the exhaust pipe (J) on top of the cooker hood with screws (F). Use sealing tape (K) to seal the connection at the edge.
Hook the hood in angle bracket (A) and keep supporting the hood until it is attached to the wall by means of the angle bracket (H), plugs (B) and screws (C). Be sure to hang the hood central to the vertical axis line (V). Place the off-set bracket (G) 100 mm above the angle bracket (H) and centrally on the vertical axis line (V).
Place the exhaust pipe (O) on the exhausst pipe using the supplied aluminium tape (M 906-292) or clamping ring. Stretch the exhaust pipe (O) against the inlet of the silencer (G) and tighten. Measure the distance X, cut a piece of insulating mate of this size and fasten it around the exhaust pipe (O) Remove the grease filter (L) from the cooker hood and insert the plug into the socket.
Slide the upper chimney (R) out of the lower chimney (Q), turn them around so that the grill is at the top. Slide the upper chimney (R) back into the lower chimney (Q). Place the insulatin mate (P) around the exhaust pipe (O). Attach the chimneys (R and Q) around the exhaust pipe. Tighten the lower chimney from the inside of the cooker hood with the 4 screws (F). Clips the chimney over the spacer bracket (I).
Pull the upper chimney (R) out to the ceiling then fasten the chimney with the supplied stainless steel screws (S).

Assembly of the monoblock filter

NOVY-7210400-Recirculation-Kit-FIG-6

A. Remove the monoblock filter (D) from the monoblock filter holder (A). Slightly press the locking spring (B) between thumb and forefinger to unlock it.
B Open the bottom panel and remove the grease filter from the cooker hood. Take the monoblock filter holder (A) and place it in the cooker hood with the spring unlocking on the side of the hinges of the bottom plate and fasten it with 6 screws (C).
C Replace the monoblock filter (D) in the monoblock filter holder.
D Close the locking spring (B) by squeezing it together and securing it in the provided slot. Replace the grease filter (E) in the cooker hood. Stick the sticker indicating the service life of this monoblock filter next to the opening of the grease filter. Close the bottom panel

You can reopen the locking spring (B) by squeezing it together and pulling it backwards. When selecting recirculation, always set the recirculation program on the extractor hood. To do so, read the instructions in the operating instructions of your appliance. Novy nv reserves the right at any time and without reservation to change the structure and the prices of its products.

Noordlaan 6 B – 8520 KUURNE