JOY MagConnect or VESA HD AMPs Mount Installation Guide
- June 8, 2024
- JOY
Table of Contents
MagConnect™ or VESA
HD AMPs Mount
Installation Guide
MagConnect or VESA HD AMPs Mount
Content List
- MagConnect or VESA Ball Joint
- Mount Arm
- AMPs Mount Base
Base Installation
Align existing AMPs holes and attach with screws (not included)
Using appropriate screws for the surface (not included), drill down the base
Arm Installation
- Assemble spring and lever
- Thread on cap clockwise, do not fully insert
- Insert base ball joint into arm
- Insert the MagConnect / VESA ball joint
- Turn lever clockwise until hand-tight
- Push lever down
- Insert screw into the end cap and fully tighten down
DISCLAIMER FOR JOY FACTORY TABLET MOUNTS
Congratulations on the purchase of your new Tablet Mount from The Joy Factory,
Inc!
BEFORE YOU INSTALL OR USE YOUR TABLET MOUNT, PLEASE READ ALL LITERATURE
PROVIDED WITH YOUR MOUNT TO ENSURE THE MOUNT YOU PURCHASED IS COMPATIBLE WITH
THE TABLET OR TABLETS YOU INTEND TO USE WITH THE MOUNT. IF YOU ARE NOT CERTAIN
WHETHER THE MOUNT IS COMPATIBLE WITH YOUR TABLET(S), PLEASE CHECK THE JOY
FACTORY WEBSITE OR CONTACT CUSTOMER SERVICE. BEFORE YOU INSTALL OR USE YOUR
TABLET MOUNT, READ THIS DOCUMENT AND ALL INSTRUCTIONS CAREFULLY. IMPROPER USE
OF THE MOUNT WILL RESULT IN DAMAGE TO YOUR TABLET. USE OF THE MOUNT WITH OTHER
DEVICES MAY CREATE AN INSECURE MOUNTING OF THE DEVICE, MAY PLACE UNANTICIPATED
LOADS OR STRESS ON THE MOUNT, AND/OR WEAKEN THE MOUNT.
USE OF YOUR TABLET MOUNT WITH DEVICES OTHER THAN THOSE DEVICES FOR WHICH IT IS
DESIGNED WILL VOID ALL WARRANTIES FROM THE JOY FACTORY, WHETHER SUCH
WARRANTIES ARE EXPRESS OR IMPLIED. THE JOY FACTORY DISCLAIMS ANY AND ALL
LIABILITY FOR USE OF OUR MOUNTS WHEN IT IS NOT USED AS DESIGNED OR WHEN IT IS
USED FOR ANY PURPOSE OTHER THAN THE PURPOSE FOR WHICH IT IS DESIGNED.
THE JOY FACTORY SELLS VARIOUS MOUNTS FOR DIFFERENT USES OR APPLICATIONS. ONLY
USE YOUR Tablet MOUNT FOR ITS INTENDED PURPOSE AND ONLY WHEN AND WHERE IT IS
SAFE TO DO SO AND ONLY WHERE PERMITTED BY LAW.
The Joy Factory’s Tablet mounts are not intended to protect the electronics
used with the mounts from damage to, or loss or theft of, the Tablets. All
liability for damages or loss or theft of an electronic device used in
conjunction with The Joy Factory mounts is disclaimed and all warranties
relating to same, whether express or implied, are also disclaimed by The Joy
Factory.
Installation or attachment of any mounts from The Joy Factory must be done in
conjunction with the instructions provided by The Joy Factory, and liability
for damage to the mounts or anything to which they are attached, and any
warranties, whether express or implied, are disclaimed by The Joy Factory.
For Mounts Used in Motor Vehicles:
FOR MOUNTS USED IN MOTOR VEHICLES, NEVER USE OUR MOUNTING DEVICE OR
ELECTRONICS WHILE OPERATING THE VEHICLE OR WHILE THE VEHICLE IS IN MOTION.
