INTELLINET 508209 Gigabit PoE+ Media Converter Instructions
- June 8, 2024
- INTELLINET
Table of Contents
Gigabit
PoE+ Media Converter
Instructions Model 508209
Important: Read before use.
For additional benefits:
https://register.intellinet-network.com/r/508209
register your product warranty or go to: register.intellinet- network.com/r/508209
Connections
This product features a pre-installed SC connector that is not removable.
- Connect the fiber optic cable to the pre-installed SC connector.
- Install the other end of the fiber optic cable into an appropriate port in your fiber network.
Maximum length and fiber cable specification depend on the model.
RJ45
Connect the UTP port of the media converter to powered RJ45 device; e.g., to a
network camera. Cat5e or better cabling is recommended.
Power
Plug the power adapter into the input jack on the media converter.
Then connect it to a regular power outlet. Only use the included power adapter
or one with matching specifications.
Setup
Features
The DIP switches on the Intellinet Gigabit PoE+ Media Converter present
helpful options for easily detecting link faults when they occur.
Enabling Link Fault Pass-through (LFP) by switching the LFP DIP switch to “ON”
forces the devices on a link to acknowledge that they are online before data
can be transmitted. When one of the devices doesn’t respond, data cannot be
sent.
If a copper connection breaks when the LFP function is enabled, the
converter’s Link Loss Carry Forward (LLCF) feature stops data transmission and
generates a trap to a management station. Likewise, if a fiber connection
breaks when
Instructions
the LFP function is enabled, the converter’s Link Loss Return (LLR) function will return a no-link condition to its link partner and cease data transmission.
Power over Ethernet+
The Intellinet Gigabit PoE+ Media Converter complies with IEEE 802.3at /
802.3af standards. When the included power adapter is connected to the
converter, the device can supply up to 30 watts of power to a PoE-compliant
powered device.
LED Status
| LED | STATUS | STATUS DESCRIPTION |
|---|---|---|
| PWR | Off | Power Off |
| On | Power On | |
| 1000M | On | Gigabit connection |
| Off | Less than Gigabit connection | |
| FP Link/ACT | On | Active fiber connection |
| Flashing | Fiber data transfer | |
| Off | Port link is down. | |
| TP Link/ACT | On | Active copper connection |
| Flashing | Copper data transfer | |
| Off | Port link is down. | |
| PoE | On | PoE is being supplied to a connected PD. |
| Off | No power is being supplied to a connected PD. | |
| SD | On | Valid optical signal |
| Off | No valid optical signal |
For specifications, visit
intellinetnetwork.com. Register your product
at register.
intellinet-network.com/r/508209 or
scan the QR code on the cover.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
Disposal of Electric and Electronic Equipment (applicable in the E.U. and
other countries with separate collection systems)
**** This symbol on the product or its packaging means that this product must
not be treated as unsorted household waste. In accordance with EU Directive
2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this
electrical product must be disposed of in accordance with the user’s local
regulations for electrical or electronic waste. Please dispose of this
product by returning it to your local poinof sale or recycling pickup point in
your municipality.
WARRANTY INFORMATION
intellinetnetwork.com
REGULATORY STATEMENTS
FCC Class A
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of Federal Communications
Commission (FCC) Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: reorient
or relocate the receiving antenna; increase the separation between the
equipment and the receiver; connect the equipment to an outlet on a circuit
different from the receiver; or consult the dealer or an experienced radio/TV
technician for help.
This device complies with the requirements of CE 2014/30/EU and/or 2014/35/EU.
The Declaration of Conformity for is available at:
support.intellinet-network.com/barcode/508209
North & South America
IC Intracom Americas
550 Commerce Blvd.
Oldsmar, FL 34677 USA| Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221, Taiwan| Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221, Taiwan
---|---|---
All trademarks and trade names are the property of their respective owners. © IC Intracom. All rights reserved. Intellinet Network Solutions is a trademark of IC Intracom, registered in the U.S. and other countries.
support.intellinet-network.com/barcode/508209
Printed on recycled paper.
INT_508209_QIG_0921_REV_5.11
Documents / Resources
|
INTELLINET 508209 Gigabit PoE+ Media
Converter
[pdf] Instructions
508209, Gigabit PoE Media Converter, PoE Media Converter, Gigabit Media
Converter, Media Converter, Converter
---|---
References
- Intellinet Network Solutions - Provider of PoE and Data Center Product – Intellinet Solutions
- DropCatch.com
- Intellinet Network Solutions Account and Product Registration
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>