SIEMENS TQ717D03 Fully Automatic Coffee Machine Instruction Manual

: August 16, 2024
: SIEMENS

SIEMENS TQ717D03 Fully Automatic Coffee Machine

Product Information

Specifications

Model : EQ.700 integral TQ7
Type : Fully automatic espresso machine
Brand : Siemens Home Appliances

Product Usage Instructions

Initial Setup
Before using the espresso machine for the first time, follow these steps:

Register your appliance on My Siemens for exclusive services.
Read the safety instructions carefully to ensure safe operation.
Check the contents of the package to ensure all parts are present.
Install the water filter to reduce scale build-up and impurities in the water.

Basic Operation
To operate the espresso machine:

Ensure the machine is plugged into a suitable power source.
Fill the water tank with fresh water and coffee beans in the grinder.
Use the touch display to select your desired coffee type, aroma level, and temperature.
Place a cup under the coffee outlet and start the brewing process.

Cleaning and Maintenance
To keep your espresso machine in top condition:

Regularly clean the drip tray and milk system to prevent blockages.
Descaling the machine periodically to remove mineral deposits.
Follow the manufacturer’s guidelines for replacing filters and other consumables.

Safety

Observe the following safety instructions.

General information

Read this instruction manual carefully.
Keep the instruction manual and the product information safe for future reference or for the next owner.
Do not connect the appliance if it has been damaged in transit.

Intended use

Only use this appliance:
for preparing hot drinks.
In private households and in enclosed spaces in a domestic environment.
up to an altitude of max. 2000 m above sea level.

Restriction on user group

This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers.
Do not let children play with the appliance.
Children must not perform cleaning or user maintenance unless they are at least 8 years old and are being supervised.
Keep children under the age of 8 years away from the appliance and power cable.

Safety information

WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.

Keep packaging material away from children.
Do not let children play with packaging material.
- Children may breathe in or swallow small parts, causing them to suffocate.
Keep small parts away from children.
Do not let children play with small parts.

WARNING ‒ Risk of electric shock!
Incorrect installation is dangerous.

Connect and operate the appliance only in accordance with the specifications on the rating plate.
Connect the appliance to a power supply with alternating cur-rent only via a properly installed socket with earthing.
The protective conductor system of the domestic electrical in-stallation must be properly installed.
- If the appliance or the power cord is damaged, this is dangerous.
Never operate a damaged appliance.
Never operate an appliance with a cracked or fractured surface.
Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
If the appliance or the power cord is damaged, immediately un-plug the power cord or switch off the fuse in the fuse box.
Call customer services. → Page 64
- Improper repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist staff.
Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be re-placed by the manufacturer, the manufacturer’s Customer Ser-vice or a similarly qualified person in order to prevent any risk.
- An ingress of moisture can cause an electric shock.
Never immerse the appliance or the power cord in water.
Liquids must not be spilled on the appliance plug connection.
Only use the appliance in enclosed spaces.
Never expose the appliance to intense heat or humidity.
Do not use steam- or high-pressure cleaners to clean the appli-ance.

WARNING ‒ Risk of fire!
The appliance will become hot.

Ventilate the appliance adequately.
Never operate the appliance in a cabinet.
- It is dangerous to use an extended power cord and non-approved adapters.
Do not use extension cables or multiple socket strips.
Only use adapters and power cords approved by the manufac-turer.
If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted.

WARNING ‒ Risk of burns!
Some parts of the appliance become very hot.

Never touch hot appliance parts.
After use, allow hot appliance parts to cool down before touch-ing.

WARNING ‒ Risk of scalding!
Freshly prepared drinks are very hot.

Leave drinks to cool down if necessary.
Do not let escaping liquids or steam come into contact with your skin.
- A remote start via the Home Connect app while the appliance is unattended may cause scalding to third parties.
Do not reach under the coffee outlet during the dispensing of drinks.
Keep other persons, in particular children, away from the appli-ance.

WARNING ‒ Risk of injury!
Improper use of the appliance may endanger the user.

To avoid injuries, only use the appliance for its intended pur-pose.
Trapped fingers when closing the appliance door.
Be careful of your fingers when closing the appliance door.
The grinder rotates.
Never reach into the grinder.

WARNING ‒ Danger: Magnetism!
The appliance contains permanent magnets. These may affect electronic implants, e.g. pacemakers or insulin pumps.

