maxell MSLEDS-10M Smart LED Strip Multicolor Lights User Manual

maxell MSLEDS-10M Smart LED Strip Multicolor Lights

FEATURES

PARAMETERS

Colour| Input Voltage| Output Voltage(Dc)/ Current(Max)| Size
---|---|---|---
RGB+CCTr| AC100-240V| 24V/2A| **** 10m

WIRING DIAGRAM

INSTALLATION INSTRUCTIONS

1. Use a DC12V power supply.
2. Install the Wi-Fi controller correctly. Use 3M tape to fix it.
3. Please unfold the LED strip to avoid overheating issues. Please connect the cables of the LED strip to the right position on the controller. Test the APP to check if it can control the LED strip correctly. If everything goes well, just keep going.
4. Check and ensure the power supply, Wi-Fi controller, and LED strip are connected correctly.

ATTENTION

1. Do not put any metal around the WIFI controller, which could block the WIFI signal.
2. Ensure the power supply and controller are connected correctly.
3. The power supply output voltage should be the same as the strip working voltage.
4. Do not cover anything on the surface of the power supply, WIFI controller, and LED strip.
5. Ensure the connection is correct before powering.

PRODUCT FUNCTIONS DIAGRAM

1. DC12V input connection port
2. Output connection port to connect to LED strip
3. Function buttons:
   • Press the button once: turn on your device.
   • Press the button twice: turn off your device.
   • Press the button for 6 seconds: reset your device. Press the button quickly once: change to your favorite scenes.
      | LED STRIP RGB+CCT
     ---|---

To Pair

| Initial blue light 50%, lighting flashes
Connected| White light with 100% brightness

DOWNLOAD APP

1. Search “Maxell Smart” from the App store or Google play.
2. Scan the QR code from the label or user manual.

The APP is compatible with Android 4,0 and iOS 8.1 and higher versions.

LOG IN/REGISTER ACCOUNT NUMBER

Open the Maxell Smart App, sign up for a new account or log in with an existing account.

DEVICE PAIRING-EASY IN

1. Turn on the LED strip and enter the home of the APP while ensuring Bluetooth is on and the WIFI signal is good and stable.
2. LED strip will flash when turning on the power supply. Stay at the home page and found the push notification, then click Go to add.
3. Select the Wi-Fi connection to the smart device, input the Wi-Fi password, and then click “Next” to wait for the matching to succeed. (Make sure smart devices share the same Wi-Fi)

CONTROL DEVICE

After the device is connected successfully, tap “Device” at the bottom. The device name of the smart lamp shows in the list. Tap it to enter the control panel of the smart lamp.

1. White mode:
   Adjust the brightness and color temperature of white light.

2. Color mode:
   Adjust the color, brightness, and saturation of colorful light.

3. Scene mode:
   Choose from a variety of scenes or create your own. You can create a scene with movie light, a party scene with colorful light, or even a candlelit scene with warm, low lighting.

4. Sync with music:
   Choose music sync to match color changes to the beat of the music playing on your speakers.

5. Left time:
   Click the “Left time”, and you can choose the length of countdown time from 0 to 23 hours and 59 minutes. If the Smart Wall Light is on when the countdown starts, the Smart Flood Light will turn itself off at the end time.

6. Sleep Mode

7. Click “More”.

8. Click “Plan”.

9. You can select the plan type “Sleep plan”

10. First, configure the hours (left)

11. Next, configure minutes (right)

12. You can customize the repetition time.

13. Click “Save” to save the settings.

14. Wake Mode

15. Click “More”.

16. Click “Plan”.

17. You can select the plan type “Wake up plan”

18. First, configure the hours (left)

19. Next, configure minutes (right)

20. You can customize the repetition time.

21. Click “Save” to save the settings.

22. Schedule:
    This will keep the Strip Light in the ON/OFF position for a specific duration of time.

23. Grouping:
    If you got two or more lights, please tap at the upper right corner of the control panel and create a group. The smart lamp group will realize synchronous switches, color changes, scene mode selection, timer, etc.

APP FUNCTION INTRODUCTION

Click the interface to control it according to the specific mode of the specific LED strip. The following is a public function introduction.

• Remote control: The LED strip can be controlled anywhere after the smart device is successfully connected.
• Timer function: Set the timer to turn on and turn off the LED strip.
• Intelligent scene: The system sets a variety of intelligent scenes, and different scenes correspond to different lighting atmospheres.
• Group: Group control is available(only for the same type of product).Family room management.
• Device Sharing: The device is shared with other user control devices in the home.

Maxell Corporation of America,
3 Garret Mountain Plaza, 3rd
Floor, Suite #300, Woodland Park, NJ 07424.
www.maxell-usa.com.

Maxell Latin America,
PH Oceanía Plaza
Torre 2000, Panama City, Rep. of Panama.
www.maxell-latin.com

Maxell Canada,
8500 Leslie Street,
Suite 101, Markham Ontario,
Canada L3T 7M8.
www.maxellcanada.com

Maxell Europe Limited
Ground Floor, Block E
Sefton Park, Bells Hill Stoke Poges
Buckinghamshire SL2 4HD
Email: hq@maxell.eu

Termék: Okos LED szalag
Maxell Europe Ltd
Hungary Branch Office,
H-1095 Budapest,
Máriássy Utca 7.Hungary
Email: mhb@maxell.eu
www.maxell.eu.

MADE IN CHINA.

References

• Maxell Latinoamérica
• Maxell USA - Home Page
• Maxell Worldwide
• Maxell

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>