PPE Heavy-Duty DEEP Aluminum Transmission Pan Installation Guide
- June 8, 2024
- PPE
Table of Contents
Heavy-Duty DEEP Aluminum Transmission Pan
Installation Guide
Heavy-Duty Deep Cast Aluminum
Transmission Pan
(228051000, 228051010, 228051020)
Installation Guide
DISCLAIMER OF LIABILITY
Performance products can increase horsepower above and beyond factory
specifications.
Additional horsepower creates more stress on the drive-train components, which
could result in drive-train failure.
Note regarding emissions-related, non-E.O.-legal products: THESE PRODUCTS ARE
LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES THAT MAY NEVER BE USED, OR
REGISTERED OR LICENSED FOR HIGHWAY OR OFF-ROAD USE.
This agreement sets forth the terms and conditions for the use of PPE
products. The installation of this product indicates that the Buyer has read
and understands this agreement and accepts the terms and conditions. PPE
(Pacific Performance Engineering) Inc., its distributors, employees, and
dealers (the “Seller”) shall not be responsible for the product’s proper use
and service. The buyer hereby waives all liability claims. The Buyer hereby
acknowledges no reliance on the Seller’s skill or judgment to select or
furnish goods suitable for any particular purpose and that there are no
liabilities which extend beyond the description on the face hereof, and the
Buyer hereby waives all remedies or liabilities expressed or implied, arising
by law or otherwise (including without any obligation of the Seller with
respect to fitness, merchantability and consequential damages), or whether or
not occasioned by the Seller’s negligence.
The Seller disclaims any warranty and expressly disclaims any liability for
personal injury or damages. The Buyer acknowledges and agrees that the
disclaimer of any liability for personal injury is a material term for this
agreement and the Buyer agrees to indemnify the Seller and to hold the Seller
harmless from any claim related to the item of equipment purchased. Under no
circumstances will the Seller be liable for any damages or expenses by reason
of use or sale of any such equipment. The Seller assumes no liability
regarding the improper installation or misapplication of its products. It is
the installer’s responsibility to check for proper installation and if in
doubt, contact the manufacturer. The Buyer is solely responsible for all
warranty issues from the manufacturer.
LIMITATION OF WARRANTY
The Seller gives Limited Warranty as to description, quality, merchantability,
and fitness for a particular purpose, productiveness, or any other matter of
Seller’s product sold herewith. The Seller shall not be responsible for the
products proper use and service and the Buyer hereby waives all rights other
than those expressly written herein. This warranty shall not be extended,
altered or varied except by a written instrument signed by Seller and Buyer.
Limited lifetime warranty on all PPE cast aluminum products, and PPE
Transmission Coolers.
Three (3) year limited warranty on PPE Manifolds and Up-Pipes Kits, and OEM-
Length Up-Pipes. One (1) year limited warranty on all other PPE products from
the date of sale to original buyer and limited solely to the parts contained
within the products kit. All products that are in question of Warranty must be
returned prepaid to the Seller and must be accompanied by a dated proof of
purchase receipt. All Warranty claims are subject to approval by Seller. Under
no circumstances will the Seller be liable for any labor charged or travel
time incurred in diagnosis for defects, removal, or re-installation – of this
product or any other contingent expenses. Under no circumstances will the
Seller be liable for any damage or expenses incurred by reason of the use or
sale of any such equipment. In the event that the buyer does not agree with
this agreement: the buyer may promptly return this product, in a new and
unused condition in its original packaging, with a dated proof of purchase to
the place of purchase within ten (10) days from date of purchase for a full
refund. The installation of this product indicates that the buyer has read and
understands this agreement and accepts its terms and conditions.
CAUTION:
The PPE Transmission Pan is designed to fit the factory Dodge transmissions
(supplied as original equipment). However, in some applications, or because of
the use of certain factory options and / or after equipment, there may be
clearance problems between your PPE Transmission Pan and other vehicle
components. It is the responsibility
of the vehicle owner and installer to ensure that there is no contact between
the pan and other moving or fixed vehicle components. Contact with any vehicle
component or the modifying of the PPE Transmission Pan voids the pan warranty.
PPE assumes no liability, expressed or implied, for damage or injury to
persons or property.
KIT PARTS:
1- Transmission Pan
1- Gasket
1- Filter Spacer Block
1- 1/8” Pipe Plug (installed)
1- 1/4” Pipe Plug (installed)
1- Magnetic Drain Plug (installed) – torque 17 ft. lbs.
14- Allen Bolts – torque 15-19 ft. lbs.
1- Installation Guide
TOOLS AND PARTS NEEDED:
Torque Wrench
1/4” Ratchet
1/4” Extension
1/4” Drive
1/4” inch Allen Socket
TORX #25
17mm Socket for Service/ Draining
Oil Drain Pan
Shop Towels
Gloves
Eye Protection
Step 1: Allow engine to cool. Drain cool oil from installed pan. Remove
the 14 bolts holding the pan in place.
Step 2: Remove pan and clean gasket surface for reassembly in Step 7.
Step 3: Remove filter set screws.
Step 4: Remove filter from the transmission.
Step 5: Install the filter spacer block and a new filter. Step 6:
Prepare hardware.
Step 7: Place new gasket on pan.
Step 8: Place 1 bolt thru gasket and pan to hold it in place
when installing.
Step 9: Use a 1/4” Allen wrench for this step.
Insert screws thru the trans pan into the transmission following the sequence
listed below.
Torque Allen bolts to 15-18 ft. lbs.
Step 10: Fill with fluid. Start engine. Check for leaks.
PACIFIC PERFORMANCE ENGINEERING
PPEpower.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>