People with electronic implants must stand at least 10 cm away from the appliance.
This minimum distance of 10 cm must also be observed for the water tank when removed.

WARNING ‒ Risk of harm to health!
Soiling on the appliance may be harmful to health.

To ensure hygiene, follow the cleaning instructions for the appli-ance.

Environmental protection and saving energy

Disposing of packaging
The packaging materials are environ-mentally compatible and can be re-cycled.

Sort the individual components by type and dispose of them separ-ately.

Tips for saving energy
If you follow these instructions, your appliance will use less energy. Set the interval for automatic switch-off to the smallest value.

If the appliance is not being used, it will switch itself off earlier.
Do not interrupt the dispensing pro-cess prematurely.
The amount of water or milk that is heated is used optimally.
Descale the appliance regularly.
a Limescale deposits increase the appliance’s energy consumption.

Installation and connection

Scope of delivery
After unpacking all parts, check for any damage in transit and complete-ness of the delivery.

Note : Different accessories are en-closed depending on the appliance model. This accessory is shown in a frame with a dashed line.

→ Fig. 1

A Fully automatic coffee machine
B Milk container
C Milk tube
D Adapter for milk containers 1
E User manual
F Insertion aid for water filter
G Descaling tablet 1
H Cleaning tablet 1
I Water filter
J Water hardness testing strip

Depending on the appliance specifications

Installing and connecting the appliance

ATTENTION!
Risk of damage to the appliance. If the appliance is not started up correctly, it may be damaged.

Use the appliance in frost-free rooms only.
If the appliance has been transported or stored below 0 °C, wait 3 hours at room temperature before starting it up.
After plugging in, always wait approx. 5 seconds.

Place the appliance on a level, water- resistant surface that is capable of bearing its weight.
Using the mains plug, connect the appliance to an earthed socket that has been correctly installed.

Familiarising yourself with your appliance

Appliance
You can find an overview of the parts of your appliance here.
Note : Individual details and colours may differ, depending on the appliance model.
→ Fig. 2

Milk container
Touch fields
Cup heater1
Aroma lid
Bean container
Rotary selector for grinder setting
Tablet compartment
Cover for water tank
Water tank
Touch display
Brewing chamber door
Cup lighting
Rating plate
Milk system
Beverage outlet cover
Drip tray

Depending on the appliance specifications

Controls
You can find an overview of the controls for your appliance here.
Touch fields
Here you can find an overview of the symbols that are always visible.

Touch display
The touch display functions both as a display and a control.

Note : When the appliance is switched on, you have additional operating options with relevant displays and messages, e.g. beverage settings.

Accessories

AccessoriesUse original accessories. These have been made especially for your appliance.

Accessories	Retail	Customer service
Cleaning tablets	TZ80001A

TZ80001B

| 00312097

00312098

Descaling tablets| TZ80002A

TZ80002B

| 00312094

00312095

Water filter| TZ70003| 00575491
Water filter pack of 3| TZ70033A| –
Microfibre cloth| –| 00460770
Care set| TZ80004A

TZ80004B

| 00312105

00312106

Adapter for milk containers| TZ70001| 17006005

Before using for the first time

Prepare the appliance for use.
Preparing and cleaning the appliance
Remove the protective foils and clean the appliance and individual parts. Follow the illustrated instructions at the beginning of this manual.

ATTENTION!
Unsuitable beans can block the grinder.

Only use pure, roasted bean mixes that are suitable for use in fully automatic coffee or espresso machines.
Do not use glazed coffee beans.
Do not use caramelised coffee beans.
Do not use coffee beans that have been treated with additives containing sugar.
Do not add instant coffee.

→ Fig. 3 – 24

Note : Fill the water tank each day with fresh, cold, non-carbonated water.
Tip: To keep the coffee beans at their best, store them in a sealed container in a cool place.
You can keep the coffee beans in the bean container for several days without them losing their aroma.
Checking the water hardness
It is important to set the water hardness correctly so that your appliance indicates in good time that it needs descaling. You can use the enclosed test strip to check the water hardness or ask your local water company.

