J Y ELECTRONICS V40093W Wireless Earphones with Charging Case User Manual

J Y ELECTRONICS V40093W Wireless Earphones with Charging Case

Product Information

• Product Model: TWS EARBUDS WITH CHARGING BOX (Model: V40093W)
• FCC ID: 2BB3B-V40093W
• Dimensions: 95.00 mm (length) x 146.00 mm (width)
• Charging Cable Type: type-C
• Input Voltage: DC 5V

Product Usage Instructions

• Charging the Earbuds:

1. Connect the type-C charging cable to the charging box.
2. Plug the other end of the charging cable into a power source with DC 5V input voltage.
3. Ensure that the earbuds are correctly placed in the charging slots of the charging box.
4. The earbuds will start charging automatically.

• Pairing and Connecting:

1. Make sure that the earbuds are fully charged.
2. Take both earbuds out of the charging box.
3. Turn on the device by pressing and holding the power button for 2 seconds.
4. The left earbud will have a blue and red light flashing alternately, while the right earbud will have a blue light flashing every 5 seconds.
5. Open the Bluetooth settings on your device and search for available devices.
6. Select the device name “V40093W” to pair and connect with the earbuds.

• Controlling Music Playback:

1. To play the previous song, double click on the left earbud.
2. To play the next track, double click on the right earbud.
3. To answer or hang up a phone call, click on either earbud.
4. To play or pause music, click on either earbud.

• Additional Functions:

1. To activate the voice assistant, press and hold any earbud for 2 seconds. Pressing the earbud briefly will exit the voice assistant.
2. To reject an incoming call, press and hold any earbud for 2 seconds.
3. To turn off the device, press and hold any earbud for 4 seconds.

Wireless Earphones With Charging case

• TWS EARBUDS WITH CHARGING BOX
  • Model : V40093W
  • FCC ID :2BB3B-V40093W
• (When the earbuds are not in the charging box)
• Press & hold both power buttons simultaneously for 2-3 Seconds
• (When the earbuds are in the charging box just take them out and they will power on automatically.)
• one earbud blue and red light flashes alternately, another ear bud with blue light flash every 5 seconds
• The parameter is incorrect.
• Image size is not supported.
• Each image dimension must be between 40 and 2600 pixels.
• Check your phone’s Bluetooth settings menu.
• Make sure that Bluetooth is turned ON.
• Connect with the device listed as V40091 W.

Controlling Your Earphones

• One Click: Play/Pause/Answer Incoming Call/End Call
• Long press for 2 seconds: Activate Siri/Google Voice Assistants
• Long press for 2 seconds: Reject an Incoming Call
• Hold 3-4 Seconds: Power Off (When Not Recieving a Call)

Play Music

• Previous song: Double click on left ear
• Next track: Double click on the right ear
• Click: answer/hang up the phone
• Click: Play Pause
• Long press for 2 seconds: Voice assistant, short press to exit Long press for 2 seconds: reject incoming call
• Press and hold for 4 seconds to shut down
• Press and hold for 2 seconds to turn on the device

Wearing Your Earphones

Label
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
• These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• The device has been evaluated to meet general RF exposure requirement.
• The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>