EPOMAKER EP75 Wired-Wireless Mechanical Keyboard User Guide

June 8, 2024
EPOMAKER

QUICK START GUIDE

EPOMAKER EP75

EPOMAKER EP75 Wired-Wireless Mechanical

75% Hot-Swap Wired/Wireless Mechanical Keyboard

This Quick Guide is an introduction to the use and functionality of the EPOMAKER EP75.
For in-depth guide of functionality of the customization software please refer to the manual that you can find in the official epomaker website at https://epomaker.com/pages/software-downloads

Should you require more assistance please email us at support@epomaker.com

MODEL: EPOMAKER EP75
SIZE: 330 x 138 x 32mm
SYSTEM: Windows / Mac /Linux
CONNECTION: USB-C, 2.4GHz Wireless, Bluetooth 5.0
BUILT-IN BATTERY: 10000mah
CABLE USB VOLTAGE RANGE: 5≤500MAH
WEIGHT: 1160g ± 20g
HOTSWAP: YES
LAYOUT: 75% Layout(82keys)

Made in China

Manufacturer: Shenzhen Changyun Technology Co., Ltd.
Address: Seventh Floor, Kai Daer Building, No.168 Tongsha Road,
Xili Street, Nanshan Disctrict, Shenzhen,Guangdong, CN
Email: support@epomaker.com
Web: www.epomaker.com

APEX CE SPECIALISTS LIMITED
Unit 3d North Point House, North Point Business Park,
New Mallow Road Cork, T23 AT2P, Ireland
Contact: Wells              Tel: +353212066339

APEX CE SPECIALISTS LIMITED
89 Princess Street, Mancheste, M1 4HT, UK
Contact: Wells     E-mail: info@apex-ce.com

EPOMAKER certi 1

WINDOWS SHORTCUTS

FN + ESC Long press 3s to restore the default setting
FN + WIN Lock/Unlock the Windows key
FN + DEL Ins
FN + P Lock/Unlock the Keyboard
FN + F1 Screen Brightness-
FN + F2 Screen Brightness+
FN + F3 Task View
FN + F4 Open browser
FN + F5 Email
FN + F6 My Computer
FN + F7 Last Song
FN + F8 Play/ Pause
FN + F9 Next Song
FN + F10 Mute
FN + F11 VOL-
FN + F12 VOL+

FN + 1 Bluetooth Device 1
FN + 2 Bluetooth Device 2
FN + 3 Bluetooth Device 3
FN + 4 2.4GHz Wireless
FN + 5 Wired

MACOS SHORTCUTS

FN + ESC Long press 3s to restore the default setting
FN + ESC Lock/Unlock the FN key (Short Press)
FN + DEL Ins
FN + P Lock/Unlock the Keyboard
FN + F1 Screen Brightness
FN + F2 Screen Brightness+
FN + F3 Screenshot
FN + F4 Task Control
FN + F5 Mute
FN + F6 VOL-
FN + F7 VOL+
FN + F8 Last Song
FN + F9 Play/ Pause
FN + F10 Next Song
FN + F11 Search
FN + F12 Home Page

FN + 1 Bluetooth Device 1
FN + 2 Bluetooth Device 2
FN + 3 Bluetooth Device 3
FN + 4 2.4GHz Wireless
FN + 5 Wired

BACKLIGHT SETTINGS

FN + BACKSPACE Turn off/on the backlight
FN + END Switch the backlight mode
FN + HOME Switch the light color
FN + PGUP Switch the light direction
FN + ← Backlight speed+
FN + → Backlight speed-
FN +↑ The backlight brightness+
FN +↓ The backlight brightness-
FN + R-CTRL Toggle the side glow effect
FN + R-ALT Toggle the side light color
FN + [ Side light brightness+
FN + ] Side light brightness-
FN + ; Side light speed+
FN + ‘ Side light brightness-

INDICATOR INSTRUCTIONS:

1: Caps Lock
2: Win / Fn Lock
3: Keyboard Lock
4: Battery Indicator

PAIRING BLUETOOTH

FN+1/2/3 Long Press for 3 seconds to pair bluetooth device
FN+1/2/3 Short Press to switch to last paired device

Long press the FN+1/2/3 for 3 seconds, the keyboard will start pairing and the light under the 1/2/3 key will flash quickly.
Short press FN+1/2/3 to switch to the bluetooth mode 1/2/3, the light under the 1/2/3 key will flash slowly.
(If it has never been paired or there’s no connection, the keyboard will enter into sleep mode)

PAIRING WIRELESS 2.4GHZ

FN+4 Switch to Wireless Mode
Short press Fn+4 to the 2.4Ghz mode, then insert the receiver into your device.

KEY BOARD SLEEPING

When your keyboard is on 2.4GHz mode or Bluetooth mode, if there is no operation for 5 minutes, the backlight will turn off, and keyboard will enter into deep sleep without operation for 30 minutes.

Battery Tips | Red light flashes slowly|

Low Battery
(when the battery is lower than 5%)

---|---|---
Yellow light always on| Charging
Green light always on| Fully Charged

POWER QUERY

When the backlight is turned on, press the key combination Fn+Space, the backlight will turn off, and the number keys 1 to 0 will light up to display the power ratio. Example 1-5 light means 50%.

REPLACING KEYCAPS AND SWITCHES

For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser:
https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your- mechanical-keyboard-switches

EPOMAKER EP75 Wired-Wireless Mechanical B01

Before installing switches, be sure the pins are clean and straight.

Push Straight Down

Please be gentle. Be sure the pins are aligned with the slots.

Included Tool

2-in-1 Puller

Remove Switches

  1. Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
  2. Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
  3. Using firm but gentle force pull the switch away from the keyboard using a vertical motion.

The Switch Puller tool aligns Vertically to the Switch to unclip the plastic securing the switch to the plate.

  1. Mechanical Switch
    Example of a switch as seen from top after you remove the keycap to prepare for switch removal.

  2. Logo

  3. Switch Shaft

Install Switches

  1. Check that all the switch metallic pins are perfectly straight and clean.
  2. Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
  3. Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
  4. Inspect the switch to ensure it’s properly attached to your keyboard, and test it.

Note: If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.

Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.

TECHNICAL ASSISTANCE

For technical assistance, please email to support@epomaker.com with your purchase order number and a detailed description of your issue.

We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store of Epomaker, please contact them directly for any additional help.

COMMUNITY FORUMS

Join our community and learn together with other keyboard enthusiasts.

https://discord.gg/2q3Z7C2
https://www.reddit.com/r/Epomaker/

WARRANTY

EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker.

We provide a 1 year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1 year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc.

We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals