SBONNI P106, P108 Double Direction Exhaust Fan User Manual
- September 5, 2024
- SBONNI
Table of Contents
SBONNI P106, P108 Double Direction Exhaust Fan User Manual
PRODUCT SPECIFICATIONS FEATURES
Exhaust Fan P106
Model: P106 100mm(4″)
V/Hz: 230V,50Hz(UK) 120V,60Hz(US)
Two-Way Linkage: Air inlet & outlet
Air Volume: Air inlet 95m³/h Air outlet 130m³/h
Noise: Powerful gear ≤32dB Silent gear ≤28dB
Two-Speed Airflow Adjustment: Super silent & powerful type air volume
Control Mode : Remote control
Exhaust Fan P108
Model: P108 100mm(4″)
V/Hz: 230V,50Hz(UK) 120V,60Hz(US)
Two-Way Linkage: Air inlet & outlet
Air Volume : Air inlet 95m³/h Air outlet 130m³/h
Noise: Powerful gear ≤32dB Silent gear ≤28dB
Two-Speed Airflow Adjustment: Super silent & powerful type air volume
Control Mode : Remote control
LED Light : White/Warm white/Strong light
Note:
- There will be a 1-2 second delay when the machine starts up.
- Remote control and exhaust fan one-to-one has been paired.
- Our products come with a memory function that defaults to the last step of the last operation every time you turn on the machine.
FEATURES
-
PC-ABS Material
The fan is made of high strength and durable PC-ABS material, makes it high efficiency working and long working life -
Double Direction Ventilation Fan
Our bathroom fan is a window exhaust fan with two-way linkage (with remote control).
Window type exhaust fan with exhaust air and intake can promote air circulation, bring away muddy air and maintain fresh room air. -
Two-Speed Airflow Adjustment
You can choose the Super Silent and powerful type air volume according to your needs. -
LED Light
The fan comes with a three colors energy-saving LED light that perfectly illuminates your home. (This feature is only available on the P108 model).
INSTALLATION METHODS
Wall-Mounted Installation (A: EVA Foam Adhesive Installation)
A. Drill a hole in the wall.
B. Insert the bottom of the exhaust fan into the hole to complete the installation (can be secured with glue or placed with 2 pieces of self- adhesive EVA foam).
Wall-Mounted Installation (B: Screw Installation Method)
A. Align the screwdriver with the opening, gently pry open,
inserting it about 1.6 inch (4cm) 40mm.
B. Apply quick and forceful forward pressure.
C. Insert the corrosion-resistant base into the installation hole, and mark the screw positions for installation
D. Drill screw holes at the marked positions and insert plastic plugs.
E. Install the base into the installation hole and tighten the screws.
F. Cover with the panel, and installation is complete.
Glass Window Installation Method
A. Drill a hole in the glass
B . Fit the gasket around the edge of the glass hole.
C. Insert the unit into the glass window installation hole, and installation is complete (it is recommended to use glass adhesive for better unit stability).
Ceiling-Mounted Installation
A. If the ceiling is a thin aluminum ceiling or plasterboard that cannot support the weight of the unit, it is recommended to use a wooden board for added support.
B. Drill holes in the ceiling
C. Use screws to secure the unit to the ceiling.
D. Connect the flexible hose to the bottom, cover with the panel, and installation is complete.
CAUTIONS
- Don’t install the fan into the place where it would be exposed to water splash, poisonous gas, excess vapour or high temperature.
- Avoid the air back into room through the open flues or other open-flames appliances.
- Allows use of neutral detergents to remove grease. Never use water above 60℃, petroleum, benzene, thinner or any other such organic solvent to clean. Don’t allow water to enter into motor.
- If the supply cord damage, must be replaced by staff specialist from maintenance department of manufacturer or specialized electrical personnel, using specialized cord or from manufacturer or maintenance department.
- Please keep equipment away from children.
MAINTENANCE
- Switch off power first.
- Remove the fan cover, blade, and other parts, wash them in water using a brush. Use a soft cloth to wipe off grease with a neutral cleanser. Never use water hotter than 60℃, petrol, benzene, thinner, or any other organic solvent to clean. Do not allow water to enter the motor.
- Dry the cleaned parts naturally or with a soft dry cloth. Then reassemble them.
- Within the warranty period, and under normal operation, any malfunction caused by the manufacturer can be repaired or replaced free of charge
WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE : This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Thank you purchase of our exhaust fan. Please read the manual carefully before use and keep it properly for future reference.
If you have any problems about our exhaust fan, please contact us without hesitation. We will solve your problems as soon as possible.
Email:w16675365667@outlook.com
FCC-ID: 2BAY6-P-SERIES
MADE IN CHINA