SAFEGUARD Dryzone Anti-Mould Silicone Sealant Owner’s Manual

: June 8, 2024
: SAFEGUARD

Table of Contents

SAFEGUARD Dryzone Anti-Mould Silicone Sealant
Product Description
Benefits
Properties
Application Information
Other Information
NEED HELP
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SAFEGUARD Dryzone Anti-Mould Silicone Sealant

Product Description

Dryzone® Anti-Mould Silicone Sealant is a single component, moisture curing silicone sealant The sealant has excellent adhesion and is mould resistant, ensuring a clean, hygienic surface is maintained.

Accreditation
CE EN 15651-3, class XS1, EMICODE EC1-PLUS

Benefits

Ideal for use in wet areas such as bathrooms
Strong, long-lasting bond and fast curing
Excellent adhesion to tiles
Low odour
Low VOC
Long-lasting resistance to mould

Properties

Appearance	White
Density	1.02 g/cm3
Size(s) & Packaging	310 ml cartridge
Coverage	One bath, two showers and two sinks

Application temperature

|

5 – 30 °C

Skin Formation at 23°C and 50% RH|

25 minutes

Application Information

Preparation
All surfaces must be clean, dry and free from dust, grease and loose materials. Non-porous surfaces should be cleaned with a solvent and a clean, dry cloth. Remove all previous coatings such as paints and varnishes and ensure all previous sealant is removed thoroughly before starting. Prime surface if necessary Ensure a test area is carried out prior to full application to ensure compatibility with the surface to be treated.

Application
Cut the top of the screw thread off the cartridge and screw on the nozzle. Cut nozzle to correct diameter for joint size. Use a mastic gun to apply the sealant into the joint, ensuring good contact with surfaces. For deep joints, use a backing rod to ensure good joint formation. Curing occurs through reaction with water vapour in the air and visible light. In bathrooms without natural light, curing can be aided by leaving on the lights for 24 – 48 hours after application. The curing time may be extended at lower temperatures, lower humidity, increased joint thickness and with lack of ventilation.

Dryzone® Anti-Mould Silicone Sealant is not suitable for natural stones such as marble, granite or quartzite as it can cause staining. It is not suitable for use in aquariums, swimming pools or food contact areas

Other Information

Dryzone® Anti-Mould Silicone Sealant does not have a hazard classification. For more information see the Safety Datasheet (SDS).
Dryzone® Anti-Mould Silicone Sealant is produced in accordance with ISO 9001 and ISO 14001 quality and environmental management systems.

Information given is in good faith based on experience and usage, however all recommendations are made without warranty or guarantee, since the conditions of use are beyond our control. All goods are sold in accordance with our Conditions of Sale, copies of which are available on request. Customers are advised that products, techniques and codes of practice are under constant review and changes occur without notice; please ensure you have the latest updated information.