VISUAL COMFORT TOB 3687 Minx Large Table Lamp Installation Guide
- June 8, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT TOB 3687 Minx Large Table Lamp
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
Scissors
ASSEMBLY INSTRUCTIONS
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Thread shade riser (C) to the top of cluster (D).
-
Remove finial (A) from shade riser (C).
-
Remove shade (B) from packaging and install to shade riser (C) using finial (A).
NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. -
Install light bulbs into the sockets.
-
Remove protective cover (E) from plug.
-
Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.