SONIFEX CM-ULR1 Unbalanced to Balanced Audio Converter User Manual
- June 8, 2024
- SONIFEX
Table of Contents
- SONIFEX CM-ULR1 Unbalanced to Balanced Audio Converter
- Register Online for an Extended 2 Year Warranty
- Sonifex Warranty & Liability Terms & Conditions
- Unpacking Your Product
- Repairs & Returns
- Passive Packs
- CM-ULR1 & CM-ULX1 Unbalanced to Balanced Audio Converters
- Block Diagrams
- Connectors & Controls
- Technical Spec CM-ULR1/CM-ULX1
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SONIFEX CM-ULR1 Unbalanced to Balanced Audio Converter
Manufacturers of Audio Products for AV, Installed Sound, Broadcast Radio & Broadcast TV
For the latest Sonifex handbook information please visit the Sonifex website
at www.sonifex.co.uk
This handbook is for use with the following products:
CM-ULR1 Unbalanced to Balanced Audio Converter
CM-ULX1 Unbalanced to Balanced Audio Converter
Stock Code: 30-377 Artwork: AW10921
©Sonifex Ltd, 2020
All Rights Reserved
Revision 1.03, February 2020
Sonifex Ltd, 61, Station Road, Irthlingborough,
Northants, NN9 5QE, England.
Tel: +44 (0)1933 650 700
Fax: +44 (0)1933 650 726
Email: sales@sonifex.co.uk
Website: https://www.sonifex.co.uk
Information in this document is subject to change without notice and does not
represent a commitment on the part of the vendor. Sonifex Ltd shall not be
liable for any loss or damage whatsoever arising from the use of information
or any error contained in this manual. No part of this manual may be
reproduced or transmitied in any form or by any means, electronic or
mechanical, including photocopying, recording, information storage and
retrieval systems, for any purpose other than the purchaser’s personal use,
without the express written permission of Sonifex Ltd. Unless otherwise noted,
all names of companies, products and persons contained herein are part of a
completely fictious adaptation and are designed solely to document the use of
Sonifex product.
Made in the UK by
Register Online for an Extended 2 Year Warranty
www.sonifex.co.uk/register
Product Warranty – 2 Year Extended
As standard, Sonifex products are supplied with a 1 year back to base
warranty. In order to register the date of purchase and so that we can keep
you informed of any product design improvements or modifications, it is
important to complete the warranty registration online. Additionally, if you
register the product on the Sonifex website, you can increase your product
warranty to 2 years. Go to the Sonifex website at: www.sonifex.co.uk/register
to apply for your 2 year warranty.
Sonifex Warranty & Liability Terms & Conditions
Definitions
‘the Company’ means Sonifex Ltd and where relevant includes companies within
the same group of companies as Sonifex Limited. ‘the Goods’ means the goods or
any part thereof supplied by the Company and where relevant includes: work
carried out by the Company on items supplied by the Purchaser; services
supplied by the Company; and software supplied by the Company. ‘the Purchaser’
means the person or organisation who buys or has agreed to buy the Goods. ‘the
Price’ means the Price of the Goods and any other charges incurred by the
Company in the supply of the Goods. ‘the Warranty Term’ is the length of the
product warranty which is usually 12 months from the date of despatch; except
when the product has been registered at the Sonifex website when the Warranty
Term is 24 months from the date of despatch. ‘the Contract’ means the
quotation, these Conditions of Sale and any other document incorporated in a
contract between the Company and the Purchaser. This is the entire Contract
between the parties relaling to the subject matter hereof and may not be
changed or terminated except in writting in accordance with the provisions of
this Contract. A reference to the consent, acknowledgement, authority or
agreement of the Company means in writting and only by a director of the
Company.
Warranty
-
a. The Company agrees to repair or (at its discretion) replace Goods which are found to be defecftive (fair wear and tear excepted) and which are returned to the Company within the Warranty Term provided that each of the following are satisfied:
- i. notfication of any defect is given to the Company immediately upon its becoming apparent to the Purchaser;
- ii. the Goods have only been operated under normal operating conditions and have only been subject to normal use (and in particular the Goods must have been correctly connected and must not have been subject to high voltage or to ionising radiation and must not have been used contrary to the Company’s technical recommendations);
- iii. the Goods are returned to the Company’s premises at the Purchaser’s expense;
- iv. any Goods or parts of Goods replaced shall become the property of the Company;
- v. no work whatsoever (other than normal and proper maintenance) has been carried out to the Goods or any part of the Goods without the Company’s prior written consent;
- vi. the defect has not arisen from a design made, furnished or specified by the Purchaser;
- vii. the Goods have been assembled or incorporated into other goods only in accordance with any instructions issued by the Company;
- viii. the defect has not arisen from a design modified by the Purchaser;
- ix. the defect has not arisen from an item manufactured by a person other than the Company. In respect of any item manufactured by a person other than the Company, the Purchaser shall only be entitled to the benefit of any warranty or guarantee provided by such manufacturer to the Company.
-
b. In respect of computer software supplied by the Company the Company does not warrant that the use of the software will be uninterrupted or error free.
-
c. The Company accepts liability:
- i. for death or personal injury to the extent that it results from the negligence of the Company, its employees (whilst in the course of their employment) or its agents (in the course of the agency);
- ii. for any breach by the Company of any statutory undertaking as to title, quiet possession and freedom from encumbrance.
-
d. Subject to conditions (a) and (c) from the me of despatch of the Goods from the Company’s premises the Purchaser shall be responsible for any defect in the Goods or loss, damage, nuisance or interference whatsoever consequential economic or otherwise or wastage of material resulting from or caused by or to the Goods. In particular the Company shall not be liable for any loss of profits or other economic losses. The Company accordingly excludes all liability for the same.
