BaByliss ST573E Hydro-Fusion Styler Instruction Manual

BaByliss ST573E Hydro-Fusion Styler Instruction Manual

HOW TO USE

WARNING! Take care to avoid the hot surface of the appliance coming into direct contact with the skin, in particular the ears, eyes, face and neck.

WARNING! Do not touch the hot plates when the appliance is switched on.

**Switch Activation Control**

IMPORTANT! This appliance features delayed activation control. Immediately after turning the appliance on, you are able to adjust the temperature settings. After 5 seconds of the appliance being turned on or the LED becoming solid in colour, the temperature buttons will automatically lock. To adjust the heat settings, hold down the ‘+/-’ button for 1-2 seconds, this will deactivate the lock mode and allow the settings to be changed. To turn off the appliance whilst in lock mode, hold down the button marked ‘ ’’ until the unit switches off.

INSTRUCTIONS FOR USE

Straightening

• Ensure hair is dry and combed
• Divide the hair into
• Plug in the appliance and press and hold the ‘ ’ button for 1-2 seconds to switch

Please note: The blue LED light along the plate will illuminate to indicate the ionic feature is activated.

• To select a heat setting suitable for your hair type, press the  ‘+/-’  button.  The  indicator  light  will  blink until the heat setting selected has been reached. Once the temperature has been reached, the indicator will remain solid in

Please note: The appliance temperature settings will lock automatically after 5 seconds. (See Switch Activation Control).

• Take a section of hair and place it between the styling
• Starting at the root, close the plates applying gentle pressure and glide down the section in one smooth
• If you wish to create shape at the ends of the hair, slightly bend your wrist inwards as you reach the end of each
• Repeat as necessary through the remaining sections of
• Allow the hair to cool fully before combing

Creating Curls

• Plug in the appliance and press and hold the ‘ ’ button for 1-2 seconds to switch
• To select a temperature setting suitable for your hair type, press the ‘+/-’ button. The indicator light will blink until the heat setting selected has been reached. Once the temperature has been reached, the indicator will remain solid in
• Separate a section of hair. The smaller the section the more defined the The larger the section the looser the curl.
• Take the hair section and place between the plates, roughly 3 inches from the
• Holding the appliance handle in one hand, turn the appliance 180° back on itself so that the hair is wrapped once around the outside of the

WARNING: Hot surfaces! During use, take care not to bring the appliance into contact with the scalp, face, ears or neck.

• Slowly glide the appliance along the length of hair from root to tip in a downward
• Release the appliance from the
• To ensure the curl sits neatly in place, hold the end of the section you have curled and twist it in the direction of the

Heat Settings

If you have delicate, fine or coloured hair, use the lower heat settings. For thicker hair, use the higher heat settings. It is suggested to always complete a test on initial use to ensure the correct temperature is used on the hair type. Start on the lowest setting and increase the temperature until desired result is achieved.
Below is a guide of the temperature settings: Setting 1 = 150°C Setting 2 = 170°C Setting 3 = 190°C Setting 4 = 210°C Setting 5 = 235°C
Advanced Plasma Technology with Dual Ionic System The moisture balancing dual ionic system combines both positive and negative ions, that work together to hydrate the hair and to eliminate frizz as you straighten. Turning on the appliance will automatically activate the dual ionic system.

Please note: The blue LED light along the plate will illuminate to indicate the ionic feature is activated. The release of ions produces a buzzing noise and in high levels of humidity the occasional low voltage flash of light. This is completely normal.

Auto Shut Off

This appliance has an automatic shut off feature for added safety. If the appliance is switched on for more than 60 minutes continuously, then it will automatically switch off. To continue using the appliance after this time, press and hold the ‘ ’ button for 1-2 seconds to turn the power on.

Heat Wrap

The appliance comes with a heat wrap for use during and after styling. During use do not place the appliance on any heat sensitive surface, even when using the heat wrap provided. After use, switch off and unplug the appliance. Immediately wrap the appliance in the heat wrap provided and allow to fully cool down. Continue to keep it out of reach of children as it will remain hot for several minutes.

CARE & MAINTENANCE

To help keep your appliance in the best possible condition follow the steps below:

• Do not wrap the lead around the appliance, instead coil the lead loosely by the side of the
• Do not use the appliance at a stretch from the power
• Always unplug after

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>