Briefly dip the test strip in fresh tap water.
Allow the water to drain off the test strip.
Read the water hardness off the test strip after 1 minute. The table shows allocation of the levels to the different degrees of water hardness:

Factory setting

Note : Please use the test strip even if you have a water softening system installed as they generate different water hardnesses.
Tips

You can change the settings at any time.
If the water hardness exceeds 21 °dH (3.8 mmol/l), you can fill the water tank with prefiltered water to reduce limescale deposits.

Water filter
You can use a water filter to minimise limescale deposits and reduce impurities in the water.

Inserting the water filter
ATTENTION!
Possible damage to the appliance due to limescale build-up.

Change the water filter in good time.
Change the water filter after 2 months at the latest.
Observe the display messages.

Press ****
Press “INTENZA filter” and follow the instructions on the display.

Changing or removing the water filter
You can also operate your appliance without a water filter.

Press ****⁠.
Press “INTENZA filter”.
Press “Replace” or “Remove” and follow the instructions on the dis-play.

Tips

You should also change your wa- ter filter for reasons of hygiene.
With a water filter you need to de- scale your appliance less fre-quently.
If you use a water filter, your coffee will be more flavoursome.
If your appliance has not been used for a long time, for example if you were on holiday, you should rinse the water filter before use by dispensing a cup of hot water.
The water filter can be purchased from retailers or customer service.

Performing initial start-up
After connecting the appliance to the power supply, configure the settings for initial start-up. Initial start-up only appears when switching on for the first time.

Press ****to switch the appliance on.
Follow the instructions on the dis-play.

The display will guide you through the programme.
Notes

If you want to set up Home Connect now, follow the instructions in the Home Connect app.
If “Demo mode” is selected, only the displays will work. You cannot dispense a beverage or run a pro-gramme.

General information
Please bear this information in mind so that you can get the best out of your appliance.
Notes

The appliance has been programmed at the factory with stand-ard settings for optimum operation.
The grinder has been factory-set for optimum operation. If coffee is only dispensed drop by drop or is too thin and with too little crema, you can adjust the grinding level when the grinder is running.
During operation water droplets may form at the ventilation slits and on the lid of the tablet com-partment.
If you do not perform any actions on the appliance for a certain period, it will switch off automatic-ally. You can change the duration in the basic settings.
For technical reasons steam can escape from the appliance.
The first beverage will not yet have its full aroma if:
- You are using the appliance for the first time.
- You have run a service pro-gramme.
- You have not used the appli-ance for a long time.

Do not drink the beverage.
Tip : You will get a stable, fine-pored crema after you have started up your appliance and dispensed a few cups.

Basic operation

Switching the appliance on or off

Press ****⁠.
When the appliance switches on, the display shows the logo. When the appliance is switched on or off, it will rinse itself automatically. When switched off, the appliance will emit steam into the drip tray for cleaning. The appliance will not rinse itself if the appliance is still warm when switched on or if no beverage was dispensed before it was switched off.

Dispensing beverages
Find out how to prepare a drink of your choice.
WARNING: Risk of scalding!
Freshly prepared drinks are very hot

Leave drinks to cool down if ne-cessary.
Do not let escaping liquids or steam come into contact with your skin.

Notes

With a number of settings your coffee is prepared in several steps. Wait until the process is fully com-pleted.
If you are dispensing a beveragewith milk, always connect the milkcontainer filled with milk or themilk adapter to a milk carton.
You can only connect the milk con-tainer or milk adapter if the milksystem is fitted with the adapterand the hose in the beverage out-let cover.
The milk container is specially de-signed for this appliance. Only usethe milk container for storing milkin the refrigerator and in thehouse.
If the milk system has not beencleaned, small amounts of milkmay escape when hot water is dis-pensed.

DoubleShot and tripleShot

Your appliance grinds the coffee twoor three times.
To ensure that only pleasant-tastingand easily digestible aromatic sub-stances are released, coffee beansare freshly ground and brewed againby the appliance.
The longer coffee brews, the more bitter substances and undesirable aromas are released. These bitter substances and undesirable aromas affect the taste and digestibility of coffee.

Note : The functions “doubleShot” and “tripleShot” depend on the beverage strength and beverage size selected.
Slow Brew and Cold Brew
Slow Brew and Cold Brew are slowly brewed beverages that your appli-ance dispenses in a pulsating bever-age flow that is not continuous. This type of coffee preparation exists as a hot and a cold version. Dispensing of the beverage takes several minutes.
Note : Fill the water tank with fresh, cold, non-carbonated drinking water before dispensing drinks.
Dispensing a coffee beverage with milk

An example explains how to make a latte macchiato.
WARNING: Risk of burns!
The milk system can become ex-tremely hot.

