anko 43173860 Bluetooth Soundbar User Manual

Bluetooth® Soundbar
User Manual

Package Contents

• 24W Soundbar
• Remote Control
• Power Adapter
• 3.5mm to 3.5mm Aux in Cable
• 2x Foot Pads
• User Manual

43-173-860

Specifications

Adaptor:

• Brand: Togeinn
• Model, TY1800133/1mn
• Input: 100-240V-, 50/60Hz, 0.8A
• Output: DC18V,1.33A
• Work temperature: -10-+45C

Soundbar:

• Power Supply: DC 18V/1.33A
• Output Power: 24W @<10% THD
• Channel 2.0CH
• Speaker Size & Number of Speakers: 2.0″x2
• Working environment (Temperature): -10-+45C
• Relative Humidity: 5%-90%
• Frequency Response: 90Hz-20KHz
• Bluetooth Version V5.0
• Bluetooth Distance: Approx 10M
• Dimension: L80.78W6.5xH6.5cm

Controls And Functions

Side View/Control Buttons

1. –Power ON/OFF
2. –Mode
3. — Next (short press)/ VOL+ (long press)
4. –Prev (short press)/VOL- (long press)
5. — DC Power Input
6. –Arc-in input
7. -Aux-in input

Back View

Mode Indicator Lights

Remote Control

Instructions Guide

Connecting to the Mains Supply

• Ensure that the power supply voltage is in the voltage of 100V-240V.
• Please use provided adaptor to ensure unit can work properly.
• Connecting the unit to any other power source may cause damage to the unit.
• Unwind the mains cable to its full length Connect the mains plug to a mains socket.
• Make sure the mains plug is fully inserted into the mains socket.
• Connect the adopter to the unit via the DC input Socket.

Ensure all audio connections of the unit are connected before connecting to the mains power socket.
Unplug the power cord from the outlet when the unit is not in use for an extended period of time.

Using the ARC Input

• You will need. An audio source with an ARC Audio Output and a ARC Audio cable (not included)
• Connect the ARC Audio cable to the ARC output on the audio source ond to the ARC Input an the soundbar
• Press the POWER button on the soundbar or POWER button directly on the remote control (Rem.10) to switch on the unit.
• Press the MODE button on the remote control (Rem.18) to switch to ARC mode or select the Mode button on main unit repeatedly to select the RC mode.
• Using the native controls on gour connected device, make sure the audio settings are set to ARC or HDMI Audio and are turned on. Audio from the connected audio source will now be played through the speakers.
• If you are using this device with a TV for the first time and there is no sound output, you mag have the incorrect audio setting assigned on your TV. Please check gour TV audio output setting is set to PCM/2-CH.

Using the Bluetooth Operation

• Pairing a Bluetooth Device for the First Time
• Press the POWER button on the unit or the POWER button on the remote control (Rem.10) to switch on the unit.
• Select and press the MODE button repeatedly on the remote control until in Bluetooth mode (Rem.18) or press the Mode button repeatedly on the soundbar to enter Bluetooth mode.
• Using the native controls on your Bluetooth device, select the KM43173860 in your Bluetooth settings to pair.
• Refer to the user manual for gour specific device for instructions on pairing and connect­ ing Bluetooth devices.
• When successfully paired and connected. a prompt tone will issue from the unit. After initial pairing, the unit will stag paired unless unpaired manually by the user
• lf your device should become unpaired or gou find it is unable to connect, repeat the above steps.

Playing Audio Wirelessly

• Follow the instructions for pairing a Bluetooth device
• Use the native controls on the connected Bluetooth Device to select a track
• To Play/Pause the track or Skip Forwards/Backwards to a selected track. use the remote control (Rem.12,13,19)
• Audio played through the connected Bluetooth device will now be heard through the speakers.

