anko Punch Needle Instruction Manual
- June 8, 2024
- Anko
Table of Contents
anko Punch Needle
KIT INCLUDES
HOW TO THREAD A NEEDLE
- Insert the threader from the needle tip to the needle top.
- Place the end of the yarn into the threader and pull the threader back out of the needle tip.
- Insert the threader through the hole of the needle tip and place the end of the yarn into the threader and pull it back out of the hole. Remove the yarn from the threader. Threading is completed.
FLAT STITCHES
- Place the fabric in the hoop with the outlined side of the fabric facing upwards.
- Refer to the image on the box for the yarn colour. Holding the needle like a pencil press the needle all the way through the fabric, so the grip of the needle touches the fabric. Then, lift the needle out of the fabric just enough to move on to the next stitch.
TIPS:
The punch needle should penetrate all the way through the fabric so that the
grip of the needle touches the fabric. The needle must be pushed all the way
in on each stitch, to create an even look. Lift the needle out of the fabric,
just enough to move on to the next stitch. Keep the needle as close to the
fabric as possible. Lifting the needle too high shortens the loops on the
front of the design and creates unwonted loops on the back.
MADE IN CHINA
KMART AUSTRALIA LIMITED FOR AU NZ IMPORTED FOR KMART STORES RN AUSTRALIA AND
NJ! ZEALAND KMART AUSTRALIA – 690 SPRING SALE ROAD. MULGRAVE, WC 3171)
AUSTRALIA KMART NEW ZEALAND – REGIONAL OFFICE CA) KMART PAAVOETOE STORE.
HUNTERS PLAZA GREAT SOUTH ROAD PAPATOETOE, AUCKLAND, NEW ZEALAND
KMART CUSTOMER SERVICE
AU 1800 124 125 NZ: 0800 945 995.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>