Never touch the milk system when it is hot.
Allow the hot milk system to cool down before touching it.

Requirements

The milk container or milk adapter is connected.
The milk container is filled with milk or the milk adapter hose is immersed in milk.

Place a glass underneath the beverage outlet.
Press “Classic”.
Select and press the beverage symbol for latte macchiato.
- To change the strength, press
- To change the per-cup quantity, press ⁠.
- To change the milk ratio, press
Press “Start” and wait until the process is complete.
To completely stop dispensing the beverage, press “Stop”.
To only stop the current dis- pensing step, press “Skip”. After preparing the beverage, the milk system will automatically clean itself with a short jet of steam.

Notes

If you do not change any settings for approx. 30 seconds, the appli-ance will exit settings mode.
The appliance saves the settings automatically.

Tips

You can also pre-heat cups before dispensing using hot water or the cup heater1.
You can also use plant-based al- ternatives to milk, e.g. soya milk. ¡ The quality of the milk froth depends on the type of milk or plant-based alternative used.

Dispensing two cups at once

Depending on your beverage, you can make 2 cups at the same time.
Note : If the “doubleShot” or “tripleShot” function is active, the function for dispensing two cups at once is not possible.

Press the symbol for your desired drink.
Press ⁠.
The display shows the setting
Place two cups on the left and right underneath the beverage out-let.
Press “Start”.
The beverage is prepared in 2 steps. The beans are ground in 2 grinding operations.
The beverage is brewed and then runs into the cups.
Wait until the process is complete.

Grinder

Your appliance has an adjustable grinder, which you can use to cus-tomise the grinding level of your cof-fee beans.
Adjusting the grinding level
Set the desired grinding level while the coffee beans are being ground.
WARNING: Risk of injury!
The grinder rotates.

Never reach into the grinder.

ATTENTION!
Risk of damage to the grinder. The grinder may be damaged if the grind-ing level is not set properly.

Only set the grinding level when the grinder is running.
Select the grinding level using the rotary selector step by step.

Grinding level Setting

The grinding level setting only takes effect after the second cup.

Tip : If the coffee is only dispensed drop by drop, set a coarser grinding level. If the coffee is too thin with too little crema, set a finer grinding level.

Childproof lock

You can lock the appliance, to protect children against scalding and burns.
Activating the child-proof lock

Requirement : The appliance is switched on.

Press and hold ****for at least 3 seconds.
- The childproof lock is activated.

Deactivating the child-proof lock

Press and hold ****for at least 3 seconds.
The childproof lock is deactivated.

Cup heater

You can use the cup heater to pre-heat your cups.
Activating and deactivating the cup heater1

WARNING: Risk of burns!
The cup heater1 can become very hot.

Never touch the cup heater1 while hot.
Allow the hot cup heater1 to cool down before touching it.

Tip : Place the cups with their base on the cup heater to warm them to optimum effect1.

Favourites

Save beverages with your settings as a favourite. You can mark your favourites with a colour. A favourite is a beverage with personal settings. You can change the settings at any time.
Note : To exit the settings, press or start dispensing the beverage.
Saving beverages from the beverage selection

Select a beverage from “Classic” or “coffeeWorld”.
Select the personal beverage set-tings.
Press “Favourite”.
Select the required colour for the beverage.
Press “Save”.

Saving the beverage in the menu

Press “Favourites”.
Press ⁠.
The display shows all available beverages.
Select the required beverage.
Select the personal beverage set-tings.
Press “Next”.
Select the required colour for the beverage.
Press “Save”.

Changing beverage set-the menu

Press “Favourites”.
Select the beverage and press briefly.
Change the beverage settings.
Press “Apply”.
The new settings are saved.

Deleting favourites

Press “Favourites”.
Select the beverage.
Press the beverage for at least 3 seconds.
Confirm “Delete”.

Sorting favourites

Press “Settings”.
Press “Personalisation”.
Press “Sort favourites”.
Sort favourites, e.g. by name or colour.