Using the AUX IN Cable

• Plug one end of a 3 5mm to 3.5mm
• Line In cable (included) into the Line In port on the unit.
• Plug the other end of the cable into the audio output/headphone output on an MP3 player or other audio source.
• Press the Power button on the soundbar or POWER button directly on the remote control (Rem.10) to switch on the unit.
• Press the Mode button repeatedly on the soundbar or press the MODE button on remote control (Rem.18) repeatedly to enter AUX in mode.
• Audio played through the connected device will now be heard through the speakers.

Trouble shooting

If the soundbar does not work properly as desired, please check the following.

wall.
Check whether the power adaptor is properly connected to power outlet or not.
No sound| Check whether cables are properly installed. If they are, please try alternative cable to connect to your TV if possible.
Check unit is out of standby and in mode.
No sound from bluetooth connection| Forget the soundbar from your device and reconnect.
Function disturbance| Switch off and unplug the unit. Leave it for 2 minutes and switch it on again.
If a particular mode is causing problems, please try an alternative connection to your TV such as Optical or Bluetooth.
Remote control does not work [properly]| Check whether the battery has run out or not. Replace with a new one if necessary.
Check whether there is obstacle on the front of remote sensor.

Quick System Installation Guide

Make the holes with the corresponding drill bit according to the type of wall, set 2pcs plastic dowel and screw (BA 425mm, cap: 8mm) into the hole (dowel and screw not included)
It is advisable to leave 4mm-5mm between the head of the screw and the wall to minimize the inclination angle of the soundbar.

For a better sound experience, it is advisable to place the soundbar at the same height of the ear.

Paste the foot pad on both side under the sound bar and ensure foot pad paste firmly.
Place on the TV bench to use.

Safety Information

1. Read the user monuol.
2. Keep the user manual.
3. Heed oll Warnings.
4. Follow all instructions.
5. Do not clean the apparatus near or with water.
6. Do not block any ventilation openings. Install in accordance with the manufacturer’sin­ structions.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
8. Protect the power from being walked on or pinched particularly at plugs, convenience receptacles. ond the point where they exit from the apparatus
9. Only use attachments/accessories specified by the manufacturer.
10. Unplug this apparatus during light storms or when unused for long periods of time.
11. Refer all servicing to qualified service personnel. Servicing is required when the appara­ tus has been damaged in a wag. such as power -supplg cord or plug is damaged, liquid has been spilled or objects hove fallen into the opporotus, the opporotus hos been exposed to the rain or moisture, does not operate normally or has been dropped.
12. No naked flame sources. such as lit candles. should be placed on the apparatus.
13. Dispose of used electrical products and batteries safely according to gour local authority and regulations.

ADDITIONAL WARNINGS
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be placed on the opporotus. Main plug is used to disconnect device and it should remain readily operable during intended use. In order to discon­ nect the apparatus from the mains completely, the mains plug should be disconnected from the main socket outlet completely. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
IMPORTANT: Please read all instructions carefully before use and keep for future eference.
Risk of electric shock. Do not open
  Read all instructions carefully before use and keep for future reference.
When servicing. use only identical replacement parts.
12 month warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with the accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.
Kmart will provide gou with gour choice of a refund, repair or exchange (where possible) for this product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of claiming the warranty. This warranty will no longer opplg where the defect is a result of alteration, accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer Help at kmart.com.au for any difficulties with your product. Warranty claims and claims for expense incurred in returning this product can be addressed to our Customer Service Centre at 690 Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of occeptoble quality and the failure does not amount to a major failure For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation
WARNING » Do not dispose of unit in fire or water. » Never attempt to disassemble and reassemble Waste electrical products should not be disposed of with household waste, please recycle where facilities exist. Check with your local authority for recycle advice.» Keep our device and all accessories out of reoch of children and animals. Smoll ports moy couse choking or serious injury if swallowed. » Avoid exposing your device to very cold or very hot temperatures (below -10C or above 45C) » Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device. » Do not allow gour device to get wet, liquids can cause serious damage. Do not handle your device with wet hands.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>