CLOSETMAID 10845 Workbench Instruction Manual

: June 8, 2024
: ClosetMaid

10845 Workbench

closemnaid

Workbench

INSTALLATION INSTRUCTIONS

SAFETY PRECAUTIONS

BEFORE BEGINNING

Please read all instructions carefully.
Familiarize yourself with all parts (see “PARTS”) and check quantities.
Follow all safety precautions (see “SAFETY PRECAUTIONS”).

WARNING

CHOKING HAZARD FOR SMALL CHILDREN. This unit
contains small parts which could be a choking hazard for small children. Children should be under adult supervision at all times or serious injury could occur.
ALWAYS UNLOAD UNIT PRIOR TO MOVING THE UNIT.
The weight of personal belongings can cause the unit to become unstable and either tip or collapse. Serious bodily injury and/or damage to personal belongings may occur.
DO NOT OVERLOAD UNIT. If any shelf, top, or bottom
of unit bows or bends, it is overloaded. The shelf, top, or bottom could collapse and cause serious bodily injury and/ or damage to personal belongings. Evenly distribute loads.
DO NOT CLIMB OR STEP ON THE UNIT. The unit may
become unstable and either tip or collapse. Serious bodily injury and/or damage to personal belongings may occur.
DO NOT USE THIS UNIT AS A TELEVISION STAND.
Serious bodily injury and/or damage to personal belongings may occur.
DO NOT MOUNT OR ATTACH ANYTHING TO THE SIDES, REAR, OR FRONT OF THE UNIT. This can create a force which can cause the unit to tip. Serious bodily injury and/or damage to personal belongings may occur.
DO NOT STACK UNITS. Stacking of units can cause an unsafe tip-over hazard which may cause serious bodily injury and/or damage to personal belongings.
DO NOT HANG THIS UNIT ON THE WALL. The product structure is not designed for wall hanging. Serious bodily injury, damage to personal belongings, and/or damage to the wall may occur.
PROTECT YOUR WORK SURFACE DURING ASSEMBLY. We recommend you protect your work surface during assembly to prevent scratching or damage to table tops, wood floors, etc.
UNIT DOES NOT PROVIDE PROTECTION AGAINST ELECTRICAL SHOCK.

STOP FOLLOW INSTRUCTIONS

CAREFULLY

Please do not return product to the retail store. For product assistance and warranty information please call Consumer Affairs at 1-800-874-0008.

Manufacturer Warranty

Manufacturer will replace any missing or damaged part due to manufacturer defect for one year after purchase. Please have proof of purchase for warranty claims.

· Do not let any sharp objects touch or rub the surface of the product.
· When assembling, do not let children play around the working area.
· Please confirm all parts are correct before starting the assembly process.
· DO NOT OVERTIGHTEN. DO NOT USE POWER TOOLS. Power tools can overtighten screws and strip threads.

We recommend you hand-tighten screws. Please note location of predrilled holes.

PARTS

Call 1-800-874-0008 for parts and service. For faster service, have the style number ready when calling.

TOOLS REQUIRED

Level

HARDWARE PROVIDED

|

Name

|

Qty.

---|---|---

AA

|

Allen Wrench

|

1

BB

|

M8 x 20 mm. Bolt

|

8 + 1

PARTS

Call 1-800-874-0008 for parts and service. For faster service, have the style number ready when calling.

PRODUCT

|

Name

|

Qty

|

Part #

---|---|---|---

A

|

Workbench Top

|

1

|

35880

B

|

Workbench Legs

|

2

|

35881

C

|

Adjustable Feet

|

4

|

20621

*Please note location of predrilled holes on each part.

STEP 1: Attach workbench legs to table top.

Align one workbench leg (B) with one end of the workbench top (A) as shown.
Use the allen wrench (AA) to secure the workbench leg (B) to workbench top (A) using four M8 x 20 mm. bolts (BB).
Repeat steps for other leg.

bench list

*Please note location of predrilled holes on each part.

STEP 2: Attach adjustable feet.

Align the four adjustable feet (C) with the bottom four holes on the workbench legs (B). Screw the feet in to secure.
Stand the unit up on the feet. Use a level to determine if any changes need to be made to the adjustable feet.

Maximum height extension for adjustable feet is 1.5 in.
Please note location of predrilled holes on each part.

Medium-Cabinet

INSTALLATION INSTRUCTIONS

SAFETY PRECAUTIONS

BEFORE BEGINNING
• Please read all instructions carefully.
• Familiarize yourself with all parts (see “PARTS”) and check quantities.
• Follow all safety precautions (see “SAFETY PRECAUTIONS”).

WARNING

• CHOKING HAZARD FOR SMALL CHILDREN. This unit
contains small parts which could be a choking hazard for
small children. Children should be under adult supervision
at all times or serious injury could occur.

• DO NOT OVERLOAD UNIT. If any shelf, top, or bottom
of unit bows or bends, it is overloaded. The shelf, top, or
bottom could collapse and cause serious bodily injury and/
or damage to personal belongings. Evenly distribute loads.

• DO NOT CLIMB OR STEP ON THE UNIT. The unit may
become unstable and either tip or collapse. Serious bodily
injury and/or damage to personal belongings may occur.

• DO NOT HANG THIS UNIT ON THE WALL. The product
structure is not designed for wall hanging. Serious bodily
injury, damage to personal belongings, and/or damage to
the wall may occur.

• DO NOT USE THIS UNIT AS A TELEVISION STAND.
Serious bodily injury and/or damage to personal
belongings may occur.

• DO NOT STACK UNITS. Stacking of units can cause an
unsafe tip-over hazard which may cause serious bodily
injury and/or damage to personal belongings.