Home Connect

This appliance is network-capable. Connecting your appliance to a mo-bile device lets you control its func-tions via the Home Connect app, ad-just its basic settings and monitor its operating status. The Home Connect services are not available in every country. The avail-ability of the Home Connect function depends on the availability of Home Connect services in your coun-try. You can find information about this at: www.home-connect.com. To be able to use Home Connect, you must first set up the connection to the WLAN home network (Wi-Fi1) and to the Home Connect app. The Home Connect app guides you through the entire login process. Fol-low the instructions in the Home Con-nect app to configure the settings.
Tip : Please also follow the instruc-tions in the Home Connect app.
Notes

Please note the safety precautions in this instruction manual and make sure that they are also ob-served when operating the appli-ance via the Home Connect app.
Operating the appliance on the ap- pliance itself always takes priority. During this time it is not possible to operate the appliance using the Home Connect app.

Setting up the Home Connect app

Install the Home Connect app on your mobile device.
Start the Home Connect app and set up access for Home Connect.
The Home Connect app guides you through the entire login pro-cess.

Setting up Home Connect

Requirements

The Home Connect app has been installed on your mobile device.
The appliance is receiving signals from the WLAN home network (Wi-Fi) at its installation location.

Open the Home Connect app and scan the following QR code.
Follow the instructions in the Home Connect app.

Home Connect settings
Adapt Home Connect to your needs. You can find the Home Connect set-tings in the basic settings for your ap-pliance. Which settings the display shows will depend on whether Home Connect has been set up and whether the appliance is connected to your home network.

Overview of the Home Connect settings
You can find an overview of the Home Connect settings and network settings here.

Basic setting	Selection	Description
WiFi connection	On Off	Switch off the wireless module during long absences

or to save energy.

Note: In networked standby mode

your appliance requires max. 2 W.

Remote start| On Off| Switch remote start on the appliance on and off.

Note: With the Home Connect app

only switch-off is possible.

Add mobile

device

| –| Connect the appliance to the “Home

Connect” app or additional accounts.

Network informa-

tion

| –| Display network information and appli-

ance information.

Delete network settings| –| Note: You cannot operate your appli- ance via the “Home Connect” app

without a network connection.

Remote diagnostics
Customer Service can use Remote Diagnostics to access your appliance if you contact them, have your appli-ance connected to the Home Con-nect server and if Remote Dia-gnostics is available in the country in which you are using the appliance.
Tip : For further information and de-tails about the availability of Remote Diagnostics in your country, please visit the service/support section of your local website: www.home-con-nect.com.
Data protection
Please see the information on data protection. The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration):

Unique appliance identification (consisting of appliance codes as well as the MAC address of the Wi-Fi communication module in-stalled)..
Security certificate of the Wi-Fi communication module (to ensure a secure data connection).
The current software and hardware version of your appliance.
Status of any previous reset to factory settings.

This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time.
Note : Please note that the
Home Connect functions can only be utilised with the Home Connect app. Information on data protection can be retrieved in the Home Connect app.

Basic settings

You can configure the basic settings for your appliance to meet your needs and call up additional func-tions.
Changing the basic settings

Press ****⁠.
The display shows the list of basic settings.
Change the required basic setting.
The appliance saves the basic setting automatically.
To exit the basic settings, press

Overview of the basic settings
You can find an overview of the basic settings here.

Beverage setting| Brewing temperature| Set the brewing temper-

ature.

---|---|---
1 Depending on the appliance specifications
| Milk sequence| Select the sequence for
---|---|---
| | milk and coffee.
| Latte macchiato pause| Select the pause
| | between milk and coffee.
| Resetting beverage para-| Reset the beverage set-
| meters| tings.
Appliance setting| Cup heater1| Switch the cup heater1
| | on or off.
| Automatic switch-off| Set the time after which
| | the appliance switches
| | off.
| Display brightness| Set the brightness in
| | steps.
| Sounds| ¢ Switch sounds on and

off.

Cleaning and servicing

To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
Dishwasher-safe components
Here you can find an overview of the components you can clean in the dish- washer.

ATTENTION!
Some components are sensitive to heat and may be damaged if they are cleaned in a dishwasher.

Follow the operating instructions of the dishwasher.
Only clean dishwasher-safe com-ponents in the dishwasher.
Only use programmes that do not heat the components above 60 °C.
Suitable:
- Drip tray
- Drip plate
- Coffee dregs container
- Mechanical fill level indicator
- Milk system with adapter ¡ Milk container with lid
Not suitable:
- Water tank
- Water tank lid
- Brewing unit
- Beverage dispenser cover

Cleaning agent
Only use suitable cleaning agents.
ATTENTION!
Unsuitable cleaning products may damage the surfaces of the appli-ance.

