ANBAZAR 00179ANNA Gray Full Platform Bed Instruction Manual

ANBAZAR 00179ANNA Gray Full Platform Bed Instruction Manual

SAFETY WARNINGS

1. Follow the information on the warning label appearing on the upper bunk end structure and on the carton… Do not remove warning label from bed.
2. Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 inches below the upper edge of guard rails.
4. Do not allow children under 6 years to use the upper bunk.
5. Prohibit more than one person on upper bunk.
6. Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use the ladder for entering and leaving upper bunk.
9. Do not use substitute part. Contact the manufacturer or dealer for replacement part.
10. Use of night light may provide added safety precaution for a child using the upper bunk.
11. If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
12. Always use guardrail on both long sides of the upper bunk.
13. The use of water or sleep flotation mattresses is prohibited.
14. Keep these instruction for future reference.
15. Strangulation Hazard – Never attach or hang items to any part of the bunk bed that are not designed for use with the bed, for example, but not limited to hooks, belts and jump rores.
16. Trundle : Only use for mattress 6 inch.

Assembly instructions

BED WITH 2 DRAWERS
(WF280119 & WF280121)

BED WITH TRUNDLE
(WF280120 & WF280121)

Part List and Hardware list

Part List (WF280121)

Part List (WF280119)

Hardware list (inside box WF280119)

Part List (WF280120)

Hardware List (Inside box WF280120)

Instructions

STEP1: Following below illustration Assembly Plastic Feet #1 With Footboard(A4) to complete Footboard

STEP2: Following below illustration:
Using hardware #8 to connect Legs(A18tA2) With Headboard Frame(A3) to complete Headboard

STEP3: Following below illustration Using hardward #2,#3 to Assembly Headboard (Completed on step 2) and Footboard (Completed on step 1) with siderail B(x2) .Look at detail view for more detail

STEP4: Following below illustration Using hardward #2 to Assembly Slats Cl (x3) with Support Slats C2(x3) .Look at detail view for more detail

STEP5: Following below Illustration:
Screw 3 slats (Completed on step 4) and 7 slats C3 by using hardward #4. -Look at detail view for more detail.

STEP 6-1: Following below illustration. Assembly Drawers (x2) if you bought Combo Bed with Trundle please skip this step and move ahead to step 8-1

STEP 6.2 to 6.4

STEP7: CONGRARULATION. YOU HAVE COMPLETED THE BED. just one more step to push the Under Drawer into it position

STEP 8-1: Following below illustration. Assembly Trundle. If you bought Combo Bed with 2 Drawers please ignore this step.
Screw Wheels (#5) With Slats F(x3) using hardware #6.

STEP8-2: Following below illustration:
Screw 10 slats F with Front Trundle(D) and Back Trundle(E) using hardward #4.
Screw Steel Bracket (#7) with Front Trundle(D) and slats F using hardward #5
Look at detail view for more detail

STEP9: CONGRARULATION. YOU HAVE COMPLETED THE BED. just one more step to push the Under Drawer into it position.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>