SONIFEX CM-CU21 Commentatator Unit User Manual
- June 1, 2024
- SONIFEX
Table of Contents
SONIFEX CM-CU21 Commentatator Unit
The new AVN (Audio Video Network) products are designed to operate over a standard CAT5 infrastructure, offering Dante®, AES67 AoIP compatibility and simple web server configuration.
AVN-CU2 Configurable Dante Commentary Unit for 2 Commentators
The AVN-CU2 takes a new approach to provide a multi-purpose configurable tool for commentary teams. Its power lies in the impressive mix engine which overlays the usual Dante® Controller settings. Once Dante® flows have been made, inputs and outputs can be mixed freely to AoIP or physical inputs and outputs, controlled using the programmable buttons and rotary encoders, which control the gain and pan of inputs, outputs or cross-points, allowing total flexibility for different situations. It can be used in any number of different commentary situations, controlled manually or remotely and controls can be ‘locked down’ so that they can’t be tampered with or altered, to guarantee reliable operation.
If you’re putting audio onto your Dante® network, make it the best audio quality that it can be, by using the Sonifex DIO audiophile Dante® interfaces. These simple plug and play audio interfaces provide a convenient and elegant method of connecting legacy analogue and digital audio equipment to the Dante AoIP audio network.
What’s the difference between these units and others? The audio quality. We’re using A/D and D/A circuitry that provides analogue performance that’s 10 times better than similar competing products, offering >120dB of dynamic range.
- AVN-DIO01 Dante to Analogue XLR Stereo Output
- AVN-DIO02 Analogue XLR Stereo Input to Dante
- AVN-DIO03 Dante to Headphone Output (1/4” & 3.5mm Jacks) With Volume Control & Limiter
- AVN-DIO04 Dante to Analogue Phono Stereo Input & Output
- AVN-DIO05 Dante to Analogue Terminal Block Stereo Input & Output
- AVN-DIO06 Dante to AES3 XLR Stereo Input & Output
- AVN-DIO07 Dante to AES3 BNC Stereo Input & Output
- AVN-DIO08 Dante to AES3 Terminal Block Stereo Input & Output
- AVN-DIO09 Microphone Input to Dante
- AVN-GPIO GPIO to LAN Transceiver
- AVN-DIO10 Dante® to 3G/HD/SD-SDI Embedder/De- Embedder
- AVN-DIO12 Dual Microphone Input to Dante® with Mic Gain Converter
- AVN-DIO14 Dante® to XLR Analogue Stereo Input & Output
- AVN-DIO15 4 Analogue XLR Inputs to Dante®
- AVN-DIO16 Dante® to 4 Analogue XLR Outputs
- AVN-DIO19 Dante® to AES3 16 Channel I/O Converter
- AVN-DIO20 Dante® to MADI AES3 64 Channel I/O Converter
AVN-AH8 8 Stereo Headphone Outputs Dante Interface
The AVN-AH8 multi-channel headphone amplifier is a 1U rack-mount which distributes 2 sets of stereo audio to up to 8 different sets of headphones, fed from the Dante AoIP network.
AVN-GPIO GPIO to LAN Transceiver
The AVN-GPIO converts GPIO (General Purpose Inputs & Outputs) to network commands to control, and be controlled by, other equipment or software across a standard network.
PTP Grandmaster Clock with GPS Receiver
The AVN-GMCS is a GPS receiver and PTPv2 grandmaster clock for usewith AoIP applications. IEEE1588-2008 PTPv2 (precision time protocol) is used to synchronise all the nodes within a network. The AVN-GMCS supports the Default (RAVENNA) & Media (AES67) Profiles and has PTPv2 time stamping resolution to 8nsec. Options for precision onboard crystals provides accurate holdover sync if the GPS signal is lost. The unit also has physical wordclock, AES and PPS outputs for studio use.
Multi-Channel Dante® Audio Interfaces
These new Dante® audio interfaces convert balanced analogue audio line
inputs and outputs to Dante AoIP. Simple to configure and operate, these cost
effective rack-mount solutions offer an easy solution for AV professionals and
system integrators, with PoE power and AES67/DDM compatibility.
- AVN-AIO4 4 Input, 4 Output Dante® Interface, PoE
- AVN-AIO8 8 Input, 8 Output Dante® Interface, PoE
- AVN-AIO8R 8 Input, 8 Output, Dual Dante® Interface, PoE
- AVN-AI16 16 Input Dante® Interface, PoE
- AVN-AI16R 16 Input Duel Dante® Interface, PoE
- AVN-AO16 16 Output Dante® Interface, PoE
- AVN-AO16R 16 Output Dual Dante® Interface, PoE
- AVN-AESIO8 8 AES3 Input, 8 AES3 Output Dante® Interface, PoE
- AVN-AESIO8R 8 AES3 Input, 8 AES3 Output Dual Dante® Interface, PoE
12 x 2 Channel AES67 Mix Monitor
The AVN-PXH12 is a world first – it can simply and effectively simultaneously monitor and mix up to 24 x AES67 AoIP sources in a compact 1U rack to a speaker/headphone combination in a quick and intuitive way.
