HOOVER HHP30C011 Air Cleaner User Manual

**HOOVER HHP30C011 Air Cleaner User Manual

**

GENERAL SAFETY WARNINGS

• This appliance should only be used for private household use, as described in this user guide.

• Please ensure that this guide is fully understood before operating the appliance and keep for future reference.

• Check if the voltage and ratings indicated on the label of the appliance correspond to the local power voltage before you connect the appliance.

• If the power cord is damaged stop using the appliance immediately.

• To avoid a safety hazard, an authorized HOOVER service engineer must replace the power cord.

• Do not remove the plug by pulling the power cord. Lay the supply cord so nobody will step on or trip over it. Always switch off and unplug the appliance before moving or cleaning the appliance or any maintenance task. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

• Children shall not play with the appliance.

• Cleaning and user maintenance shall not be made by children without supervision.

• The appliance does not remove carbon monoxide (CO) or radon (Rn).

• It cannot be used as safety device in case of accidents with combustion processes and hazardous chemicals.

• Do not continue to use your appliance if it appears faulty.

• Do not block the air inlet or air outlet.

• Do not insert your fingers or objects into the air outlet or the air inlet to prevent physical injury or malfunctioning of the appliance.

• Do not clean the appliance with water, any other liquid, or a (flammable) detergent, nor let them enter the appliance to avoid electric shock and/ or a fire hazard.

• Do not spray any flammable materials such as insecticides or fragrance around the appliance. This appliance is not a substitute for proper ventilation, regular vacuum cleaning, or use of an extractor hood or fan while cooking. Use only consumables, filters or spares recommended or supplied by HOOVER.

• Make sure the filter is properly installed before you switch on the appliance. Avoid knocking against the appliance (the air inlet and outlet in particular) with hardobjects.

• Keep the product dry. Never tilt or empty the product during operation.
  When the appliance is not used for a long time, bacteria may grow on the filters. Check the filters after a long period of disuse. If the filters are very dirty, replace them. HOOVER service:

• To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorized  HOOVER service engineer.

USING ENVIRONMENT

Place and use the product only on a dry, stable, level horizontal surface, so that tipping over is excluded.
Leave at least 20cm free space behind and on both sides of the appliance and leave at least 30cm free space above the appliance.
To prevent interference, place the appliance at least 2m away from electrical appliances that
use airborne radio waves such as TVs, radios, and radio-controlled clocks.
Do not place anything on top of the appliance.
Do not use this appliance when you have used indoor smoke-type insect repellents or in places with oily residues, burning incense, or chemical fumes. Do not place the appliance in any of the following locations:

• On hot surfaces, near hot surfaces, open fire or in direct sunlight, near gas appliances, heating devices or fireplaces;
• Next to or directly above heaters or air conditioning vents, doors, windows, extractor fans, cookers or anywhere that it would be affected by draughts;
• In a bathroom or other areas where the product may be exposed to water splashes, dripping or condensation (e.g. directly below an air conditioner or above an electric kettle);
• In an enclosed space (e.g. in or below a cupboard);
• In an area where the temperature could drop below –20°C or rise above 50°C;
• In a room with major temperature changes, in wet surroundings or in surroundings with high ambient temperatures or high humidity, such as the bathroom, toilet, or kitchen;
• Where it would be obstructed, e.g. by curtains or furniture;
• Where dirt or dust could block the sensor.

CO MONITOR SAFETY INSTRUCTIONS

If CO alarm is activated, you should open all windows and doors (if safe to do so). Turn off all fuel burning appliances if possible and then evacuate the property leaving the windows and doors open. Get immediate medical help for anyone suffering the effects of carbon monoxide poisoning. Do not re-enter the property until the alarm stops. The alarm will stop once the CO has cleared. Do not use fuel burning appliances again until the CO source has been located and rectified by a qualified technician. Avoid using paint, thinners, solvent fumes, air fresheners, aerosol sprays or chemical cleaners near the appliance. This may affect functioning of CO monitor.
To activate the CO monitor, connect the plug to a socket outlet. The CO Alert LED will display green. When the CO monitor detects unsafe level of CO, the CO alarm will ring loudly and the CO Alert button and Air Quality LED Ring will blink in red color. The alarm will continue to ring until the detected CO reduces to a safe level. Touch CO Alert Button for 3 seconds to test the CO Alarm function and the alarm will ring loudly for 5 seconds. Test the alarm monthly and after prolonged absence from thebuilding (e.g. holidays). If the alarm fails to ring after touching the CO Alert Button for 3  seconds, please contact the Hoover customer care center to arrange a qualified technician to repair the fault. If the display indicates that the CO sensor is faulty or end of life has been reached, please contact the Hoover customer care center to arrange a qualified technician to replace  the CO sensor. The expected lifetime of the CO sensor is 7 years and must be replaced after this time. Do not allow small children to press the CO Alert button for 3 seconds as they couldbe subject to excessive noise when the alarm rings.
Operating Humidity: 15 – 90% RH
Operating Temperature: 0°C to + 40°C
Carbon Monoxide affects the body by starving (suffocating) critical organs of oxygen. When CO is inhaled it attaches to the hemoglobin in the blood that normally carries oxygen throughout the body. CO permanently displaces the ability for oxygen molecules to attach to the hemoglobin, thus reducing oxygen to vital organs. The concentration level and time exposed to CO can vary its effects on the body, but experts agree even low levels of carbon monoxide exposure over prolonged periods can have serious and lasting affects to anyone’s overall health.