Do not use harsh or abrasive de-tergents.
Do not use cleaning agents con-taining alcohol or spirits.
Do not use hard scouring pads or cleaning sponges. Unsuitable cleaning and descaling agents may damage the appliance.
Do not use pure citric acid, vinegar or any vinegar-based agents to de-scale the appliance.
Do not use descaling agent with phosphoric acid.
Only use cleaning tablets and de-scaling tablets that have been spe-cially developed for the appliance.

Tips

Wash new sponge cloths thoroughly to remove any salt adher-ing to them. Salt can cause rust film to develop on stainless steel surfaces.
Always remove any residues of limescale, coffee, milk and clean-ing/descaling solutions immedi-ately to prevent corrosion.

Cleaning the appliance

WARNING: Risk of electric shock!
An ingress of moisture can cause an electric shock.

Never immerse the appliance or the power cord in water.
Liquids must not be spilled on the appliance plug connection.
Do not use steam- or high-pres-sure cleaners to clean the appli-ance.

WARNING: Risk of burns!
Some parts of the appliance become very hot.

Never touch hot appliance parts.
After use, allow hot appliance parts to cool down before touch-ing.

Clean the housing, the high-gloss surfaces and the control panel with a microfibre cloth.
Clean the outlet system with a soft, damp cloth after beverages have been dispensed.
Rinse the water tank with fresh, clean water.
If the appliance has not been used for a long time, e.g. after a holiday, clean the entire appliance, includ-ing moving parts such as the brew-ing unit or water tank.

Note : The appliance will rinse itself automatically if you switch it on when it is cold or switch it off after it has dispensed coffee. The system is therefore self-cleaning.
Cleaning the drip tray and coffee dregs con-tainer

Clean and empty the drip tray and coffee dregs container every day to prevent deposits.

Pull the drip tray and the coffee dregs container forwards and out. ‒ Insert the coffee dregs container in the drip tray and put the drip plate on top.
Fig. 25
Clean and dry all parts.
Insert the coffee dregs container in the drip tray and put the drip plate on top.
Insert the drip tray with the cof- fee dregs container in the appli-ance.
Fig. 26

Cleaning the milk container

Clean the milk container regularly for hygiene reasons. You can clean the milk container in the dishwasher. Fol-low the illustrated instructions at the beginning of this manual.

Fig. 17 – 18

Service programmes
Use the service programmes if you insert or remove a water filter or in order to clean your appliance thor-oughly. Your appliance will tell you when you need to perform a service programme, e.g. cleaning.
ATTENTION!
Improper cleaning and descaling or a delay in doing so may damage the appliance.

Immediately perform the descaling process in accordance with the in-structions.
Only use cleaning tablets in the tablet compartment.
Do not put descaling tablets or other products in the tablet com-partment.

Notes

The display indicates the progress of the descaling or cleaning pro- cess.
If your appliance has been locked, you can only operate it again once the descaling process has been carried out.

Tip : In addition to the automatic rins-ing process, regularly also remove and clean the brewing unit.
Using the service programmes

Press ⁠.
Press the symbol for the required programme.
The display will guide you through the programme

Overview of service programmes
You can find an overview of the service programmes here.
Note : The start image shows the remaining number of beverages that can be dispensed until running the programme and the duration.

Tips

If you are starting the “Descaling” or “calc’nClean” programme, keep a container with a capacity of min. 1 l at the ready.
If you use a water filter, this will prolong the time until you have to run a service programme.
You can combine “Descaling” and “Cleaning” with the “calc’nClean” service programme.

Troubleshooting

You can rectify minor faults on your appliance yourself. Read the troubleshoot-ing information before contacting after-sales service. This will avoid unneces-sary costs.
WARNING : Risk of electric shock!
Improper repairs are dangerous.

Repairs to the appliance should only be carried out by trained specialist staff.
Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk.

Transportation, storage and disposal

Activating frost protection

Protect your appliance from frost dur-ing transport and storage.
ATTENTION!
Residues of liquid in the appliance may damage it during transport or storage.

Empty the pipe system before transport or storage.