Multi-Channel Audio Interfaces Using AES67
These are a range of 3 audio interface portals which mix and route analogue, AES3, microphone & AES67 stream inputs to analogue, AES3 & AES67 outputs.
- AVN-PA8D 8 Stereo Analogue Line Inputs & Outputs
- AVN-PD8 8 Stereo Digital Line Inputs & Outputs
- AVN-PM8 8 Mic/Line Inputs, 8 Line Outputs
Each of the portals can be ordered either with the input/output metering displays (D version) or without. All units have input/ output/crosspoint level trim and output limiters.
IP Streamers
The Pro Audio Streamers are a range of three IP to audio and audio to IP streamers. They each have professional analogue and digital inputs/outputs and allow audio to be streamed around a building, wan or lan using IP audio and CAT5 cabling infrastructure.
- The PS-SEND-SD which converts an audio input to an IP stream.
- The PS-PLAY which reads an IP stream and outputs to balanced and unbalanced audio line levels.
- The PS-AMP which reads an IP stream and outputs audio to stereo speakers.
Audio Monitors
The Reference Monitor Range is a series of rack-mount audio monitors, combining the latest DSP technology with outstanding audio enclosure design to produce monitors of the highest standards with exceptional sound quality, a comprehensive feature set and good looks in the rack.
Reference Monitors
Confidence Monitors
Reference Monitor Controllers
LED Studio & Room Signs
The SignalLED range of illuminated RGB LED signs are designed for use outside recording, on-air & production studios, meeting rooms, conference rooms and for fixed installations.
Low Energy Illuminated Signs:
- Low power consumption, only 4W.
- Maintenance free, LED lighting.
- Multi-coloured RGB LEDs offering 9 different colours.
- Sign can be made to flash, pulse, fade and be on or off.
- Flush-mounting as standard, end/ceiling-mounting kits.
- 20cm (8”) or 40cm (16”) widths or 2 x 20cm (2 x 8”).
- Standard wording includes: MIC LIVE, ON AIR, RECORD, PHONE, TRAFFIC FLAG ON, AD BREAK, TX, REH, REHEARSAL, DOOR, OBIT, NO ENTRY, EXIT, SILENCE PLEASE, MEETING IN PROGRESS, INTERVIEW IN PROGRESS.
- Custom signs – company logos, different wording or graphics.
- 2 x GPIs for light switch, or fader GPO control.
- Supplied as standard as red/green switching.
- Programmer colours, etc, using LD-RPC remote.
- Supplied complete with fixings & DC power supply
Radio Broadcast Mixing Consoles
The S0v2, S1 and S2 mixers are high quality radio broadcast consoles offering all the features needed for professional use in small scale community, commercial and student radio.
S0v2 Radio Broadcast Mixer
The S0v2 is a high quality yet simple to operate radio broadcast mixer
ideally suited to community radio stations, for educational purposes and for
internet radio.
S1 Digital/Analogue Radio Broadcast Mixer
The S1 has an amazing feature set and offers a proper broadcast solution to
community, educational and student radio stations that need a versatile,
reliable radio broadcast mixer.
S2 – Digital I/O Analogue Radio Broadcast Mixer
The S2 combines all the features needed of a modular radio broadcast mixer in
a stylish, flush-mounting chassis.
Talkback & IFB
Talkback and IFB facilities for small OB trucks with a talkback controller & headphone amplifier belt packs.
CM-TB8 8 Channel Talkback Control Unit
The CM-TB8 is a powerful and highly flexible self contained communications
unit allowing multiple 4-wires and IFBs within a single 1U rack space
.
CM-TB8G/T GSM & Telco Options for CM-TB8
Plug-in cards allow two channels of the 4 wire/IFB comms to talk to either 2 x
GSM lines or 2 x POTS lines with full duplex communication.
Commentary
Commentary units consist of the single position CM-CU1 Commentator Unit and the CM-CU21 Commentator Unit for 2 Commentators & 1 Guest.
Belt Packs
Two ergonomic, battery powered belt-packs:
- The CM-BHA is a headphone amplifier for use in live applications.
- The CM-BH4W is a 4 wire & 2 wire portable communication unit.
Redbox Audio & Video Interfaces
Redbox is a range of products used for interfacing equipment in radio and TV broadcast networks. They are the ‘glue’ which hold broadcast infrastructure together, simply fit and forget them.