• DO NOT MOUNT OR ATTACH ANYTHING TO THE SIDES,
REAR, OR FRONT OF THE UNIT. This can create a force
which can cause the unit to tip. Serious bodily injury and/or
damage to personal belongings may occur.

• PROTECT YOUR WORK SURFACE DURING ASSEMBLY.
This can prevent scratching or damage to table tops,
wood floors, etc.

• UNIT DOES NOT PROVIDE PROTECTION AGAINST ELECTRICAL SHOCK.

STOP FOLLOW INSTRUCTIONS CAREFULLY

Please do not return product to the retail store.
For product assistance and warranty information
please call Consumer Affairs at 1-800-874-0008.

Manufacturer Warranty
Manufacturer will replace any missing or damaged part
due to manufacturer defect for one year after purchase.
Please have proof of purchase for warranty claims.

• Do not let any sharp objects touch or rub the surface of the product.
• When assembling, do not let children play around the working area.
• Please confirm all parts are correct before starting the assembly process.
• DO NOT OVERTIGHTEN. DO NOT USE POWER TOOLS. Power tools can overtighten screws and strip threads.

We recommend you hand-tighten screws.
Please note location of predrilled holes.

PARTS

Call 1-800-874-0008 for parts and service. For faster service, have the style number ready when calling.

TOOLS REQUIRED

|

Name

|

Qty.

---|---|---

AA

|

ST6.3 x 12 mm. Screw

|

28 + 2

BB

|

Electrical Bushing

|

1

CC

|

M6-1.0 x 12 mm. Bolt

|

4

DD

|

Key

|

2

PARTS

Call 1-800-874-0008 for parts and service. For faster service, have the style number ready when calling.

PRODUCT

|

Name

|

Qty

|

Part #

|

Name

|

Qty

|

Part #

---|---|---|---|---|---|---|---

A

|

Left Side Panel

|

1

|

35857

|

G

|

Caster without Brake

|

2

|

20624

B

|

Right Side Panel

|

1

|

35858

|

H

|

Caster with Brake

|

2

|

20624

C

|

Back Panel

|

1

|

35859

|

I

|

Bottom Shelf

|

1

|

35860

D

|

Top Panel

|

1

|

35854

|

J

|

Inner Shelf

|

1

|

35867

E

|

Bottom Panel

|

1

|

35856

|

K

|

Left Door

|

1

|

35868

F

|

Door Frame

|

1

|

35865

|

L

|

Right Door

|

1

|

35869

STEP 1: Attach side panels to back panel.

Align both side panels (A & B) with the back panel (C) as shown.
Slide the metal tabs on the back panel (C) into the matching slots on the side panels (A & B). Pull the side panels down to secure the tabs in place.

*Please note location of predrilled holes on each part.

STEP 2: Attach top panel.

Align top panel (D) with the top of the unit as shown.
Push in to secure into place. Make sure that all the triangular tabs on the back and side panels completely snap into place in the square holes on the top panel.

*Please note location of predrilled holes on each part.

STEP 3: Attach bottom panel.

Align bottom panel (E) with the bottom of the unit as shown.
Push in to secure into place. Make sure that all the triangular tabs on the back and side panels completely snap into place in the square holes on the bottom panel.

*Please note location of predrilled holes on each part.

STEP 4 Attach door frame.

Align the door frame (F) with the front of the unit as shown. Please note that the holes on the bottom of the door frame will match up with the upper holes on the bottom panel.
Use a #3 Phillips screwdriver to secure the door frame to the unit using twelve ST6.3 x 12 mm. screws (AA).

*Please note location of predrilled holes on each part.

STEP 5: Attach casters.

Align two casters without brakes (G) with the lower holes on the bottom panel (E). Use a #3 Phillips screwdriver to secure the casters to the unit using eight ST6.3 x 12 mm. screws (AA).
Align two casters with brakes (H) with the upper holes on the bottom panel (E). Use a #3 Phillips screwdriver to secure the casters to the unit using eight ST6.3 x 12 mm. screws (AA).

*Please note location of predrilled holes on each part.

STEP 6 Attach shelves.

Stand the unit up on the casters.

Place the bottom shelf (I) inside the unit at the bottom. Push down to secure into place, making sure all metal tabs are connected. Please note that the bottom shelf is larger than the inner shelf and will rest on the lowest three metal tabs on the back panel.

Determine where you want to position the inner shelf (J). Place the shelf above the tabs on the inner side tracks of the unit and push down to secure, making sure all metal tabs are connected.

*Please note location of predrilled holes on each part.

STEP 7 (Optional) Attach unit to workbench top.

Note: This step is only if you are planning to attach a workbench top (sold separately). If not, skip to next step.

Place cabinets next to each other and align workbench top with the top of the units. For each cabinet, use a 10 mm. wrench to attach four M6-1.0 x 12 mm. bolts (CC) through the top panel into the workbench top.

*Please note location of predrilled holes on each part.

STEP 8 Attach electrical bushing.

Align the electrical bushing (BB) with the large circle on the back of the unit. Push in to secure.

*Please note location of predrilled holes on each part.

STEP 9 Attach doors.

Align the right door (L) with the right side of the unit. Place the bottom lock of the door in the hole on the bottom of the door frame. Pull the top lock down, align it with the hole on the top of the door frame, and push up to lock into place. Push the bottom lock down to completely secure the door. Make sure both locks are turned inward toward the door as shown below. Please note that the right door has the slot for the key lock.

Repeat steps for the left door (K) on the left side of the unit.

Double check that all locks are in position and secure.

attach