A-iPOWER SUA3800iED Dual Fuel Generator User Guide

A-iPOWER SUA3800iED Dual Fuel Generator User Guide

Unpack Generator: Remove generator, accessories, inserts and Literature

from carton. If any item is missing or damaged, contact our product service department
at 1-855-888-3598

This Quick Reference Guide is not substitute for reading the operator’s manual. To reduce the risk of injury or death, user must read and
underdstand the operator’s manual before using this product. All pages references to the operator’s manual.

1. Battery Connection and Adding Lubricant and Fuel

Use a funnel to pour provided engine oil into engine. Fill to the upper mark of the oil dipstick H.
Use clean / fresh regular UNLEADED gasoline with a minimum 87 octane.
Connect the battery and generator with a quick connect cable.

2. Start Generator

Move generator outside to a flat, level surface, away from doors, windows and vents.

Do not overload generator or electrical cords. Consult operation manual.

Select the Fuel Source (Gasoline)

1. Make certain the propane tank is fully closed

2. Add gasoline to the fuel tank.

3. Turn the fuel valve knob to the ON position

4. Turn the engine switch to the “ON”(l) position.

5. Turn the engine switch to the “ON”(l) position.

6. Pull recoil starter slowly until resistance is felt, then pull rapidly

6b Turn and hold the ENGINE START/STOP switch for 5 seconds until the engine start.

6 C Turn and hold the REMOTE START switch for 5 seconds until the engine start.

Select the Fuel Source (Propane/LPG)

1. Turn the fuel valve knob to the OFF position

2. Connect the LPG gas hose to the propane fuel source.

3. Fully open the Propane/LPG cylinder knob.

4. Turn the fuel source switch to the LPG position.

5. Turn the engine switch to the “ON”(l) position.

6. a Pull recoil starter slowly until resistance is felt, then pull rapidly.

6b Turn and hold the ENGINE START/STOP switch for 5 seconds until the engine start.

6c Turn and hold the REMOTE START switch for 5 seconds until the engine start.

3. Shutdown and Storage

1. Remove any load from the generator.

2. Electric start operation Push and hold the START/STOP button for one second.

3. Remote start operation Push STOP on the remote start key fob for one second.

4. Recoil Start operation Turn the engine switch to the “OFF(O)” position.

5. Turn the propane/LPG cylinder knob to close position.

6. Turn the fuel valve knob to the OFF position

If generator is to be stored for longer than 30 days, refer to The

operator’s manual for further Instruction.

4. Changing Fuels

1. Disconnect all electrical loads from the generator.

2. Turn the engine switch to the “OFF”(O) position.

3. Turn the fuel switch to the “OFF” position.

4. Fully open the Propane/LPG cylinder knob.

5. Turn the fuel source switch to the LPG position.

6. Make certain the propane tank is fully closed.

7. Turn the fuel source switch to the gasoline position.

8. Turn the fuel source switch to the gasoline position.

Start the engine (generator).

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>