The Joy Factory disclaims any liability and all warranties, whether express or
implied, for use of its mounts in motor vehicles in any way which is not
allowed by law. The Joy Factory disclaims any liability and all warranties,
whether express or implied, for use of its mounts in any way which interferes
with the ability of the driver to operate the motor vehicle, distracts the
driver of the motor vehicle, or is otherwise dangerous or reckless. The Joy
Factory will not pay for damages incurred or for citations, tickets, or fines
issued due to improper mounting or use of its mounts.
For mounts used in vehicles, passengers in the vehicle should only use our
mounting device or electronic devices when it is safe to do so and only where
such use does not distract the operator of the vehicle or distract the
operator’s ability to safely operate the vehicle.
With respect to The Joy Factory mounts designed to mount to a vehicle
windshield via suction cup, it is critical to confirm whether such mounts are
legal in your state and, if so, any limitations on use of suction cup
attachments to windshields. Some states completely ban use of suction cup
mounts to windshields in motor vehicles. Some other states may allow use of
suction cup mounts to a vehicle’s windshield, but only in certain locations on
the windshield or in a manner which does not obstruct the driver’s vision or
otherwise distract the driver of the motor vehicle.
With respect to The Joy Factory mounts designed to mount to a vehicle’s seats
using bolts, you are encouraged to hire a professional to install that mount.
Installation of bolt-mounted devices from The Joy Factory must be done
pursuant to instructions from The Joy Factory and from the manufacturer of
your vehicle.
Improper installation of a mounted device bolted to your vehicle’s seat may
lead to the mount and/or the vehicle’s seat or other parts of the vehicle,
being incapable of operating as intended. Any and all damages to your vehicle,
the mount or any electronic device due to improper installation, whether by
you, a professional, or any other third party, is not the responsibility of
The Joy Factory, and The Joy Factory disclaims any and all such warranties,
whether express or implied, for improper installation or use of bolt mounted
devices.
The Joy Factory will replace your Tablet mount if it has any manufacturing
defects, free of charge, for one year from the date of purchase. If you
believe the mount has a manufacturing defect, cease use immediately and
contact The Joy Factory by email at
support@thejoyfactory.com or by
telephone at 949-216-8888, Monday
through Friday, 9:00 a.m. to 5:00 p.m., Pacific Time. Unfortunately, The Joy
Factory is not able to replace or pay for replacement of Tablets or any
additional items which may be damaged from use of a mount from The Joy
Factory, whether the mount has or does not have manufacturing defects.
If your mount is damaged for any reason, or is not functioning properly for
any reason, immediately stop using it. The Joy Factory expressly disclaims all
liability and all warranties, whether express or implied, for use of one of
its mounts that has been damaged for any reason. The Joy Factory will not
replace a mount that is damaged, other than a mount with a manufacturing
defect, nor will it replace, or pay for replacement of Tablets or any
additional items which may be damaged due to use of a damaged or altered
mount.
The Joy Factory disclaims all liability for lost or stolen mounts and any
device used with said mount.
Do not use your mount from The Joy Factory with any other Tablet case. Use of
an additional case may create an insecure mounting of the device, may place
unanticipated loads or stress on the mount and/or may weaken the mount, and
The Joy Factory disclaims all liability from such use and will void any and
all warranties, express or implied. Any alteration to your mount, or any part
thereof, will void any and all warranties and guarantees, whether express or
implied, and The Joy Factory disclaims any and all liability for damages
arising from use of an altered mount.
For full warranty information please visit thejoyfactory.com/warranty-
information.
Contact us:
support@thejoyfactory.com
949-216-8888
Monday through Friday,
9:00 a.m. to 5:00 p.m. (PST)
QSG-MMU332-MMU232-202106
Documents / Resources
| JOY
MagConnect or VESA HD AMPs
Mount
[pdf] Installation Guide
MagConnect or VESA HD AMPs Mount, MagConnect HD AMPs Mount, VESA HD AMPs
Mount, HD AMPs Mount, HD Mount, AMPs Mount, Mount
---|---