LED WORLD LWW-W80-L12 RGBW LED Wall Washer Instructions

: June 4, 2024
: LED WORLD

Table of Contents

Introduction
PRODUCT DIMENSION
PRODUCT SPECIFICATIONS
WORKING MODE
FUNCTION & SETUP
- DMX Mode
- Master/Slave Mode
PHOTOMETRIC PARAMETERS
- Cadela Distribution
- Illuminance At a Distance
CONNECTION
- WATER-RESISTANT TREATMENT
Support
130 10615 48 ST SE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LED WORLD LWW-W80-L12 RGBW LED Wall Washer Instructions

Introduction

4 in 1 RGBW Architecture Wall Washer with High Power LEDs for Indoor/Outdoor use and Color control available via DMX or built-i color settings. Use for lighting building perimeters, casinos, gardens, bridges, shopping centers, theme parks, entertainment plazas and more. The high powered 4in1 LED (Red, Green, Blue and white) use a single LED to produce even and consistence color effects to a solid white and attracts attention and can be seen from far distances.

PRODUCT DIMENSION

Angle adjustable bracket design mounting
Bottom-mounting/LWW-5C

PRODUCT SPECIFICATIONS

Size	L 1240 x W 78 x H 118 mm (48.81” x 3.07” x 4.64”)
Main body	Extruded Aluminium/6063
Weight	5.22kg±5% (11.5lbs)
LED Qty	48pcs Power LED/1W (4 in 1 Chip)
Color	R-12,G-12,B-12,W/WW-12
Input Volt	100V~240V AC
Working Volt	24V DC (Driver)
Power Consumption	52W(Max.)
Lens	25º (4 in 1)
Operation Temp.	-20°C~40°C (-4°F~104°F)

WORKING MODE

Independent Mode: Choose the build-in via the buttons on the end cover.
DMX Mode: International Standard DMX 512 signal (IP67 connector).
Master/Slave Mode: Auto online and synchronization working.

FUNCTION & SETUP

Independent Mode

After pressing A four times (the first three times is the setup on DMX address) or B directly, light enter into independent mode; the digital LEDs show PXY, press A once, active digital LEDs move backward, you can choose function via X and parameter via Y; Press B,the corresponding flash digital LED increases one bit (range:1~9).

X refers to functions (the value between 1 to b),Y refers to value of speed and gray degree for the functions (the value between 1 to 9).When pressing button, please wait for about 10 sec, then you can exit the mode of adjustment function, the digital LED stop flashing and data recorded.

X value

|

Y value

---|---

1-static-red

| 1~9 class grey degree
2-static-green|

1~9 class grey degree

3-static-yellow

| 1~9 class grey degree
4-static-blue|

1~9 class grey degree

5-static-purple

| 1~9 class grey degree
6-static-cyan|

1~9 class grey degree

7-staic white

| 1~9 class grey degree
8-multicolor changing|

1~9 class speed

9-single fading

| 1~9 class speed
A-multicolor fading|

1~9 class speed

B-multicolor flashing

| 1~9 class speed
C-autorun|

1~9 times circle

4CH Function and parameter sheet:

X value

|

Y value

---|---

1-static-red

| 1~9 class grey degree
2-static-green|

1~9 class grey degree

3-static-yellow

| 1~9 class grey degree
4-static-blue|

1~9 class grey degree

5-static purple

| 1~9 class grey degree
6-static-cyan|

1~9 class grey degree

7-staic R+G+B

| 1~9 class grey degree
8-staic white|

1~9 class grey degree

9-white+red

| 1~9 class grey degree
A-white+green|

1~9 class grey degree

B-white+red+green

| 1~9 class grey degree
C-white+blue|

1~9 class grey degree

D-white+blue+red

| 1~9 class grey degree
E-white+blue+green|

1~9 class grey degree

F- white+red+green+blue

| 1~9 class grey degree
G-multicolor changing|

1~9 class speed

H-single fading

| 1~9 class speed
L-multicolor fading|

1~9 class speed

P-multicolor flashing

| 1~9 class speed
U-autorun|

1~9 times circle

DMX Mode

DMX Addressing:
When the digital LED is not flashing,press A,digital LED begin to flash,press A once,active digital LEDs moves backward,you can start to edit the second digital LED;Press B, the corresponding flash digital LED increase one bit (the values between 1 to 9).
DMX Channel instructions-3 Channels available as sheet:

CHANNEL 1

| CHANNEL 2|

CHANNEL 3

---|---|---

Data

Brightness of Blue

***Enter or quit DMX mode automatically once detecting valid signal!!!

DMX Channel instructions-4 Channels available as sheet:

CHANNEL 1

| CHANNEL 2| CHANNEL 3| CHANNEL 4
---|---|---|---
Data| Function| Data| Function| Data| Function| Data|

Function

0~255

| Brightness of Red| 0~255| Brightness of Green| 0~255| Brightness of Blue| 0~255|

Brightness of White

***Enter or quit DMX mode automatically once detecting valid signal!!!

Master/Slave Mode

Choose any one light as the master for attaining auto online function, the operations are as below: firstly, set the address of master as 001,others are set as slave (address can be any one except 001); Change function of the master (001) light, then all lights will work synchronously;

PHOTOMETRIC PARAMETERS

Cadela Distribution

RGB
Red
Green
Blue

Illuminance At a Distance

Beam Angle: 25°

RGB
Red
Green
Blue

Note: The curve is illuminance area under different projection distance and the average illuminance in the area.

CONNECTION

Signal max connection is 100m,more than100m or 60pcs fixtures need a signal amplifier.
Optional controller/Accessories: HUEDA, Wireless DMX Pen.

Note: Cut DMX data cable on the input of the first unit to attach HUEDA DMX Master controller. Use CAT-5 cable and make connections in a water tight sealed electrical box.

WATER-RESISTANT TREATMENT

The signal output connector XLR-3 of the last fixture of each series must be sealed with a 20mm thermal shrinking stube(-1), blow and shrink it with a heat gun;

Caution:

Do not plug them into power when the product is still in package.
Don’t use anything to cover the fixture during application.
Don’t use this product in close environment.
If this product appears to be damaged, do not attempt any repair, please contact the dealer.

Warning:

Neglect on action of the above treatment will lead to failure of waterproof and proper working of the lights.
Make sure the ground connection well avoid electric shock, due to metal housing.
Disconnect power at the breaker before installing.

Support

Copyright © 2021 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specifications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

LED World Inc.