ineLs WSB3-40, WSB3-40H Wall Switch Button Instruction Manual
- June 8, 2024
- inELS
Table of Contents
WSB3-40, WSB3-40H
Wall switch button, 4 buttons
Instruction Manual
WSB3-40: 8595188132336
WSB3-40H: 8595188133043
EAN code
WSB3-40, WSB3-40H Wall Switch Button
| Technical parameters | WSB3-40 | WSB3-40H |
|---|
Inputs
Temperature measuring:| YES, built-in temperature sensor
Scope and accuracy of
temp. measuring:| 0 to +55 °C ; 0.3 °C from the range
Number of control buttons:| 4
Humidity measurement:| NO| YES
Humidity measurement range:| –| 0 to 99 % Relative humidity
Humidity measurement accurancy:| –| ± 3 % Relative humidity
Inputs:| 2x AIN/DIN
External temperature sensor:| YES, the connection between
AIN1/DIN1 and AIN2/DIN2
Type of external sensor:| TC/TZ
Temp. measurement range:| -20 °C to +120 °C
Temp. measurement
accuracy:| 0.5 °C from range
Outputs
Indication:| two-colored LED (red, green)
Number of LEDs:| 2
Communication
Installation BUS:| BUS
Power supply
Supply voltage/tolerance:| 27 V DC, -20/+10 %
Dissipated power:| max. 0.5 W
Rated current:| 25 mA (at 27 V DC), from BUS
Connection
Terminals:| 0.5 – 1 mm2
Operating conditions
Operating temperature:| -20 to +55 °C
Storing temperature:| -30 to +70 °C
Protection degree:| IP20
Overvoltage category:| II.
Pollution degree:| 2
Operation position:| any
Installation:| into installation box
Dimensions and weight
Dimensions
– plastic:
– metal, glass, wood, granite:| 85.6 x 85.6 x 42 mm
94 x 94 x 36 mm
Weight:| 55 g (without frame)
-
The choice is made in iDM3 for each unit separately.
-
Wall mounted controllers with upstroke control WSB3-40 and WSB3-40H are the basic and most popular feature (control) of the iNELS system.
-
Built-in micro-switch with low upstroke off ers elegant and pleasant control.
-
Controllers WSB3-40 and WSB3-40H are supplied with 4-channels.
-
Two-coloured indication LEDs located in each controller, can signal the status of controlled appliances or the status of any sensor or actuator in the system.
-
Wall buttons in WSB3 series are compatible with both types of frames LOGUS 90 (85.6×85.6 or 94×94 mm), therefore you can combine them with double and triple frames and classic products of the series.
-
Each controller is equipped with a temperature sensor. It is also equipped with two analog/digital inputs (AIN/DIN), which can be used to connect two potentialless contacts or one external temperature sensor TC/TZ (e.g. for measuring fl oor temperature).
-
Compared to standard wall buttons WSB3-20 and WSB3-20H are more flexible and multifunctional. You can for example controll appliances by short and long push of the button (e.g.: dimming, shutter control, scenes).
-
Each button can control any appliance in the system and can use a variety of centralized or time controlled features. Accordingly, the customer can choose the simplicity/complexity of the operation. The big advantage is the possibility to change the method of control by only making software modifi cations without physical interventions into the structure of the building.
-
Each button (fold) can have diff erent functional modes beside lighting control:
a) Classic wall-switch:
– upper button ON, bottom button OFF
b) Button controller (impulse relay):
– first press ON, second press OFF
c) Dimmer:
– short press – ON/OFF
d) Time switch:
– ON after press, automatically OFF after set time
e) Setting light scenes – for example: for watching TV:
– shutters down
– main light 30% intensity
– wall-lamps 50% intensity -
WSB3 in LOGUS 90 design is designed for mounting into an installation box.
-
Connection