WARNING:
THE CO ALARM IS DESIGNED TO PROTECT INDIVIDUALS FROM THE ACUTE EFFECTS OF CARBON MONOXIDE EXPOSURE OR PREVENT THE CHRONIC EFFECTS OF CARBON MONOXIDE EXPOSURE. IT WILL NOT FULLY SAFEGUARD INDIVIDUALS WITH SPECIFIC MEDICAL CONDITIONS. IF IN DOUBT CONSULT A MEDICAL PRACTITIONER.

The CO Monitor function is not to be used as, nor implied to be used as a substitute for an EN 50291-1, UL-2034, CSA-6.19 or any other recognized standard certified carbon monoxide alarm where Local or Regional Codes or legislation mandate their use. The CO Monitor function is a supplemental carbon monoxide monitoring device only. Use of this device is at the user’s discretion and implies the understanding and acceptance of its limitations to adhere to codes or legislation where applicable.
This appliance should not be used as a substitute for proper installation, use and maintenance of fuel burning appliances including appropriate ventilation and exhaust systems. The CO monitor mobile and tablet notifications require a functional Wi-Fi connection to operate. They are not a substitute for a third- party emergency monitoring service.

The Environment

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative  consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

The symbol on this appliance indicates that this appliance may not be treated as household waste. Instead it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this appliance, please contact your local city office, your household and waste disposal service or the shop where you purchased the appliance.

Wireless Parameters for Pairing

Hereby, Candy Hoover Group Srl declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.candy- group.com

CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

GETTING TO KNOW YOUR H-PURIFIER

1. Air Outlet

2. Control Panel / Display

3. Product Carry Handle

4. Filter Assembly

5. Air Inlet Cover Handle

6. Filter Release Switch

7. Air Inlet Cover

8. Cord Hook

9. Power Cord & Plug

10.  Transport Location

11.  Storage Hook
    

12. Air Quality LED Ring

13. Power Button

14. Child Lock Button

15. Sleep Mode Button

16. Filter Cleaning Button

17. Pollen Allergy Circle Lamp

18. Pollen Allergy Lamp

19. CO Alert Button & LED

20. Filter Replacement Button

21. Max Mode Button

22. Auto Mode Button

23. Light Control Button

24.  Wi-Fi Button

MULTI SENSOR SYSTEM

Thanks to the Multi Sensor System your product will continuously monitor the indoor air condition in terms of PM10, PM2.5 and Volatile Organic Compounds (GAS).
Each time you switch your product on, the Multi Sensor System will start analyzing the indoor air quality and the Air Quality LED Ring will illuminate with different colors representing real time air quality conditions.

Air Quality LED Ring Color| Indoor Air Quality| *PM 10 value μg/m³| PM 2.5 value μg/m³| GAS VOC Level**
---|---|---|---|---
GREEN| Excellent| 0-50| 0-25| L1
YELLOW| Satisfactory| 50-80| 25-50| L2
ORANGE| Poor| 80-160| 50-100| L3
RED| Very poor| ≥ 160| ≥ 100| L4

• In Pollen Allergy mode, PM 10 values that trigger the air quality level will be lower to minimize the risk for allergic people.

CARBON MONOXIDE (CO) ALERT

H-Purifier is equipped with an alert system that will constantly monitor the indoor air for Carbon Monoxide (CO). When the Carbon Monoxide alarm is activated, the AIR Quality LED Ring and the CO Alert button will flash red simultaniously and an audible alarm will sound. The alarm will remain in operation until the Carbon Monoxide (CO) concentration has reduced to below 50 ppm unless silenced manually by pressing the CO Alert button for 3 seconds. The CO Alert LED shows the working condition of the CO sensor. It appears in green color when the CO sensor is in normal condition, in yellowcolor when the sensor is malfunctioning or exceeds its working life and in red color when CO alert is activated.You can test if the alarm is working properly by pressing the CO Alert Button for 3   seconds, a loud buzzer sound will last for 5 seconds if the alarm works properly.

