Cosihome CH-ABK01 Premium Air Bed Instruction Manual

: June 11, 2024
: Cosihome

Table of Contents

Cosihome CH-ABK01 Premium Air Bed
Product Information
Product Operating Instructions
SAFETY INSTRUCTIONS
SPECIFICATION
OPERATING INSTRUCTIONS
FREQUENTLY ASKED QUESTIONS
STORAGE
CLEANING AND MAINTENANCE
IMPORTANT NOTES
RECYCLING AND DISPOSAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Cosihome CH-ABK01 Premium Air Bed

Product Information

The Cosi Home Premium Air Bed is a high-quality air mattress designed for comfortable sleeping or lounging.

The product comes in two models: CH-ABS01 and CH-ABK01.

Safety Instructions

Keep the air bed away from fire or flammable materials.
The air bed is not a flotation device.
Always unplug the air bed before relocating, servicing, or cleaning it to avoid electrical shock, fire, or injury to people.

Specification
The equipment complies with the applicable UK and EU safety requirements and regulations.

Product Operating Instructions

Inflation

Place the air bed on a flat surface and ensure there are no sharp objects that can puncture it.
Remove the power cord from the cord compartment and plug it into an electrical outlet.
Turn the control dial one click clockwise until the arrow points to INFLATE.
The air bed will take approximately 2 minutes to inflate. The king size air bed will take up to 3 minutes to inflate.
Once fully inflated, turn the control dial one click anticlockwise until the arrow points to OFF.
Unplug the power cord and store it in the cord compartment.

If electrical power is not available, then a conventional foot or manual- operated air pump can be connected to the air bed for inflation.

Deflation

Remove the power cord from the cord compartment and plug it into an electrical outlet.
Turn the control dial one click clockwise until the arrow points to DEFLATE.
The air bed will take approximately 1-2 minutes to deflate.
Once fully deflated, turn the control dial one click clockwise until the arrow points to OFF.
Unplug the power cord and store it in the cord compartment.

Frequently Asked Questions

Why is my air bed deflating?
There are a few reasons your air bed may be losing air:

The air bed may sag and require additional inflation to maintain its desired firmness. Inflate your air bed at least 30 minutes prior to first use and top up as required to allow the air bed to stretch to its natural shape.
The air bed is designed to lose a small amount of air through its seams during use to reduce the risk of tears and bursting when pressure is added. This also helps to prevent over-inflation.

For more information please scan the QR code!

Thank you for choosing to purchase a product from Cosi Home. Please read the entire manual carefully prior to first use and keep in a safe place for future reference.

SAFETY INSTRUCTIONS

WARNING: KEEP AWAY FROM FIRE OR FLAMMABLE MATERIALS.
WARNING: NOT A FLOTATION DEVICE.
WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, FIRE, OR INJURY TO PEOPLE, ALWAYS MAKE SURE THE APPLIANCE IS UNPLUGGED FROM THE
ELECTRICAL OUTLET BEFORE RELOCATING, SERVICING, OR CLEANING IT.
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE

FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO PERSONS, INCLUDING THE FOLLOWING:

Use this product only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction.
Children must be supervised not to play with the appliance.
Do not let children use the air pump.
The air pump is for indoor household use and similar applications only.
Do not immerse the electric air pump in water.
Keep away from fire.
Do not operate or expose the air pump to wet environments such as rain or water.
Do not leave the air pump unattended whilst in use.
Ensure the air pump suction and exhaust openings remain free of dust and debris.
Never insert fingers or metal objects into the air pump suction and exhaust openings.
Do not obstruct the air passage opening or insert any objects into the air passage opening.
Do not use the power cord or operate the air pump with wet hands to prevent electric shock.
Store the air bed and air pump indoors in a safe, clean, and dry place, away from sunlight when not in use.
Do not operate the air pump if there are signs of damage.
Do not get the flocked surface wet. If this becomes wet, remove any bedsheets or cloths and allow to air dry.
Never move, carry, or hang the air bed by the main power cable.
Ensure that the mains supply (including voltage, frequency, and power) complies with the rating label of the appliance.
Do not use the air pump for more than 5 consecutive minutes at a time. Allow the air pump to cool down for 20 minutes before each repeated use. The air pump is designed to fully inflate your air bed within 2-3 minutes. The pump will automatically turn OFF if overheating occurs. This is designed for your safety.
Do not place an infant to sleep on the mattress.
This product is not a toy. Children must not be left unattended when using the air bed.
Do not use flammable liquids or sprays with the air bed, such as aerosol tire repair products, as it may ignite or explode.
Use the air bed only as a mattress. Do not walk, stand or jump on the air bed.
This air bed is not a buoyancy aid, lifebuoy, or life-saving device. Do not use it on or near water.
Do not set up the bed near stairs, doors, sharp edges, or breakable objects. Provide adequate space between bed and objects to avoid entrapment. Make sure the area is flat, smooth, even and free of sharp 3 objects that could puncture the bed.
Keep pets away from the air bed. Pets may puncture the surface of the bed.
Avoid sleeping on the edge of the air bed. Edges produce less support than the middle of the bed.
Do not place an infant to sleep on the mattress.
Do not attempt to repair or adjust any electrical or mechanical elements in the appliance. Doing so may be unsafe and will void your warranty.
Infants have suffocated on inflatable mattresses. Never place infants aged birth to 15 months to sleep on this inflatable air mattress/air bed. Infants can suffocate on an under-inflated or deflated mattress, on bedding, by co-sleeping with another person, and by entrapment between the mattress and bed frame or between the mattress and a vertical surface.
Children can be entrapped between the inflatable mattress and an adjacent vertical surface. Provide at least a shoulder-width space between the inflatable mattress/air bed and adjacent vertical surfaces such as walls, dressers, or other objects.
Always keep the inflatable mattress fully inflated when in use.

