BRAYER BR1053 Electric Water Kettle Instruction Manual

BRAYER BR1053 Electric Water Kettle

ELECTRIC KETTLE DESCRIPTION

1. Kettle flask
2. Kettle spout
3. Lid
4. Lid opening button
5. ON/OFF button (0/I)
6. Handle
7. Water level scale
8. Flask illumination
9. Base
10. Cord storage

SAFETY MEASURES AND OPERATION RECOMMENDATIONS

• Use the electric kettle for its intended purpose only, as it is stated in this manual.
• Mishandling the kettle can lead to its breakage and cause harm to the user or damage to his/her property and it is not covered by warranty.
• The kettle is intended for heating and boiling drinking water only, do not heat or boil any other liquids.
• Make sure that operating voltage of the electric kettle indicated on the label corresponds to your home mains voltage.
• The power plug is equipped with a grounding contact, plug it into the socket with
• reliable grounding contact. In case of short circuit the grounding reduces the risk of electric shock
• Contact an electrical technician, if you are not sure that your sockets are installed properly and grounded.
• To prevent fire do not use adapters designed for connecting the plug to the mains socket without grounding contact.
• In case of sparking in the mains socket and occurrence of smell of burning, unplug the unit and apply to the organization maintaining your home mains.
• If smoke appears from the body of the kettle, unplug the unit and take measures to prevent fire spreading.

BEFORE USING THE KETTLE

• Unpack the kettle and remove all the packaging materials.
• Keep the original package. Check the delivery set.
• Read the safety measures and operating recommendations.
• Examine the kettle for damages, in case of damage do not plug it into the mains.
• Make sure that the specifications of power supply voltage specified on the lower panel of the unit or the base correspond to the specifications of your mains.
• When using the kettle in the mains with 60 Hz frequency, the unit does not need any additional measures.
• Wipe the outer surface of the flask (1) with a clean, slightly damp cloth to remove dust.

USING THE ELECTRIC KETTLE

• Place the kettle on a solid steady flat and non-slip non-metal surface away from heat sources as far as possible from the edge of the surface.
• Ensure that the ON/OFF button (5) is always accessible and is not blocked by foreign objects.
• Make sure that the kettle is switched off, the ON/OFF button (5) is set to the position «0».
• To fill the kettle with water, take it off the base (9), press the lid (3) opening button (4).
• Fill the kettle with water not exceeding the maximal mark «MAX» on the water level scale (7).
• Close the lid (3) and put the full kettle on the base (9).
• Insert the power plug into the mains socket.
• To switch the kettle on, set the ON/OFF button (5) to the position «I», the illumination (8) of the kettle flask will light up.
• Once water starts boiling, the kettle will be switched off automatically and the illumination (8) of the flask will go out.
• Before removing the kettle from the base (9), make sure that the kettle is switched off, the ON/OFF button (5) is in the position «0».
• After switching the kettle off, wait for 15-20 seconds, then you can switch it on again for re-boiling.
• If you need to switch the kettle off, set the power switch (5) to the position «0».
• If you accidentally switched the kettle on, but the water level appeared to be below the minimal mark, the automatic thermal switch will be on and the kettle will switch off.
• Unplug the kettle and let it cool down for 10-15 minutes, then fill the kettle with water and switch it on, the kettle will operate in normal mode.

CLEANING AND MAINTENANCE

• Before cleaning unplug the kettle, pour out water and let the kettle cool down.
• Wipe the outer surface of the flask (1) with a slightly damp cloth and then wipe the flask (1) dry.
• Use soft detergents to remove dirt; do not use metal sponges, abrasive detergents and solvents.
• Do not immerse the electric kettle, the base (9) and the power cord into water or any other liquids, do not wash the kettle in the dishwasher.

DESCALING

• Scale, appearing inside the flask (1), influences the water taste and disturbs the heat exchange between water and the heating element. It also risks damaging the heating element. Burning of the heating element caused by the large amount of scale in the kettle is not covered by warranty.
• To remove scale, you can use special scale-removing agents, as well as household ones, for example, vinegar or citric acid.
• To remove scale, fill the flask (1) with water one-third full and boil it. Open the lid (3) and add table vinegar (6-9%) to the «MAX» mark, leave the liquid in the kettle for several hours. After the scale dissolves, pour out the liquid and rinse the flask (1) several times. To oust the smell of vinegar, boil water several times.
• Dissolve 25 g of citric acid in 500 ml of hot water.
• Fill the kettle with the prepared solution and leave for 15-20 minutes.
• After scale dissolves pour out the liquid and rinse the flask (1) several times, after that boil water several times.

STORAGE

• Before taking the kettle away for long storage, unplug it, pour out water and let the unit cool down.
• Clean the kettle flask (1).
• Fix the power cord in the cord storage (10) on the base (9).
• Pack the kettle in the original package.
• Keep the kettle in a dry cool place out of reach of children and
• disabled persons.

DELIVERY SET

•  Electric kettle — 1 pc.
• Instruction manual — 1 pc.

TECHNICAL SPECIFICATIONS

• Supply voltage: 220-240 V, ~50-60 Hz
• Rated input power: 2200 W
• Maximum water capacity: 1,7 l

RECYCLING
To prevent possible damage to the environment or harm to the health of people by uncontrolled waste disposal, after service life expiration of the unit or the batteries (if included), do not discard them with usual household waste, deliver the unit and the batteries to specialized centers for further recycling. The waste generated during the disposal of the unit is subject to mandatory collection and consequent disposal in the prescribed manner. For further information about recycling of this product apply to a local municipal administration, a disposal service or to the shop where you purchased this product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>