PREPARING YOUR H-PURIFIER

INSTALL THE FILTER [Fig. 1]

Before using your H-Purifier product you will need to remove the Filter from its protective packaging:

• Remove the Air Inlet Cover from your product, grip the two Air Inlet Cover Handles and pull from the product. [Fig. 1a]
• Remove the plug from the Transportation Location and release the cord from the Storage Hook. [Fig. 1b,c]
• Unlock the Filter Release Switch. [Fig. 1d]
• Remove the Filter from your product and remove the outer packaging. [Fig. 1e,f]
• Refit the Filter into your product. [Fig. 1g]
• Lock the Filter Release Switch. [Fig. 1h]
• Refit the Air Inlet Cover to your product. [Fig. 1i]

USING YOUR H-PURIFIER

SWITCH ON THE PRODUCT [Fig. 2]:

Pull out the power cord from the storage hook and plug into a power supply.
All lights on the Control Panel / Display will fully illuminate for approximately 1 second to indicate a succesful plug in.
The POWER button will be dimly lit and the CO Alert LED will be ON to indicate that the dedicated sensor has started working to monitor the indoor Carbon Monoxide level.

To switch on your product, press the POWER button on the display.
The Air Quality LED Ring will illuminate through all colours in sequence whilst the sensors are analysing the realtime air quality condition. After a few seconds, the Air Quality LED ring will select the appropriate colour for the air quality at that time.Your H-Purifi er product will immediately enter AUTO MODE and begin to purify the indoor air. The AUTO MODE button and the LIGHT CONTROL button on the Display will illuminate.

CONNECT YOUR H-PURIFIER:

In order to access all the H-Purifi ers functions from anywhere, it is suggested to download the hOn App. You will be able to control your product in the most efficient way.

Instructions

1. Download the hOn application from the Apple App Store, Google Play or Huawey App Gallery. You can also download it by scanning the QR code in [Fig. 3]
   
   
   

2. Open the APP, create an account with your e-mail and a password.
3. Confirm and log into the hOn App.
4.  Ensure your mobile device is connected to Wi-Fi.
5.  Ensure your H-Purifi er is switched on. Press and hold the Wi-Fi button on the display for 5 seconds, there will be an audible beep and the Wi-Fi button will start fl ashing to indicate it is waiting for a connection. [Fig. 4]
6. Follow the in app instructions to connect your mobile device to your product.
7.  When successfully paired, the Wi-Fi button on the product will remain illuminated.
8. To reset the Wi-Fi, press & hold the Wi-Fi button for 5 Secs.

H-Purifi er also works with Hey Google and Amazon Alexa.

DISCOVER ALL THE FUNCTIONS

More info on PM 2.5, PM 10 and GAS:

Through the hOn App it’s possible to check on the levels of PM 2.5, PM 10 and GAS (VOC) detected by H-Purifi er. PM indicates fi ne particles (not visible to the human eye) deriving mainly from outdoor pollution such as vehicles and industrial emissions and potentially dangerous to our health in case of prolonged exposure. PM 10 have a size up to 10 µm and are capable of penetrating the upper respiratory tract (nose, trachea, pharynx). PM 2.5 have a size up to 2.5 µm and given their small dimension, they can reach our lungs, thus penetrating deeper into our body. GAS VOC (volatile organic compounds) are volatile chemical compounds with the ability to evaporate easily in the air at room temperature. Deodorants, detergents, glues, adhesives, cosmetics,formaldehyde are just some of the VOCs that could be present in our homes butpotentially harmful to our health in case of prolonged exposure.

MODE Functions:

There are 3 available air purifying modes : AUTO MODE, MAX MODE & SLEEP MODE. Auto mode is the default setting for your product when switched on, all modes can be selected manually by pressing the related button on the display. POLLEN ALLERGY mode can only be activated via the hOn app.

AUTO MODE [Fig. 5]:

This is the default mode of your H-Purifi er product when fi rst switched on. In Auto Mode, the H-Purifi er automatically adjust its fan speed to the actual indoor air quality level to always guarantee an optimal air purification. This is the recommended setting for your product. In AUTO mode, after 30 minutes of excellent air quality, your product will enter an ECO mode (Stand-by function) by pausing the purifying function (fan), the Multi Sensor System will continue to analyse the indoor air and automatically switch on the purifying function when required.

