ABUS JC540 Mina Door Stop/Damper Instruction Manual

: June 8, 2024
: ABUS

Table of Contents

JC540 Mina Door Stop/Damper
Possible uses
Maintenance and life cycle
Disposal
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JC540# Mina

JC540 Mina Door Stop/Damper

CAUTION:
Please read this guide carefully before installation and use. Keep these instructions and provide all users with instruction on how to use it.
Failure to observe these instructions can lead to injury!

Possible uses

For use by adults only!

Certified according EN 16654:2015.
Suitable for attachment to the main closing edge (handle side) on all single-action/sliding doors made of wood and metal with a door leaf thickness of 30-50 mm.
Another device is required to protect the secondary closing edge (hinge side) of the door..
Smoke and fire protection doors must never be wedged open with door stoppers!

The door stopper reduces the risk of injury from fingers being crushed on the closing edge.
Check regularly that the attached door stopper holds securely to the door. Remove the door stopper when not in use and overnight so that the door can be closed to reduce the spread of smoke and fire in the event of a fire. The product may only be used for its intended purpose. Any modification to the product is prohibited.
The product does not replace any duties of supervision. Always supervise children! Keep packaging material away from children: Danger of suffocation! Do not use as a toy!

Maintenance and life cycle

Clean the door stopper with soapy water or a damp cloth. Do not use harsh cleaning agents or chemicals. The mechanism should be replaced if any part is missing, broken or torn off.

Disposal

At the end of its service life, dispose of the product in accordance with the applicable legal requirements. Please contact the local authority responsible for disposal if you have any queries. Dispose of the packaging according to type. Separate the cardboard, foil and plastic elements for recycling.

Warranty

ABUS products are designed, manufactured and tested in accordance with applicable regulations with great care.
The warranty exclusively covers faults that are caused by material or manufacturing defects. If a material or manufacturing defect can be proven, the product will be repaired or replaced at the discretion of the warrantor.
In such cases, the warranty ends with the termination of the original warranty period. Any further claims are expressly excluded.
ABUS assumes no liability for defects or damage that has been caused by external influences (e.g. transport, external forces), improper use, normal wear and tear or non-compliance with this operating and installation instructions document. If a warranty claim is asserted, the product must be returned with the original receipt with date of purchase and a brief written description of the fault.
Subject to technical alterations. No liability for mistakes and printing errors.

ABUS (UK) Ltd.
Unit 8 Third Way Corner, Avonmouth
Bristol BS11 9HL, UK
Tel.: +44 117 204 70 00
info@abus-uk.com

www.abus.com
© ABUS 2022
D 58292 Wetter | Germany
T390490 | V2 | F22