-
e. At the request and expense of the Purchaser the Company will test the Goods to ascertain performance levels and provide a report of the results of that test. The report will be accurate at the me of the test, to the best of the belief and knowledge of the Company, and the Company accepts no liability in respect of its accuracy beyond that set out in Condition (a).
-
f. Subject to Condition (e) no representation, condition, warranty or other term, express or implied (by statute or otherwise) is given by the Company that the Goods are of any particular quality or standard or will enable the Purchaser to attain any particular performance or result, or will be suitable for any particular purpose or use under specific conditions or will provide any particular capacity, notwithstanding that the requirement for such performance, result or capacity or that such
particular purpose or conditions may have been known (or ought to have been known) to the Company, its employees or agents. -
g. i. To the extent that the Company is held legally liable to the Purchaser for any single breach of contract, tort, representation or other act or default, the Company’s liability for the same shall not exceed the price of the Goods.
- ii. The restriction of liability in Condition (g)(i) shall not apply to any liability accepted by the Seller in Condition (c).
-
h. Where the Goods are sold under a consumer transaction (as defined by the Consumer Transactions (Restrictions on Statements) Order 1976) the statutory rights of the Purchaser are not affected by these Conditions of Sale.
Unpacking Your Product
Each product is shipped in protective packaging and should be inspected for damage before use. If there is any transit damage take pictures of the product packaging and notify the carrier immediately with all the relevant details of the shipment. Packing materials should be kept for inspection and also for if the product needs to be returned. The product is shipped with the following equipment so please check to ensure that you have all of the items below. If anything is missing, please contact the supplier of your equipment immediately.
Repairs & Returns
Please contact Sonifex or your supplier if you have any problems with your Sonifex product. Email technical.support@sonifex.co.uk for the repair/upgrade/returns procedure, or for support & questions regarding the product operation.
Conformity
The products in this manual comply with the essential requirements of the
relevant European health, safety and environmental protection legislation.
The technical just fication file for this product is available at Sonifex Ltd.
The declaration of conformity can be found at:
http://www.sonifex.co.uk/declarations
WEEE Directive The Waste Electrical and Electronic Equipment (WEEE) Directive was agreed on 13 February 2003, along with the related Directive 2002/95/EC on Restrictions of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS). The Waste Electrical and Electronic Equipment Directive (WEEE) aims to minimise the impacts of electrical and electronic equipment on the environment during their life mes and when they become waste. All products manufactured by Sonifex Ltd have the WEEE directive label placed on the case. Sonifex Ltd will be happy to give you information about local organisations that can reprocess the product when it reaches its “end of use”, or alternatively all products that have reached “end of use” can be returned to Sonifex and will be reprocessed correctly free of charge.
Atmosphere/Environment
This apparatus should be installed in an area that is not subject to excessive
temperature variation (<0°C, >50°C), moisture, dust or vibration. This
apparatus shall not be exposed to dripping or splashing, and no objects filled
with water, such as vases shall be placed on the apparatus.
Passive Packs
The passive packs are a range of small utility products which use transformers
to change audio input & output impedances and levels and to distribute audio
signals.
There are a range of different products to suit different needs:
- CM-HPR1 Headphone Volume Control
- CM-HPX1 Headphone Volume Control
- CM-ULR1 Unbal to Bal Audio Converter
- CM-ULX1 Unbal to Bal Audio Converter
- CM-LUR1 Bal to Unbal Audio Converter
- CM-LUX1 Bal to Unbal Audio Converter
- CM-AESX3 3 Way Dig AES3 Splitter, XLR
- CM-AESB3 3 Way Dig AES3ID Splitter, BNC
- CM-MS3 3 Way Microphone Splitter
CM-MNT1 Desk Mount Panel
All of the products, along with the CM-TBU and CM-TLL, can be mounted to the
underside of a desk using the CM-MNT1 desk mount plate. This fixes to the top
side of the product and screws to the underside of a surface.
CM-ULR1 & CM-ULX1 Unbalanced to Balanced Audio Converters
These two products allow the connection of a stereo unbalanced line input on phono connectors to a balanced line output (RJ45 on the CM-ULR1 with StudioHub+™ pinout, 2 x male XLRs on the CM-ULX1). They are transformer balanced, with a 1:2 ratio, so 6dB of gain is added to the input to help interface with the higher signal levels associated with professional outputs. These units are passive versions of the RB-UL1, and provide you with an alternative to wiring an unbalanced output directly into a balanced input. By placing one of these boxes close to the unbalanced output (before the cable run to the balanced input), the connection will benefit from the input device’s common mode rejection capabilities, reducing noise and interference.
Block Diagrams
Connectors & Controls
RCA Phono Inputs
Both units use a stereo unbalanced line phono connector with the following
connections:
Analogue Outputs CM-ULR1
The stereo balanced line output is on a female RJ45 connector with the
following standard StudioHub+™ pin assignments:
Analogue Outputs CM-ULX1
The stereo analogue balanced line output is on two male 3 pin XLR connectors
with the following pin assignments:
- Pin 1: 0V Common
- Pin 2: Phase
- Pin 3: Non Phase
Technical Spec CM-ULR1/CM-ULX1
www.sonifex.co.uk
t:+44 (0)1933 650 700 f:+44 (0)1933 650 726
sales@sonifex.co.uk
References
- Welcome to Sonifex - Manufacturers of Broadcast Audio & Video Equipment for Radio & TV Studios
- Welcome to Sonifex - Manufacturers of Broadcast Audio & Video Equipment for Radio & TV Studios
- sonifex.co.uk/register
- Welcome to Sonifex - Manufacturers of Broadcast Audio & Video Equipment for Radio & TV Studios
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>