Run the “Frost protection” pro-gramme.
Disconnect the appliance from the power supply.

Disposing of old appliance

Valuable raw materials can be re-used by recycling.

Unplug the appliance from the mains.
Cut through the power cord.
Dispose of the appliance in an en-vironmentally friendly manner. Information about current disposal methods are available from your specialist dealer or local authority.

This appliance is la-belled in accordance with European Directive 2012/19/EU concerning used electrical and elec-tronic appliances (waste electrical and electronic equipment – WEEE). The guideline determ-ines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Service

Function-relevant genuine spare parts according to the corresponding Eco- design Order can be obtained from Customer Service for a period of at least 7 years from the date on which your appliance was placed on the market within the European Eco-nomic Area.

Note : Under the terms of the manu-facturer’s warranty the use of Cus- tomer Service is free of charge. Detailed information on the warranty period and terms of warranty in your country is available from our after-sales service, your retailer or on our website. If you contact Customer Service, you will require the product number (E-Nr.), the production number (FD) and the consecutive numbering (Z-Nr.) of your appliance. The contact details for Customer Ser-vice can be found in the enclosed Customer Service directory or on our website.
Product number (E-Nr.), production number (FD) and consecutive num-bering (Z-Nr.)

You can find the product number (E-Nr.), the production number (FD) and the consecutive numbering (Z-Nr.) on the appliance’s rating plate.
Make a note of your appliance’s de-tails and the Customer Service tele-phone number to find them again quickly.

Technical specifications

Voltage 220– 240 V ∼
Frequency 50 Hz
Connection rating 1500 W
Maximum static pump pressure 20 bar
Maximum capacity of water tank (without filter) 2,6 l
Maximum capacity of bean container 350 g
Length of the power cable 100 cm
Appliance height 38 cm
Appliance width 30 cm
Appliance depth 46,7 cm
Weight, empty 9 kg
Type of grinder Ceramic

This product contains light sources from energy efficiency classes D and F. These light sources are available as spare parts and may only be replaced by trained specialist staff.
Information regarding Free and Open Source
Software
This product includes software components that are licensed by the copyright holders as free or open source software. The applicable licence information is stored on your home appliance. You can also access the applicable licence information via your Home Connect app: “Profile -> Legal information -> Licence Information”.1 You can download the licence information on the brand product website. (Please search on the product website for your appliance model and additional documents). Alternatively, you can request the relevant information from ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str. 34, 81739 Munich, Germany. The source code will be made available to you on request. Please send your request to ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str.34, 81739 Munich, Germany. Subject: „OSSREQUEST“ The cost of performing your request will be charged to you. This offer is valid for three years from the date of purchase or at least as long as we offer support and spare parts for the relevant appliance.

Declaration of Conformity
Declaration of ConformityBSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the essential requirements and other relevant provisions of Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at siemens-home.bsh- group.com among the additional documents on the product page for your appliance. Hereby, BSH Hausgeräte GmbH declares that the appliance with Home Connect functionality is in compliance with relevant statutory requirements.1 A detailed Declaration of Conformity can be found online at siemenshome.bsh-group.com/uk/ among the additional documents on the product page for your appliance.1

2.4 GHz band (2400–2483.5 MHz ): Max. 100 mW
5 GHz band (5150–5350 MHz + 5470–5725 MHz): max. 200 mW

BE	BG	CZ	DK	DE	EE	IE	EL	ES
FR	HR	IT	CY	LI	LV	LT	LU	HU
MT	NL	AT	PL	PT	RO	SI	SK	FI
SE	NO	CH	TR	IS	UK (NI)
5 GHz WLAN (Wi-Fi): For indoor use only.	AL

BA

MD

ME

MK

RS

UK

UA

| 5 GHz WLAN (Wi-Fi):| For indoor use only.| –

ENManufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG

Valid within Great Britain : Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY siemens-home.bsh-group.com

FAQ’s

Q: How do I activate the child lock feature?
A: To activate the child lock, navigate to the settings menu on the touch display and follow the on-screen instructions.

Q: Can I adjust the grind size of the coffee beans?
A: Yes, you can adjust the grind size by accessing the grinder settings on the touch display and selecting your preferred level.

Q: What should I do if there is a warning about low water levels?
A: Refill the water tank with fresh water to ensure uninterrupted operation of the machine.