BenQ EC3-CW Wireless Mouse User Manual
- June 8, 2024
- BenQ
Table of Contents
BenQ EC3-CW Wireless Mouse User Manual
Specification
- No driver needed.
- Connection:
- Wireless: 2.4G RF
- Wired: USB (Auto switch to wired mode when USB cable is connected)
- DPI (Dots per inch) settings: 400/800/1600/3200 dpi
- Adjustable USB report rate: 125/500/1000 Hz
- Connector: USB type-A on a PC; USB type-C on a device
- Buttons: 7 buttons
- Switch 1: (switch for power off and two receivers)
- Cable: USB type-A to USB type-C (2 meters/6.6 feet)
- Mouse (EC1-CW/EC2-CW/CW3-CW): 5V 500mA
- Enhanced Wireless Receiver (ER-80): 5V 500mA
- USB Wireless Receiver (RX-80): 5V 100mA
- Battery: 3.7V 300mAh
Changing DPI setting
Press the DPI switch (labeled (6) to switch to a desired DPI setting.
Adjusting USB report rate
Press the report rate switch (labeled 7) to switch to a desired report rate setting.
Changing The lift off distance (LOD) of your mouse
You might want to change the LOD to work with your mouse pad properly.
Disconnect the mouse first, and press and hold the following combination keys
together while reconnecting the mouse.
- For a lower LOD: buttons 4 + 1
- For a medium LOD: buttons 5 + 1
- For a higher LOD: buttons 4 + 1 + 2
Changing click response time
You can change click response time as desired, Disconnect the mouse first, and press and hold the following key while reconnecting the mouse.
- Fast response time: 4
- Normal response time: 5
LED indicator on Enhanced Wireless Receiver
Solid white: In sleep mode.
Dark white: In normal operation.
Flashing amber, week signal. Move the mouse within the effective range to
improve signal strength.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>