MAX MODE [Fig. 6]:

Press the MAX mode button on the display to activate air purifying at maximum power setting. To exit MAX mode simply select AUTO mode or SLEEP mode.

SLEEP MODE [Fig. 7]:

Press the SLEEP mode button to activate air purifying at the lowest silent power setting. The SLEEP mode button will be dimly lit and all other display lights will be off. This can be  modified by pressing the LIGHT CONTROL button.

POLLEN ALLERGY MODE: [Fig. 8]

The Pollen Allergy mode can only be activated via the hOn APP. You will first be required to activate and register a profile in the app, in order to create your Pollen Allergy Profile. The Pollen Allergy mode works only when AUTO MODE is selected. [Fig. 8c] In Pollen Allergy mode, the appliance continuously receives real time data from the APP about the monitored pollen concentration outdoor, and works automatically to maximize  pollen capturing performance.
Once pollens are captured, they are inactivated to help alleviate allergic symptoms. When Pollen Allergy mode is activated in the App, there are 2 possible notification lamps on the product display.

• The Pollen Allergy Lamp is WHITE [Fig. 8a]: The appliance and the App are monitoring the presence of pollens outdoor and there is no risk.
• The Pollen Allergy Lamp turns YELLOW and the Pollen Allergy Circle lamp is WHITE [Fig. 8b]: The appliance and the APP have detected risk.

If the product is manually put into SLEEP mode or MAX mode whilst Pollen Allergy mode is activated, the Pollen Allergy mode will stop.

LIGHT CONTROL Function: [Fig. 9]

There are 3 settings available for the display lighting: On, Dim & Off. To adjust the brightness of the display simply press the LIGHT CONTROL button on the display to cycle through the 3 available options. ON is the default setting. If OFF is selected, any other button will need to be pressed twice to activate, after one press, the lights will become DIM, on second press the action will be activated.

CHILD LOCK Function: [Fig. 10]

Press and hold the CHILD LOCK button for 3 seconds to activate this function, an audible sound will be heard when it has been activated and the CHILD LOCK button will remain illuminated. No other buttons will work when activated. To exit, simply press and hold the CHILD LOCK button for 3 seconds, an audible sound will be heard confirm it is off and the button will no longer be illuminated.

FILTER CLEANING ALERT Function [Fig. 11]:

H-Purifier monitors the condition of the filter. When the FILTER CLEANING button turns yellow, it means that the external layer of the filter needs to be cleaned. You can use a vacuum cleaner to clean it. See ‘Maintaining your H-Purifier’ 4.1 section. After cleaning the external layer of the filter, press and hold the FILTER CLEANING button for 3 seconds to reset the alert.

FILTER REPLACEMENT ALERT Function [Fig. 12]:

H-Purifier monitors the condition of the filter. When the FILTER REPLACEMENT button turns yellow, you need to replace the filter. See ‘Maintaining your H-Purifier’ 4.1 section. After replacing the filter, press and hold the FILTER REPLACEMENT button for 3 seconds to reset the alert.

MAINTAINING YOUR H-PURIFIER

FILTER MAINTENANCE

Your H-Purifier will monitor the condition of your filter. The FILTER CLEANING button or FILTER REPLACEMENT button will turn yellow when action is required to clean or change the filter.

Cleaning / Replacing the Filter: [Fig. 13]

• Remove the Air Inlet Cover from your product. [Fig. 13a]
• Unlock the Filter Release Switch. [Fig. 13b]
• Remove the Filter from your product. [Fig. 13c]
• Use a Vacuum Cleaner to clean the external layer of the Filter or Replace with a NEW filter. [Fig. 13d]
• Refit the Filter into the product. [Fig. 13e]
• Lock the Filter Release Switch. [Fig. 13f]
• Refit the Air Inlet Cover to your product. [Fig. 13g]
• Plug in your appliance to the power supply and switch on.
• Press the FILTER CLEANING button or FILTER REPLACEMENT button to reset the Cleaning/ Replacing alert by holding the button for 3 secs, an audible alert will be heard to indicate a successful reset. [Fig. 11,12]

STORAGE OF YOUR H-PURIFIER

1. Switch off the H-Purifier and unplug the power cord.
2. Clean all the internal and external surfaces of the H-Purifier and the external layer of the Filter.
3. Ensure all components are dry.
4. Remove the Air Inlet Cover [Fig. 14a], tidy up the power cord, fit it into the Storage Hook and fit the plug into the Transportation Location. [Fig. 14c,d] Refit the Air Inlet Cover [Fig. 14e]
5. Store the H-Purifier in a cool dry place