WARNING: RISK OF SUFFOCATION.
Infants have suffocated on inflatable air beds. Never place an infant 15 months or younger to sleep on this inflatable air bed. Infants can suffocate on an under-inflated or deflated air bed, on bedding, by co-sleeping with another person, and by entrapment between the air bed and a vertical surface. Children can be entrapped between the inflatable air bed and an adjacent vertical surface. Provide at least a shoulder-width space between the inflatable air bed and the adjacent vertical surfaces such as walls, dressers, or other objects. Always keep the inflatable air bed fully inflated when in use.

Keep the appliance out of reach of children and pets.
Do not leave children alone or unattended in the area where the appliance is in use.
Cleaning and user maintenance shall not be made by children unless continuously supervised.
The appliance must have a minimum 50cm clearance around all sides.
Always turn the appliance off and disconnected from the power supply when not in use.
Avoid placing the appliance in areas where it can become a tripping hazard.
Avoid placing the power cord in areas where it can become a tripping hazard. Do not place the power cord under carpeting or cover it with rugs, runners or similar.
There may be a trace of odor during the first few minutes of initial use. This is normal and will quickly disappear.
Do not use the appliance near petrol, paints, flammable gases, ovens, or other heating sources.
Always plug the appliance directly into a wall socket. Avoid using extension leads where possible as they may overheat and cause a risk of fire.
Do not operate the appliance if there are signs of damage to the appliance, power cord, or any of the accessories supplied. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person in order to avoid a hazard.

SPECIFICATION

Model: CH-ABS01
Dimensions: 97 x 188 x 48cm
Net Weight: 4.71KG
Gross Weight: 5.369KG
Power: 120W
Voltage: Ac 220-240V~
Frequency: 50Hz
Model: CH-ABK01
Dimensions: 152 x 203 x 48cm
Net Weight: 7.13KG
Gross Weight: 7.63KG
Power: 120W
Voltage: Ac 220-240V~
Frequency: 50Hz

SYMBOLS EXPLAINED

Equipment complies with the applicable UK safety requirements and regulations.
Equipment complies with the applicable EU safety requirements and regulations.

OPERATING INSTRUCTIONS

Inflation

Choose a flat, indoor surface large enough to accommodate the inflated air bed.
Remove any sharp or pointy objects on or near the surface.
Lay the air bed out with the bottom surface touching the floor.
Open the cover at the top of the bed where the power cord is stored.
Make sure the manual inflation valve is closed.
Plug the power cord into an electrical outlet.
Turn the control dial clockwise until the arrow points to INFLATE (image 1).
The single-air bed will take up to 1.5 minutes to inflate. The king-size air bed will take up to 3 minutes to inflate.
When the air bed is fully inflated, turn the control dial one click anti-clockwise until the arrow points to OFF (image 2).
Lie down on the air bed to test the firmness. If too soft, repeat steps 7–9 as necessary.
Unplug the cord and store in the power cord compartment.

Inflation Option
If electrical power is not available, then a conventional foot or manual operated air pump can be connected to the air bed.

Deflation

Open the cover at the top of the bed where the power cord is stored.
Make sure the manual inflation valve is closed.
Plug the power cord into an electrical outlet.
Turn the control dial anti-clockwise until the arrow points to DEFLATE (image 3).
The air bed will take up to 3 minutes to deflate.
When the air bed is fully deflated, turn the control dial one click clockwise until the arrow points to OFF.
Unplug the cord and store in the power cord compartment.
Open the cover at the top of the bed where the power cord is stored.
Plug the power cord into an electrical outlet.
Turn the control dial anti-clockwise until the arrow points to DEFLATE (image 3).
The air bed will take up to 3 minutes to deflate.
When the air bed is fully deflated, turn the control dial one click clockwise until the arrow points to OFF.
Unplug the cord and store in the power cord compartment.

