HOFTRONIC 387386 Milano Led Porch Lights Non Dimmable User Manual

: June 8, 2024
: HOFTRONIC

Table of Contents

INSTALLATION MANUAL
FREQUENTLY ASKED QUESTIONS
MOUNTING
FUNCTIONAL CHARACTERISTICS
ENVIRONMENTAL PROTECTION
COMMENTS / GUIDELINES
DECLARATION OF CONFORMITY
customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HOFTRONIC 387386 Milano Led Porch Lights Non Dimmable User Manual

INSTALLATION MANUAL

Please read this manual carefully before installing and using the downlights. Do this for your own safety and to prevent damage of the product. This manual is applicable to the recessed downlights. The kit is delivered ready for use with the amount of downlights you selected, five meters cables, non-dimmable driver and connector.

First check whether all the parts are in the box and test the kit before installing it permanently.
Drill the holes with a saw size of 28 mm to the desired position. Position the cables of the LED recessed spotlights at the desired location.
Place the LED recessed spots in the drill hole so that the two springs touch the material. Push both springs in succession against the downlight and put the downlight in place.
Connect the LED driver to the connector (connect red to blue, connect black to brown), note that each connector has 6 ports.
Switch the power group off, then connect the transformer to 230V (INPUT) N = cable blue and L= cable brown. Connect the INPUT of the transformer with an on/off switch (fixed mains current ).

FREQUENTLY ASKED QUESTIONS

How many spots can I connect at least?

INTENDED USE / APPLICATION

Product designed for the use in households and for other similar general applications.

MOUNTING

Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock.
Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.

FUNCTIONAL CHARACTERISTICS

The product can be used indoors and outdoors.

USAGE GUIDELINES / MAINTENANCE

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemic l detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Nondemountable product. Not suitable for independent repairs.

ENVIRONMENTAL PROTECTION

Keep your environment clean. Segregation of post-packaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to th seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

COMMENTS / GUIDELINES

Failure to follow these instructions may result in e.g. fire, burns, electrical shock,
physical injury and other material and non-material damage. For more information about Hoftronic products visit www.hoftronic.com. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the right to make changes in the manual – the current version can be downloaded at www.hoftronic.com.

DECLARATION OF CONFORMITY

DOCUMENTATION

This product has been manufactured and supplied in compliance with all relevant regulations and directives applicable to all member states of the European Union. The product complies with all applicable regulations and rules in the country of sale.

Formal documentation such as the declaration of conformity, the safety data sheet and the product test report is available upon request

CE DECLARATION

The product complies with the following directives:
LVD: 2014/35/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) is available upon request.