NEEWER 5d 2 Professional Photography Kit Instruction Manual
- June 8, 2024
- NEEWER
Table of Contents
NEEWER 5d 2 Professional Photography Kit
Product list
- Matte box (diameter 82mm) x 1
- L-type wrench x 1
- Counterweight 1kg x 1
- Follow focus F0 x 1
- Gear Belt (suit the lens blew 100mm) x 1
- Rubber plug x 12
- 40cm tube x 2
- 20cm tube x 2
- Z type bracket x 1
- 30cm tube Mount Baseplate x 1
- Shoulder pad x 1
- Front Handle Grips Clamp Mount x 1
- C type bracket x 1
- The handle x 1
- Conduit connector x 2
Assembly instructions
- Put ctype bracket in to two aluminum tube of ® 30cm tube Mount Baseplate to the picture.
- Put type bracket into Al.
- Put follow focus f0 into A2.
- Put Front Handle Grips Clamp Mount into A3.
- Put 40cm tube into A4.
- Put the Shoulder pad on the 4Ocm tube, adjust it to a position that is suitable for the human’s body.
- Put the counterweight on the 40 cm tube, behind the Shoulder pad, and then twist the screw.
- Put a Matte box on the A7.
- Put two 20cm tubes on 13 type brackets.
- Put ⑭ the handle on the ⑧ 20cmtube, adjust it to a suitable distance and then lock it.
- A. Install the camera: first take off the quick-release plate, and put the camera on the quick-release plate. As shown.
- B. Put ⑤ Gear Belt on the lens and lock.
- Put A 11 on the Mount Baseplate of 30cm tube Mount Baseplate, the camera lens to matte box, adjust it to a fit position, tighten the button.
- According to the position of gear belt on lens to move the follow focus, match the two gears on follow focus and gear belt, then fixed it.
- Put ⑥ Rubber plug on the 30cm tube and 40cm tube.
- Tighten all the screw, Avoid the separation and loosening of the parts.
Pay attention to
Please Note the Correct Installation Method of the Blue Screw Knob:It should be connected on the thinner side not the thicker side
Using sketch map
Read User Manual Online (PDF format)
Loading......