FREQUENTLY ASKED QUESTIONS

Why is my air bed deflating?
There are a few reasons your air bed may be losing air:

First Uses: During its first few uses, your Cosi Home Air Bed may sag and require additional inflation to maintain its desired firmness. This is because stretching is a natural characteristic of new vinyl and is normal for the first few days of use. Inflate your air bed at least 30 minutes prior to first use and top up as required to allow the air bed to stretch to its natural shape.
Normal Use: All air beds are designed to lose a small amount of air through their seams during use to reduce the risk of tears and bursting when pressure is added. This also helps to prevent over-inflation.
Increased Pressure: Your air bed may be deflating because the weight limit has been exceeded. Most of our air beds have a weight limit of 250kgs or 550lb. Please check the product page or the specifications in your instruction manual for product-specific weight limits.
Varying Temperatures: Air inside the air mattress can expand or contract when exposed to hot or cold temperatures. At cold temperatures, air naturally contracts inside the air bed and can lead to sagging. If deflation occurs, pump some more air into the mattress. At hot temperatures, air can expand inside the air bed and it will become hard and in extreme circumstances, burst. Release air to avoid damage to your air bed. Where possible, aim to keep surrounding temperatures consistent during use.
Puncture: Your air bed may be deflating because it has a puncture.

How do I find a puncture?
To find a puncture, please follow these steps:

Fill a spray bottle with soapy water e. g. washing up liquid.
Inflate your air bed fully and unplug the power cord from the mains power supply.
Spray the surface of the inflated air mattress, avoiding the air pump and electrical components.
Visually inspect the air bed. If there is a puncture, bubbles will start to form over the puncture as the air starts to leak out.
Wipe your air bed dry with a soft dry cloth.
Repair your puncture with the provided puncture kit.

STORAGE

Deflate the airbed following the ‘deflation’ instructions.
Make sure the airbed is clean and dry.
Lay bed flat with sleeping surface facing upwards. Fold the airbed loosely and avoid sharp bends, corners, and creases which can damage the airbed.
Store the air bed in a safe, clean, and dry place, out of reach of children when not in use.

CLEANING AND MAINTENANCE

WARNING: ALWAYS TURN THE APPLIANCE OFF AND UNPLUG THE POWER CORD FROM THE ELECTRICAL OUTLET BEFORE HANDLING OR CLEANING IT.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO RUN INTO THE INTERIOR OF THE AIR PUMP, AS THIS COULD CREATE A FIRE AND/OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR SOLVENTS, AS THIS WILL DAMAGE THE AIR BED.
Use soapy water to clean the PVC on the sides and bottom of your air bed.
Do not let the plush surface of your air bed get wet. If liquid does come in contact with the top of your air bed, blot it with a damp cloth and leave to air dry.
To repair punctures to the air bed, use only common PVC repair glue and patches. Do not use flammable aerosols on the surface of the air bed.
Do not attempt to clean the appliance in any other way than that detailed by the manufacturer.
Add ‘Clean the exterior surface of the appliance by wiping it with a soft, damp cloth. Dry the appliance with a soft, clean cloth.
To store your product, we recommend using the original or a similar-sized box.

IMPORTANT NOTES

The ambient temperatures of air have an effect on the air bed internal pressure. At low ambient temperatures the air will contract within the air bed and the air bed will feel softer: add air as necessary. At high ambient temperatures, the air within the air bed will expand significantly and the air bed will become hard and may burst: release air to avoid damage to the air bed or to soften the feel. Do not expose the air bed to extreme temperatures.

Air inside of bed may expand and contract with varying temperatures leading to reduced pressure inside of bed. If this occurs, simply add more air issuing the pump to achieve desired firmness. Stretching is a natural characteristic of new vinyl. During initial use, the air bed may become soft and require additional inflation to maintain desired firmness. This is normal for the first few days of use.
Under no circumstances will Cosi Home be liable for damages to the air bed caused by negligence, ordinary wear and tea, abuse and carelessness or external forces.

Explanation: Class II Double Insulated Equipment

RECYCLING AND DISPOSAL

Waste electrical and electronic products (WEEE), batteries, accumulators and packaging should not be disposed of with general household waste. This is to prevent possible harm to the environment and human well-being and to help conserve our natural resources.

Most electrical products with a plug, battery, or cable can be recycled. Contact your local council, household waste disposal service, or the store where you purchased the product for information regarding the collection schemes in your area.

Waste Electrical and Electronic Equipment (WEEE)
This symbol on the product and/or packaging indicates that Waste Electrical products (WEEE) under Directive 2012/19/EU which governs used electrical and electronic appliances, should not be disposed of with general household waste.

The Mobius Loop
This symbol indicates that the product or packaging is capable of being recycled.

Take-Back Scheme
Waste electrical products (WEEE) can be sent to One Retail Group for recycling and disposal when you purchase a new product from One Retail Group, on a like- for-like basis. For more information on how to recycle this product please visit www.cosihome.com.

The end-user of electrical and electronic products (WEEE) is responsible for separating old batteries and lamp bulbs before they are handed over to a designated disposal and recycling service. Waste batteries can also be disposed of in collection bins, which can be found in most local supermarkets and household waste recycling centers.

One Retail Group, Ryland House, 24a Ryland Road, London, NW5 3EH, United Kingdom

EU Authorised Representative:
Brandrep Limited, The Black Church, St Mary’s Pl N, Dublin, D07 P4AX, Ireland
www.cosihome.com.

For more information please scan the QR code!