Digital Audio Converters
- RB-ADDA Combined A/D and D/A Converter.
- RB-ADDA2 Combined A/D and D/A Converter, 24bit 192kHz.
- RB-SC2 Dual Sample Rate Converter, 24bit 192kHz.
- RB-DAC1 Digital to Analogue Converter.
Synchronisation Add-On Boards
- RB-SYA Analogue Video Sync Add-On Board.
- RB-SYD Digital Video Sync Add-On Board.
- RB-SYE AES/EBU Sync Board.
- RB-SYW Word Clock Sync Board.
Synchronisers, Delays & Silence Detectors
- RB-DS2 Stereo Delay Sync & Time Zone Delay.
- RB-DS2R Remote Switch Panel For RB-DS2.
- RB-PD2 Stereo Profanity Delay.
- RB-DD4 4 Channel Digital Audio Delay.
- RB-AEC Acoustic Echo Canceller.
- RB-SD1 Silence Detect Unit.
- RB-SD1IP Silence Detection Unit With Ethernet & USB.
- RB-DSD1 Digital Silence Detect Unit.
- RB-DSD8 8 Channel Silence Switcher.
- RB-FS42 Audio Failover Switcher, 4 Main I/O, 2 Standby I/O
- RB-FS82 Audio Failover Switcher, 8 Main I/O, 2 Standby I/O.
Matching Converters
- RB-UL2 Dual Unbalanced to Balanced Converter.
- RB-UL4 Quad Unbalanced to Balanced Converter.
- RB-LU4 Quad Stereo Balanced to Unbalanced Cnvrtr.
- RB-BL2 Unbalanced to Balanced Bi Directional Converter.
- RB-BL4 Dual Stereo Bi-Directional Matching Amplifier.
- RB-PA2 Dual Stereo RIAA Phono Amplifier.
- RB-LI2 Stereo Line Isolation Unit.
- RB-PLI6 6 Way Mono Passive Line Isolation Unit.
Audio Distribution Amplifiers
- RB-DA6 6 Way Stereo Distribution Amplifier.
- RB-DA6G 6 Way Stereo Distribution Amplifier With Output Gain Control.
- RB-DA6P 6 Way Stereo Distribution Amplifier With Phoenix Connectors.
- RB-DA6R 6 Way Stereo Distribution Amplifier With RJ45 Connectors.
- RB-DA6RG 6 Way Stereo Distribution Amplifier With RJ45 Connectors & Output Gain Cntrl.
- RB-DA4x5 4 Input, 4 x 5 Output Distribution Amplifier/Mixer.
- RB-DDA6A 6 Way AES/EBU Digital Distribution Amplifier.
- RB-DDA6A-2P 6 Way Stereo AES/EBU Digital Distribution Amplifier with Dual Power Supplies.
- RB-DDA6S 6 Way S/PDIF Digital Distribution Amplifier.
- RB-DDA6W 6 Way Word Clock Distribution Amplifier.
- RB-DDA6W-2P 6 Way Word Clock Distribution Amplifier with Dual Power Supplies.
- RB-DDA6A3 6 Way Stereo AES3ID Digital Audio Distribution Amplifier.
- RB-DDA22 Digital Audio Distribution Amplifier With Multiple Outputs.
- RB-DA24MD 24 Way Mono Audio Distribution Amplifier.
- RB-AES4B3 Quad 3 Way Passive AES3ID Splitter BNC Connectors.
- RB-AES4X3 Quad 3 Way AES/EBU Splitter XLR Connectors.
- RB-MS4X3 Quad 3 Way Passive Microphone Splitter.
- RB-MSP6 6 Way Phantom Power Supply.
Headphone Distribution Amplifiers
- RB-HD1 Stereo Headphone Amplifier.
- RB-HD2 Dual Stereo Headphone Amplifier.
- RB-HD6 6 Way Headphone Distribution Amplifier.
- RB-DHD6 Digital 6 Way Headphone Distribution Amp
Mixers, Source Selectors & Switchers
- RB-SS10 10 Way Stereo Analogue Source Selector/Mixer.
- RB-PMX4 10 Input, 4 Output Analogue Preset Mixer. Compressor/Limiter.
- RB-OA3 3 Studio On-Air Switcher.
- RB-OA3R Remote Switch Panel For RB-OA3.
- RB-OA3C Expansion Unit Cable Kit For The RB-OA3.
Microphone Amplifiers & Limiters
- RB-MA1 Single Microphone Amplifier.
- RB-MA2 Dual Microphone Amplifier.
- RB-MA2G Dual Microphone Amplifier with Gain Controls.
- RB-DMA2 Dual Digital Microphone Amplifier.
