PROMINENCE HOME 59004 LED Lighted Mirror Instruction Manual
- June 8, 2024
- PROMINENCE HOME
Table of Contents
PROMINENCE HOME 59004 LED Lighted Mirror
Questions? Call our customer service department at 1-877-706-3267, 8 a.m. – 5 p.m. Central Time, Monday – Friday.
TOOLS REQUIRED
SAFETY INSTRUCTIONS
Read instructions completely before installing the mirror.
WARNING:
- If the colors of the household supply wires are different than what is referred to in the instructions below, a professional electrician should determine proper wiring.
- An electrical mirror must be wired to a 20 amp GFCI (Ground Fault Circuit Interruptor) when used in a bathroom and all other locations required by the National Electrical Code.
CAUTION:
- Rated for damp locations. Not suitable for outdoor use.
- Be sure the outlet box is properly grounded or that a green or bare (ground) wire is present.
- You may need a second person to support the mirror during installation.
ASSEMBLY INSTRUCTIONS
-
Turn off circuit breakers and wall switch to the mirror.
DANGER: Failure to disconnect power supply prior to installation may result in serious injury or death. -
Determine the orientation of the mirror.
The mirror can be mounted either direction. -
Use a mounting bracket and a level (not included) to mark the location of the pilot holes.
-
Use .25” diameter drill bit (not included) to drill the pilot holes for the drywall anchors.
-
Use a hammer (not included) to tap the drywall anchors into the pilot holes.
-
Use 3 screws from hardware bag to install the mounting bracket.
-
Secure all wire connections with wire connectors according to diagram and these steps:
- Connect the Bare wire from the fixture to the Bare/Green (ground) supply wire.
- Connect the Black wire from the fixture to the Black (hot) supply wire.
- Connect the White wire from the fixture to the White (neutral) supply wire.
Note: If household supply wires are different colors than referred to above, it is recommended a professional electrician determines the proper wiring.
-
Lift the mirror onto the mounting bracket. Note: Ensure the bracket preassembled to the back of the mirror interlocks with the mounting bracket on the wall.
-
Turn on power supply at the breaker box and wall switch to the mirror.
OPERATING INSTRUCTIONS
Light Control – Tap button to turn off/on. Press and hold to dim.
Note: When power is turned on, the light will come on at the last
setting.
Anti-fog feature: The anti-fog will automatically activate when mirror
light is turned on.
3-YEAR LIMITED WARRANTY
To obtain service, please contact Customer Service:
1-877-706-3267, 8 a.m. – 5 p.m. Central
Time, Monday – Friday.
The manufacturer warrants all of its mirrors against defects in materials and
workmanship for three (3) years from the date of purchase. If within this
period the product is found to be defective, take a copy of the bill of sale
as a proof of purchase and the product in its original carton to the place of
purchase. The manufacturer will, at its option, repair, replace or refund the
purchase price to the consumer. All costs of installation and removal of the
fixture is the responsibility of the consumer. This warranty does not cover
fixtures becoming defective due to misuse, accidental damage or improper
handling and/or installation and specifically excludes liability for direct,
incidental or consequential damages. As some states do not allow exclusions of
limitations on an implied warranty, the above exclusion and limitation may not
apply. This warranty gives you specific rights and you may also have other
rights which may vary from state to state.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>