JBL Vibe Flex Wireless Black Earbuds User Guide
- June 8, 2024
- JBL
Table of Contents
WHAT’S IN THE BOX
https://register.jbl.com.utm_medium=US&utm_source=QSG
APP
JBL Headphones
https://storage.lscloud.harman.com/Testing/MyJBLHeadphones/QRCodeDownload/appstore/jblheadphone.html
How to wear
FIRST TIME USE
POWER ON & CONNECT
DUAL CONNECT
CONTROLS
VOICEAWARE
power off
MANUAL SETUP
DO MORE WITH THE APP
CHARGING
LED BEHAVIORS
TECH SPEC
| Model: | VIBE FLEX | Impedance: | 16 ohm |
|---|---|---|---|
| Driver size: | 12 mm/ 0.472” Dynamic Driver | Sensitivity: | 105 dB SPL@1 kHz |
| Power supply: | 5 V 1 A | Maximum SPL: | 95 dB |
| Earbud: | 3.8 g per pc (7.6 g combined)/ | ||
| 0.00838 lbs per pc (0.01676 lbs combined) | Microphone sensitivityBluetooth | ||
| version: | -38 dBV/Pa@1 kHz | ||
| Charging case: | 35.1 g/ 0.07738 lbs | Bluetooth profile version: | 5.2 |
| Earbud battery type: Charging case | Lithium-ion polymer (40 mAh/ 3.85 V) | ||
| Bluetooth transmitter frequency range: | A2DP V1.3, AVRCP V1.6, HFP V1.7 | ||
| Charging time: | Lithium-ion polymer (500 mAh/ 3.8 V) | Bluetooth transmitter | |
| power: | 2.4 GHz – 2.4835 GHz | ||
| Music playtime with BT on: | <2 hrs from empty | Bluetooth transmitter | |
| modulation: | <13 dBm | ||
| Talk time: | 8 hrs | Maximum operation temperature: | GFSK, π/4-DQPSK, 8DPSK |
| Frequency response: | 4.5 hrs | 20 Hz – 20 kHz | 45 °C |
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-JBLVFLEX) has also been tested against this SAR limit
According to this standard, the highest SAR value reported during product
certification for head use is 0.7068W/kg.
The device was tested for typical bodily operations where the product was kept
0 mm from the head. To maintain compliance with IC RF exposure requirements,
use accessories that maintain a separation distance of 0mm between the user’s
head and the back of the headset. The use of belt clips, holsters and similar
accessories shall not contain metal parts in its assembly. Use of accessories
that do not meet these requirements may not comply with IC RF exposure
requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0cm
must be maintained between the user’s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
IC: 6132A-JBLVFLEX
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by HARMAN International
Industries, Incorporated is under license. Other trademarks and trade names
are those of their respective owners.
WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT
CIRCUIT |MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO
THE INSTRUCTIONS
HP_JBL_VIBE FLEX_QSG_US+EMEA_SOP_V7
Documents / Resources
| JBL
Vibe Flex Wireless Black
Earbuds
[pdf] User Guide
Vibe Flex, Wireless Black Earbuds, Black Earbuds, Wireless Earbuds, Earbuds
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>