OPT7 LIGHTING AURA LED Double Row Interior Lighting Kit Installation Guide
- June 9, 2024
- OPT7 LIGHTING
Table of Contents
AURA™
DOUBLE ROW
INTERIOR
INSTALLATION GUIDE
MAIN COMPONENTS
INSTALLATION
STEP 1
Decide where to locate the light strips and ensure wiring has enough length
for control box to be installed in desired location.
As shown below, connect all light strips to the control box with the included
extension cables.
WARNING
1. Connecting to more than 10 AMP will override the kit and cause early
failure, ensure it is 10AMPs or less!!
2. Please ensure that the LED bars or strips/control box/wiring all are
mounted in areas where will not exceed 85℃ or 185 ℉
.Once connected, plug the control box Cigarette Power Adapter into an
available 12 volt charging port.
STEP 2
Secure Control box in desired location with Velcro or zip ties.
- CONTROL BOX NOT WATERPROOF Ensure the control box is safely and securely hidden from exposing elements of moisture.
STEP 3
Use the zip ties to tie all wiring away from all moving components.
STEP 4 Using the included E-Z
Remote, select your desired color or pattern.
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to
https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
OPTIONAL UPGRADE Upgrade your Aura Original Control Box to the Aura Pro
Bluetooth Control Box. All new AURA Pro Bluetooth is App enabled by a
smartphone
controller (iOS & Android Compatible).
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time.
OPT7 Lighting assumes no responsibility for improper installation. If you are
unfamiliar with your vehicle or inexperienced with aftermarket upgrades,
please seek professional assistance.
OPT7 recommends installation for safety and guidance. Modified installations or
installation recommendations not specified by
OPT7 Lighting will void product warranty.