maxell CA-BTVH Hypershock Wireless Headset User Manual

maxell CA-BTVH Hypershock Wireless Headset

LED Indicator Light Description

playing
Standby Mode| Blue LED stays on indefinitely
Low Battery Status| Blue LED flashes 3 times per second
Vibration Switch| * Vibration switch is on: white LED stays on indefinitely

• Vibration switch is off: white LED goes out

Charging Status| Red LED stays on while in charging, red LED goes out while fully charged

Basic Key Operation

• Turn On
  Long press , the headphone will turn on after blue LED stays on for 3 seconds. The headphone will enter the pairing mode.

• Turn Off
  Long press , the blue and green LED will stay on for 2 seconds, then go out, and the headphone will turn off.

• Volume Adjustment
  Short press and to control volume.

• Music Selection

  • Long press to skip to the next song.
  • Long press to skip to the previous song.

• Play/Pause/Phone call

  • Music Pause: Short press when in music playing
  • Music Play: Short press when in music pause.
  • Answer Calls: Short press when a call coming in.
  • Hang Up: Short press when on a call.
  • Refuse to Answer: Long press when a call coming in.
    When Wireless is connected, double press will re-dial the last phone number in your call record.

• Headphone Turn On Status

  • Long press , the headphone will turn on, and the blue and green LED will twinkle alternately. The headphone will enter pairing mode. Turn on the Wireless in your cell phone and search for “UG-05”, click to connect. The blue
  • LED will stay on indefinitely after connected successfully, and the blue LED will flash slowly when music playing.
    *Note: The colorful decoration LED light will turn on automatically after the headphone turns on, and it can be turned off by key combination.

• Vibration Function Switch
  In the power-on status, flip the vibration switch down, the vibration function will be turned on (the white LED stays on indefinitely), and the headphone will vibrate with the bass. The stronger the bass, the stronger the vibration. Flip the vibration switch upward to turn off the vibration (the white LED goes out), then you can listen to music and play games normally, the vibrating speaker will not work, and the music speaker will work normally.

• Colorful Decoration LED Switch
  After the headphones turn on, the colorful LED light will turn on automatically. If you want to turn off the colorful LED light for saving battery or for other reasons, short press the volume up and volume down button simultaneously to turn the LED of The colorful LED can be restarted after turned off.
  *Note: The colorful LED light will not work while the headphone is in charging or in wired mode.

• Boom Microphone
  Equipped with the long boom microphone for a better call experience. The long boom mic is to enhance the call performance. During a call, if you want to talk to others or don’t want to be heard by the person on the other end of the phone, short press the mute button on the microphone to stop the mic from working.
  When the mute is turned on, the headphone will beep. When you need to resume the call, short press the mute button again.

• Auto-off and Long-distance Reconnect
  The headphone will be disconnected automatically when out of the effective range. When back to effective range within 5 minutes, it will auto-connect with your phone. The headphone will turn off automatically if out of the effective for range over 5 minutes.

Headset And Wireless Transmitter Overview

• Charging Mode
  When the headphone is connected to the IOS device, the current power status of the headphone will be showed on the upper right corner of the device screen

• Power Status
  When the headphone is connected to the IOS device, the current power status of the headphone will be showed on the upper right corner of the device screen.

• Line-in Mode
  Plug in audio cable, the headphone turns off automatically, you can listen to the music with the audio cable. You can use the built-in microphone or long boom microphone. Also, you can turn on or off the vibration function by the vibration switch.
  Note: when in line-in mode, the Wireless can’t be turned on. You need to unplug the audio cable and turn on the headphone to use.

Wireless Transmitter LED Indicator Description

For the First Time Using

1. Insert the Wireless transmitter into the USB port of the device, the device will automatically install the driver, the name displayed on the device is: UG-05, and the default is device audio transmission, the transmitter enters the standby state with the red LED lighting on indefinitely.
2. The Wireless device enters the pairing state after power on, long press the button on the Wireless transmitter for 2 seconds to enter the pairing status, and the green LED will flash quickly.
3. The Wireless transmitter is successfully connected with the Wireless device, and the green LED will stay on indefinitely

For the Second Time and Subsequent Using
When there is pairing information of the headphones on the device, for the second time using, the Wireless transmitter will automatically connect back to the Wireless device.

Connect with Other Wireless Devices
Short press the transmitter button, the Wireless transmitter will be disconnected with the current device with the red LED lighting on indefinitely, and the Wireless device will be turned off. Long press the transmitter button for 2 seconds to connect with other devices, the green LED will flash quickly and stay on indefinitely after connected successfully.

Power On/Power Off
Insert the Wireless transmitter into the USB port of the computer and it will automatically turn on./Unplug the Wireless transmitter.

Wireless Connection
Long press the transmitter button for 2 seconds, the Wireless transmitter enters pairing status with the green LED flashing quickly, now it supports listening to music, Wireless video playback, Wireless video calls, etc.

Wireless Disconnection/Clear Connection
Short press the Wireless transmitter button, and the red LED will stay on indefinitely./In any state, long press the transmitter button for 8 seconds, the green and red light will stay on indefinitely.

Headphone Parameters Information

Wireless Transmitter Parameters Information

Packing List

1. Wireless Headphone
2. Boom Microphone
3. Micro USB charging cable
4. Audio Cable
5. User Manual
6. Wireless Transmitter
7. Mic Foam Cover

Warm Tips

1. Please charge the headphone with 5V 1A / 5V 2A charger, high voltage may damage the headphone.
2. When the headphone has not been used for more than 3 months, it needs to be charged before use.
3. When the headphone has not been used for a long time, we suggest you charge every 3 months to provide good protection for the battery.
4. We suggest you fully charge the headphone for the first time use.

Attention

1. Please keep or use the headphone at normal temperature, avoid direct sunlight.
2. Please keep the headphone away from fire or other hot objects.
3. Please keep the headphone away from damp places or submerged in liquid, keep dry
4. Please don’t try to use other methods of charging other than the USB charging cable we provide.
5. Please don’t disassemble, repair, or modify.
6. Please pay attention to excessive clash, if any damage (like dents, deformation, corrosion, etc.), please turn to us for assistance by the contact information on the warranty card.
7. If the headphone produces an abnormal smell, higher than normal temperature, color, or shape changes abnormally, please stop using and turn to us for assistance by the contact information on the warranty card.

Warning

1. If the battery is replaced improperly, there is a danger of explosion. It can only be replaced with a battery of the same type or equivalent. The battery (battery pack or assembled battery) must not be exposed to the conditions such as sunlight, fire, or the similar overheating environment.
2. The device should not be exposed to water droplets or water splashes. It should not be placed in objects such as vases or similar objects filled with liquids.
3. This product is not a children’s toy. Children under the age of 14 need to be accompanied by parents to use.

www.maxell.com

Maxell Corporation of America,
3 Garret Mountain Plaza, 3rd Floor,
Suite #300, Woodland Park, NJ 07424.
www.maxell-usa.com

Maxell Latin America,
PH Oceanía Plaza- Torre 2000,
Panama City, Rep. of Panama.
www.maxell-latin.com

Maxell Canada,
8500 Leslie Street, Suite 101,
Markham Ontario, Canada L3T 7M8.
www.maxellcanada.com

Maxell Europe Limited
Ground Floor, Block E
Sefton Park
Bells Hill
Stoke Poges
Buckinghamshire SL2 4HD
Email: hq@maxell.eu

Termék: Fejhallgató
Maxell Europe Ltd,
Hungary Branch Office,
H-1095 Budapest,
Máriássy Utca 7
Hungary
Email: mhb@maxell.eu
www.maxell.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>