Kimwood HiFi Stereo 3.5mm Wired Earbuds User Manual
- June 6, 2024
- Kimwood
Table of Contents
HiFi Stereo 3.5mm Wired Earbuds
User Manual
- Thank you for purchasing Kimwood 3.5mm wired earbuds.
- Please read the instruction manual carefully and use it correctly.
Package Included
Please Confirm First
After receiving the product, please confirm whether the package content is
complete. If something is missing, please contact us.
Package Content
- 3.5mm Wired Earbuds……………………1
- User Manual……………………1
- Storage Bag……………………1
How To Use
Main Button
Microphone/Volume Button
Wide Compatibility
Fit for iPhone, iPad, iPod, Android Smartphones, Tablets, Computers, Laptop, MP3/MP4, PS4, Switch, XBOX ONE, and all devices with 3.5mm headphone jack.
For Mobile Phone:
If your device does not have a 3.5mm headphone jack, you need an adapter to
use it. (Some mobile phones only have a Lightning jack or USB C jack)
NOTICE:
-
Our earphone is a 4-pole plug with a 3.5mm headset + microphone. If the headphone jack on the computer side is an integrated headphone + microphone single interface, the microphone can be used normally.
(Almost all laptops have a single headphone jack, which is a 4-pole interface, the microphone can be used normally.) -
Some computer headsets and microphones are two separate interfaces, so you need to connect with an adapter to use the microphone function.
one 3.5mm Female to dual 3.5mm Male connectors (Headphone & Microphone)
Kenwood Contact Information
If for any reason there you were not satisfied or have an issue, please do not
hesitate ta contact us via the information provided below, we will give you
the most satisfactory solution.
Furthermore, I hope you are truly loving our products and are happy with your
purchase. As a small seller on Amazon, we are largely dependent on product
experience sharing from wonderful customers such as yourself.
If our product has met or exceeded your expectations, we’d appreciate it if
you could take a few seconds to help us spread the word about our product( )
Every good sharing is encouragement and recognition for our work. Your few
seconds will be a great encouragement to our little shop. We will continue to
refuel, attach great importance to product quality control, and provide
customers with better services.
In this process, we need your support very much. We would be deeply grateful
if you could help us, we will do better Highly appreciate your support!
Warranty and After-sales Service
The warranty period is 18 months from the date of purchase.
We make every effort to ensure the quality of our products, but if the product
is damaged or defective, please contact us via email. We will reply to you
shortly, regarding the exchange procedure for your item.
Email:support@iskeyteam.com
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.