Hotpoint AH12E07D3B PTAC with Electric Heat User Guide

Table of Contents

Model: AH12E07D3B

Dimensions:

Wall Case Dimensions:
- A: 30 inches
- C: 70 inches
Wall Opening Dimensions:
- Add 1/4 inch to A and C dimensions for all cut-outs
- RAB80: Minimum H x Minimum W – 16-1/4 inches x 42-1/4 inches

Electric Heater Specifications:

Ensure that the wall case dimensions match the requirements for installation.
If necessary, make appropriate cut-outs in the wall using the dimensions provided, adding an additional 1/4 inch to A and C dimensions.
Install the wall case, ensuring it is securely mounted.
Connect the unit’s line cord to a compatible power source with a voltage of 230/208 volts.
Refer to the specifications for the appropriate circuit requirements. Ensure that the circuit can handle a minimum of 20amps.
Install a 20 amp time-delay fuse or breaker as a recommendedprotective device.
Once the unit is properly installed and connected, it is ready for use.

AH12E07D3B
Hotpoint® PTAC with Electric Heat 20 amps, 230/208 Volt

ELECTRICAL WIRING

All wiring, including installation of receptacle, must be made in accordance with local electrical codes and regulations.
NOTE: Aluminum wiring may pose special problems – consult a qualified electrician.

GRILLE OPTIONS

ELECTRICAL CONNECTION

230/208 volt units must be plugged into a receptacle. Installation must comply with local electrical codes and regulations.
Power cord is permanently attached on all Hotpoint chassis.

AH12 ELECTRIC HEATER

WALL CASE DIMENSIONS

RAB80 WALL SLEEVE
Heavy-gauge galvanized steel, with insulation, for quick self-assembly. A – 42”, B – 13-3/4”, C – 16”

MAXIMUM CORD EXTENSION

$Hotpoint-AH12E07D3B-PTAC-with-Electric-Heat-FIG- $2$$

WALL OPENING DIMENSIONS
Add 1/4” to A and C dimensions for all cut-outs.
RAB80 16-1/4” Min. H x 42-1/4” Min. W

$Hotpoint-AH12E07D3B-PTAC-with-Electric-Heat-FIG- $3$$

7,400 / 7,300 cooling BTU
13.1 EER
R32 Refrigerant – Environmental friendly, low GWP (Global Warming Potential)
3-Speed Fan – Give guests control over their comfort with three fan speeds to choose from
4-Temperature Limiting Options – Easily select one of four temperature ranges for peak efficiency and total customer comfort
Intuitive Display – Allow guests to easily customize their preferred settings and reduce maintenance calls with an easy-to-use control panel
Power Cord (LCDI) Included – Hotpoint PTACs come with everything needed for a quick and easy installation
Automatic Emergency Heat – Keep guests comfortable with a heating option that uses electric resistance heat in heat pump mode
Freeze and Frost Protection – Automatic freeze and indoor frost control keep units operating in peak condition
Auto Power Recovery – In case of power failures, units automatically resume their operation when power restores, reducing maintenance calls
Self Diagnostics – Quickly and easily identify service needs with a nine-point diagnostic code system
Backed by an Industry Leader – With a long history of creating durable products at an affordable price, Hotpoint is your trusted PTAC brand