ALERTS & SOLUTIONS

The following codes may appear during use. [Fig. 15]

external layer of the Filter.2.  Reset the alert by holding the FILTER CLEANING button for 3 secs. Refer to 4.1 FILTER MAINTENANCE
FILTER REPLACEMENTbutton turns yellow| Filter replacement Alert| **** Suggest to replace the Filter.| 1.  Replace the Filter. 2. Reset the alert by holding the FILTER REPLACEMENT Button for 3 secs. Refer to 4.1 FILTER MAIN 3. TENANCE
FILTER CLEANING button and FILTER REPLACEMENT button blink| Error: an error occurred with the air purifier, please check possible solutions| **Filter is not in position or is not correctly locked| 1.  If filter is not present, put it back.2.  If filter is in position, check whether the FilterRelease Switch is on LOCK status.Refer to 2.1 INSTALL THE FILTER
****/| Error: an error occurred with the air purifier, please check possible solutions| ****PM sensor malfunctioning| PM sensor failure or sensor wire has not beenconnected well, please call service center to fix.
****CO Alert LED is yellow| Error: an error occurred with the air purifier, please check possible solutions| ****CO sensor malfunctioning or CO sensor exceeds its working life.| Call service center to fix.
/| Error: an error occurred with the air purifier, please check possible solutions| ****Motor failure**| Motor failure or motor wire has not beenconnected well, please call service center to fix.

ATTENTION:
If any of these failures persist, contact your local Hoover representative. DO NOT try to disassemble the H-Purifier by yourself.

TROUBLESHOOTING

The following is a list of commonly encountered problems and solutions.
If any of these problems persist contact your local Hoover representative

The Fan does not work (Control Panel / Display Lights on)|

• Check the alert showing on the display or in the app. If there is, refer to
  6. ALERTS AND SOLUTIONS

• _Check if there are any obstructions in the fan. If there is, first unplug the product, and clear them, or callservice center to clear.•    Check if the H-Purifier is switched on.•    Check if the Filter is correctly installed and in locked status.•    Check if the H-Purifier is in a completely vertical position and not leaning.•    The H-Purifier may be in the ECO mode. You could press Sleep Mode Button or Max Mode Button toexit the ECO mode. Refer to 3. _USING _ _YOUR H-PURIFIER – AUTO MODE .
  

---|---
The Fan does not work (Control Panel / Display Lights off)|

• Check if the H-Purifier is plugged in and switched on.
•    Check the alert showing in the app. If there is, refer to

6. ALERTS AND SOLUTIONS.

No lights on Control Panel / Display (Fan working)|

• In Sleep Mode, the default lights setting is off. You could press the Light Control Button to turn on the lights.
• The lights may be switched off. Press the Light Control Button to turn on the lights. Refer to

3. USING YOUR H-PURIFIER – SLEEP MODE / LIGHT CONTROL Function.

Buttons on the Control Panel do not operate|

• Child Lock may be activated. You could press and hold the CHILD LOCK button for 3 seconds to exit. Refer to

3. USING YOUR H-PURIFIER – CHILD LOCK Function.

Air flow is weak|

• Check if the protective packaging has been removed from the filter.
• Check if there are any obstructions in the Air Inlet Cover or Air Outlet. Remove the Air Inlet Cover and check the Filter condition. Clean the external layer or replace the Filter if needed. You could check the Filter Life status in the hOn App
• Check if the H-Purifier is in Sleep Mode. The Fan operates at reduced power in this mode.

H-Purifier is operating loudly|

• Check if there are any obstructions in the H-Purifier.
• Check if the H-Purifier is running in Max Mode. The Fan operates at maximum power in this mode.

H-Purifier operates loudly suddenly|

• Check if the H-Purifier is running in Auto Mode and the Air Quality LED Ring is not green. In Auto Mode, the H-Purifier automatically adjust its fan speed to the actual indoor air quality level. Refer to

3. USING YOUR H-PURIFIER – AUTO MODE.

H-Purifier makes a loud buzzersound all of a sudden|

•  The testing function of CO Alert button is activated by mis-operation. The sound will automatically stopafter 5 seconds. Refer to

1.2 CARBON MONOXIDE (CO) ALERT

IMPORTANT INFORMATION

Hoover Spares and Consumables

Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or direct from Hoover. When ordering parts always quote your model number

Quality

Hoover’s factories have been independently assessed for quality. Our products are made using a quality system which meets the requirements of ISO 9001.

Your Guarantee

The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee. Subject to change without notice.

References

• Hoover – официальный интернет-магазин бытовой техники
• Officielle hjemmeside af Hoover | Hoover

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>