- RB-ML2 Microphone and Line Level Limiter.
- RB-SL2 Twin Mono, or Stereo, Limiter.
Stereo To Mono Converters
- RB-SM2 Dual Stereo to Mono Converter.
Power Controllers
- RB-LC3 3 Way Light/Power Controller.
Talkback & Communications
- RB-MM1 Mix-Minus Generator.
- RB-MTV1 Voiceover Monitor with Talkback.
- RB-IPE IP Extender for GPIO & Analogue Control Signals.
Tone Generators
- RB-TGHDB Multi-channel HD tone generator with BNC outputs.
- RB-TGHDX Multi-channel HD tone generator with XLR outputs.
Video Distribution Amplifiers
- RB-VHDA8 HD/SD-SDI 1 Input 8 Output Video Distribution Amplifier.
- RB-VHDA2x4 3G/HD/SD-SDI 2 Input, 8 Output Video Distribution Amplifier.
Video Embedders & De-Embedders
- RB-VHDMA8 3G/HD/SD-SDI De-Embedder, 8 Channel Analogue Outputs.
- RB-VHEMA8 3G/HD/SD-SDI Embedder, 8 Channel Analogue Inputs.
- RB-VHCMA4 3G/HD/SD-SDI Embedder & De-Embedder, 4 Channel Analogue I/O.
- RB-VHCMD16 3G/HD/SD-SDI Embedder & De-Embedder, 16 Channel Digital I/O.
Telephone Hybrids
Sonifex telephone hybrids are some of the best sounding hybrids in the world with analogue, digital, portable, GSM & HD Voice hybrids available.
Analogue Telephone Hybrids
The analogue HY-03 telephone hybrid sets the standard as an excellent value,
high quality telephone hybrid. It is fully automatic, with automatic signal
limiting, automatic call answering and both local and remote line hold
switching.
Digital Telephone Hybrids
The digital DHY-04 telephone hybrid is probably the best performing digital
hybrid in the world, with simply stunning line balance rejection figures –
76dB typically. It is fully automatic together with echo cancellation,
conferencing, front panel input and output gain controls and front panel LED
metering of receive and send signals. Additionally it has auto-sensing AES/EBU
or analogue XLR I/O, an Ethernet port for remote configuration and remote
control, SNMP and DTMF dial up recognition.
GSM Hybrid
The DHY-04G is a digital GSM hybrid which has all features of the DHY-04 but
uses a 2G cellular connection instead of an analogue POTS line. Ideal for
studios in remote locations and with the outstanding performance of the
DHY-04.
HD Voice Hybrid
The DHY-04HD HD Voice Hybrid is used on a 3G or GSM cellular phone network
instead of a telephone (POTS) line. The DHY- 04HD can accept a SIM card and by
connecting a GSM antenna, it can receive and make high quality broadcast calls
over the cellular network, converting the 3G/GSM call to the 4 wire audio
signal to/from a mixer. The cellular module is quad-band GSM and 5 band UMTS/
HSPA+, to take/make calls on any 2G/GSM, or 3G network.
Portable Telephone Hybrids
The CM-TBU line-powered telephone balance unit is a basic hybrid for 2-way
talkback purposes and the CM-TLL provides a low-loss interface to receive
audio from a telephone line.
Audio Logging
The Net-Log has been specifically designed for long-term recording and
archival.
It uses a dedicated hardware recording platform with a simple network connection for audio playback.
Audio & IP Stream Logging
Flashlog 8 is configurable, ultra powerful multi-channel logging software. Using the Sonifex sound & radio capture cards, IP based line inputs and internet radio streams, Flashlog can be used to continuously log up to 2 years of radio broadcasts or audio. New features include archiving & logging of HLS streams.
PCle Sound & Radio Capture Cards
These professional sound cards and radio capture cards offer superior performance & exceptionally high channel counts.
Professional Sound Cards : The PC-AD2 2 Stereo Analogue I/O & 2 Stereo AES-3 I/O PCIe Half Height Sound Card is a dual stereo analogue input/output and dual stereo AES-3 digital input/output sound card in the PCIe half height format. One of the analogue inputs can be used as a mic input, there is a dedicated AES-11 sync input and also 2 GPIOs.
Radio Capture Cards:
The PC-AUR44 Auricon 4.4 PCIe Analogue Sound Card
UK Office:
Sonifex Ltd
61 Station Road, Irthlingborough,
Northants, NN9 5QE, UK
Tel: +44 (0) 1933 650700
Email:sales@sonifex.co.uk
Australian Office:
Sonifex Pty Ltd
12/6 Leighton Place,
Hornsby NSW 2077, Australia
Tel: +61 (2) 9987 0499
Email:sales@sonifex.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>