JUSAKA Mini PC-DK08 Intel Mini PC User Guide
- June 6, 2024
- JUSAKA
Table of Contents
JUSAKA Mini PC-DK08 Intel Mini PC User Guide
Hey, my friend,
thanks for choosing JUSAKA, please read carefully including the
packing list, operating instructions and other precautions. Hope to
bring you an unprecedented fun and experience.
After-sales service
Facebook: @jusakapc
Instagram: jusaka.pc
Email: info@jusakapc.com
Packing List
When receiving the mini pc,please open the package and carefully remove the product,if there is any omission or damage,please contact the supplies immediately.
- Mini pc *1
- HDMI*1
- Manual * 1
- Power adapter *1
Not all power plugs are included in the box before opening or servicing the equipment,disconnect the connected power adapter, telecommunications system, network, and modem.
Product Overview
Front view from left to right
- Power button*1
- Earphone Jack*1
- USB 3.0*4
- USB Type-C*1
- Microphone*1
- SD Card*1
Behind view form left to right
- Power connector *1
- Netwrok*2
- USB2.0 *4
- 1x GbE RJ45 Intel i219
- HDMI *2
- 1 x GbE RU45 Realtek 8111
- MINI DP *2
Safety and Caution Information
To make sure a better user experience,please pay a attention to
the following infos :
AC Power Adapter:
Risk of electric shock,fire,or burn if using an AC adapter other than the
one provided with this device. Indoor use only and in dry locations. Device
must only be repaired by a professional. Do not open enclosure.
A Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations.
Failure to use the included power adapter shall violate regulatory compliance requirements and may expose the user to safety hazards.
Temperature:
This device is intended for use in ambient temperatures between -20°C and 60°C
(-4°F and 140°F). Avoid using or storing next to heat sources, indirect
sunlight, or outside the intended temperature ranges.
A Modify:
Modification of the wireless solution, thermal solution, device components or
enclosure shall violate regulatory compliance requirements and may
inducesafety hazards.
A Disconnect the attached power cord before you open or service the device.
The power supply cord must be plugged into a socket or outlet that is provided with a suitable earth ground.
Using a soft cloth to wipe in stead of use harsh of chemical solvent, cleaning products.
Common problems & measures
-
Unable to start ?
Confirm whether the power is connected correctly; try to press the start button again -
Cannot display at startup ?
Check whether the external display device is properly connected to HDMI OR DP; whether the display device input mode is correct -
A black screen appears?
Check whether the monitor enters sleep mode; check the status of the power indicator to confirm whether the device enters sleep mode -
The device does not respond ?
Long power supply is turned on again;unplug the power plug and turn it on again.
Bios Setting
Press the start button and press the delete button at the same time to enter the product BIO setting interface.
Main Menu
Set the systerm time,date,and view related information,such as BIOS, EC
Version ,CPU , memory ,etc.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>