OPT7 LIGHTING AuraPro Manual Halo-Mustang Installation Guide
- June 8, 2024
- OPT7 LIGHTING
Table of Contents
OPT7 LIGHTING AuraPro Manual Halo-Mustang
COMPONENTS
INSTALLATION
-
Open the hood.
-
Wrap the LED strip into a circle shape and firmly press into place inside of the intake hole to secure.
AND/OR
Attach the strip as pictured as an alternate method of install. -
Remove the plastic covers on the right and left side of the engine bay.
-
Run the wires along the front brace and connect to the control box.
-
Connect the positive wire to a constant (always on) or accessory (only when the car is on) circuit in the fuse box by using an included fuse tap.
-
Connect the negative wire to a ground source, such as the one circled in the picture.
-
Test for function.
INSTALLATION
OPTION A
OPTION B
OPTIONAL: 2 x 12” Strips can be used to enhance your front grille or use as spares.
* IMPORTANT: The LED connectors are not waterproof. You will need to use
HEAT SHRINK TUBE (not included) or ELECTRICAL TAPE around the LED connectors
to ensure the longevity of the lighting kit.
WARNING: Please ensure that the led strips/control box/wiring all are mounted in areas of the engine bay that will not exceed 85C or 185F.
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
OPT7 CONNECT APP
- Colors
- Modes
- Door Assist
- Support
- Ability to control up to 4 devices at once
QR CODE TO DOWNLOAD
Download the free “OPT7 CONNECT” App
- App iOS (12+) available on App Store
- Android (6 +) available on Google Play
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance. Modified installations or installation recommendations not specified by OPT7 Lighting will void product warranty.