INTELLINET 561044 24-Port Gigabit Ethernet Switch with 2 SFP Ports Instructions

INTELLINET 561044 24-Port Gigabit Ethernet Switch with 2 SFP Ports

Connections & Indicators

• LEDs
  The LED indicators make it easier to monitor the switch and its connections.

• Ports
  All ports on the switch support Auto-MDI/ MDI-X functionality, so crossover cables and uplink ports are not needed for connections to PCs, routers, other switches, etc. Cat5/5e/6 UTP/STP cables provide optimal performance; if a status LED doesn’t indicate a link, check the corresponding device for proper setup and operation.

• Power
  Use the included power cord to connect the device to an AC outlet. Confirm that the power LED on the front panel is lit.

__

__

Link/ Act/ Speed

| __

Yellow

| Off| No device is connected to the port
On| A device is connected to the port at 10/100 Mbps speed
Flashing| Sending or receiving data
__

Green

| On| A device is connected to the port at 1000 Mbps speeds
Flashing| Sending or receiving data

Placement

Prior to use, it is recommended that the switch be placed/positioned:

• on a level surface that can support the weight of the switch
• with a minimum of 25 mm (approx. 1”) of clearance on the top and sides for adequate ventilation
• away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.
• where it cannot be affected by excessive moisture

Chassis Ground Column (Rear Panel)
Wire the grounding terminal to an earth-grounding object to prevent power spikes.
Rackmount
The switch includes brackets and screws for optional rack mounting.

1. Disconnect any cables from the switch.
2. Position a bracket over the mounting holes on one side of the switch and secure it in place with screws.
3. Repeat Step 2 on the other side of the switch.
4. Position the switch in the rack and screw the brackets to the rack.
5. Reconnect any cables.

For specifications, visit intellinetnetwork.com. Register your product at register.intellinet-network.com/r/561044 or scan the QR code on the cover.

WASTE ELECTRICAL & ELECTRONIC EQUIPMENT

DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT

(Applicable In The European Union And Other European Countries With Separate Collection Systems)

This symbol on the product or its packaging means that this product must not be treated as unsorted household waste. In accordance with EU Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this electrical product must be disposed of in accordance with the user’s local regulations for electrical or electronic waste. Please dispose of this product by returning it to your local point of sale or recycling pickup point in your municipality.

WARRANTY INFORMATION

intellinetnetwork.com

REGULATORY STATEMENTS

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications made to this equipment without the approval of the manuafacturer could result in the product not meeting the Class A limits, in which case the FCC could void the user’s authority to operate the equipment.

This device complies with the requirements of CE 2014/30/EU and/ or 2014/35/EU. The Declaration of Conformity for is available at:

support.intellinet-network.com/barcode/561044

North America
IC Intracom America
550 Commerce Blvd.
Oldsmar, FL 34677
USA

Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221
Taiwan

Europe
IC Intracom Europe
Löhbacher Str. 7, D-58553
Halver
Germany

All trademarks and trade names are the property of their respective owners. © IC Intracom. All rights reserved. Intellinet Network Solutions is a trademark of IC Intracom, registered in the U.S. and other countries.

intellinetnetwork.com

For additional benefits:

Scan to register your product warranty
or go to: register.intellinet-network.com/r/561044

References

• Intellinet Network Solutions - Provider of PoE and Data Center Product – Intellinet Solutions
• DropCatch.com
• Intellinet Network Solutions Account and Product Registration

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>