SHAQ B425146 4-In-1 Burger Press User Guide
- June 4, 2024
- SHAQ
Table of Contents
SHAQ B425146 4-In-1 Burger Press
INCLUDED IN PACKAGING
-
1x 4-in-1 Burger Press:
(1) Slider Ring
(2) ¼ lb Ring
(3) Press Top
(4) Press Cap
(5) Release Plate (6) Base Cap (½ lb – ¾ lb Ring) -
30x Sheets of Patty Paper (Diameter: 11cm)
HOW TO USE
- Load the base cap with approximately three ounces of hamburger meat (of your choice) and compress the meat with the press top. Remove the cap and press again with the top to create a pocket for stuffi ng ingredients.
- Fill the indentation with your favorite ingredients (e.g. crumbled bacon, onions, tomatoes, peppers, cheese…etc.).
- Add another three ounces of hamburger on top to cover the stuffing.
- Place the cap back on to the top and fi rmly press down on the patty.
- Push up from the bottom to remove the patty from the base.
- Makes restaurant-style sliders and burger patties based on the ring size used for the meat. Fits most buns.
PRODUCT SPECIFICATIONS
- Size of product itself: 14×7.5cm
- Net weight of product itself: 235g
- Single package size: 14.3×7.9×14.3cm
- Net weight of product including package: 270g
- Material: ABS
1-YEAR LIMITED MANUFACTURER’S WARRANTY
Your SHAQ product is backed by a one-year limited manufacturer’s warranty. For
a period of one year following date of purchase, SHAQ will repair or replace
your product should it fail due to a manufacturer’s defect (subject to certain
limitations such as, but not limited to, use of the product as directed or
performing the intended function during which the product may become damaged).
This one-year limited warranty does not cover any damage that results from
unauthorized or improper use, service, or repair. Further, it does not cover
damage caused by accident, negligence, purposeful harm, or normal wear and
tear. Should you discover your SHAQ product is not functioning properly,
please send your product to our repair center for evaluation, at the address
listed below.
If your product cannot be repaired or serviced, we reserve the right to
exchange it for a similar or newer model.
Please note that a flat processing fee of $3.00 will be charged to cover the
service evaluation and return shipping of your product. All limited warranty
claims must be accompanied by a copy of your proof of purchase from an
authorized retailer. Please send your product, proof of purchase, and a check
or money order in the amount of $3.00 made out to SHAQ to:
Address:
SHAQ Services
3069 Taft Street
Hollywood, FL 33021
Contact:
warranty@colstonappliances.com
By purchasing this product and/or utilizing this limited warranty, you
expressly waive the right to be a member of or the lead plaintiff in any class
action or any group civil action against the manufacturer and agree that any
dispute involving SHAQ shall be resolved in Broward County, Florida as the
exclusive jurisdiction in any court case and/or proceeding.
