INTELLINET 508216 Gigabit PoE+ Media Converter Instructions
- June 8, 2024
- INTELLINET
Table of Contents
INTELLINET 508216 Gigabit PoE+ Media Converter
For additional benefits:
Scan to register your product warranty
or go to : register.intellinet-network.com/r/508216
Connections
This product requires an SFP transceiver module that provides fiber optic connections.
- Insert the transceiver into the media converter and route the fiber optic cable into the transceiver.
- Route the other end of the fiber optic cable into a suitable port in your fiber optic network.
Maximum length and fiber cable specification depend on the model.
RJ45
Connect the UTP port of the media converter to powered RJ45 device; e.g., to a
network camera. Cat5e or better cabling is recommended.
Power
Plug the power adapter into the input jack on the media converter. Then
connect it to a regular power outlet. Only use the included power adapter or
one with matching specifications.
Setup
Features
The DIP switches on the Intellinet Gigabit PoE+ Media Converter present helpful options for easily detecting link faults when they occur. Enabling Link Fault Pass-through (LFP) by switching the LFP DIP switch to “ON” forces the devices on a link to acknowledge that they are online before data can be transmitted. When one of the devices doesn’t respond, data cannot be sent. If a copper connection breaks when the LFP function is enabled, the converter’s Link Loss Carry Forward (LLCF) feature stops data transmission and generates a trap to a management station. Likewise, if a fiber connection breaks when the LFP function is enabled, the converter’s Link Loss Return (LLR) function will return a no-link condition to its link partner and cease data transmission.
Power over Ethernet+
The Intellinet Gigabit PoE+ Media Converter complies with IEEE 802.3at /
802.3af standards. When the included power adapter is connected to the
converter, the device can supply up to 30 watts of power to a PoE-compliant
powered device.
LED Status
| LED | Status | Status Description |
|---|
PWR
| Off| Power Off
On| Power On
1000M
| On| Gigabit connection
Off| Less than Gigabit connection
FP Link/ACT
| On| Active fiber connection
Flashing| Fiber data transfer
Off| Port link is down.
TP Link/ACT
| On| Active copper connection
Flashing| Copper data transfer
Off| Port link is down.
PoE
| On| PoE is being supplied to a connected PD.
Off| No power is being supplied to a connected PD.
SD
| On| Valid optical signal
Off| No valid optical signal
For specifications, visit intellinetnetwork.com. Register your product at register.intellinet-network.com/r/508216 or scan the QR code on the cover
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
Disposal of Electric and Electronic Equipment (applicable in the E.U. and
other countries with separate collection systems) This symbol on the product
or its packaging
means that this product must not be treated as unsorted household waste. In
accordance with EU Directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), this electrical product must be disposed of in accordance
with the user’s local regulations for electrical or electronic waste. Please
dispose of this product by returning it to your local point of sale or
recycling pickup point in your municipality.
WARRANTY INFORMATION
REGULATORY STATEMENTS
FCC Class A
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of Federal Communications Commission
(FCC) Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: reorient or relocate
the receiving antenna; increase the separation between the equipment and the
receiver; connect the equipment to an outlet on a circuit different from the
receiver; or consult the dealer or an experienced radio/TV technician for
help. This device complies with the requirements of CE 2014/30/EU and/or
2014/35/EU. The Declaration of Conformity for is available at: support
.intellinet-network.com/barcode/508216
North & South America
IC Intracom Americas 550 Commerce Blvd. Oldsmar, FL 34677 USA
All trademarks and trade names are the property of their respective owners. © IC Intracom. All rights reserved. Intellinet Network Solutions is a trademark of IC Intracom, registered in the U.S. and other countries intellinetnetwork.com
References
- Intellinet Network Solutions - Provider of PoE and Data Center Product – Intellinet Solutions
- DropCatch.com
- Intellinet Network Solutions Account and Product Registration