i safe MOBILE IS930.RG Tablet Instruction Manual
- June 8, 2024
- i safe MOBILE
Table of Contents
Tablet Instruction Manual
IS930.RG
MODEL M93A01
INFORMATION CONCERNING SAR CERTIFICATION
(SPECIFIC ABSORBATION RATE)
Maximum SAR for this model and conditions under which it was recorded:
SAR (body – worn)
1 .53 W/kg
NB WARNING
CAUTION
-
Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss .
-
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE . DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS .
-
Operation temperature: -10°C …+55°C (EN/IEC 62368-1) .
-
The device shall only be connected via accessory authorised by i.safe MOBILE GmbH .
-
AC Adapter:
-
Approved external adapter model ICP12-050-2000B (Input: AC100-240V 50/60Hz 0 .3A;
Output: 5VDC, 2A) or other approved external AC/DC adapter which complies with the requirements of LPS (Limited Power Source) and has output rated 5VDC/2A . -
Adapter shall be installed near the equipment and shall be easily accessible .
-
The plug is considered independent of the adapter .
-
The device complies with RF specifications when the device used at 0 .5 cm from your body .
-
The i.safe MOBILE GmbH hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU . This information has to be presented in such a way that the user can readily understand it . Typically, this will necessitate translation into every local language (required by national consumer laws) of the markets where the equipment is intended to be sold. Illustrations, pictograms and using international abbreviations for country names may help reduce the need for translation.
EU/UK-DECLARATION OF CONFORMITY
EU/UK – Declaration of Conformity
according to directive 2014/53/EU, SI 2017 No. 1206, 2011/65/EU (2015/863/EU),
SI 2012 No. 3032
The company i.safe MOBILE GmbH declares under its sole responsibility that the
product to which this declaration relates is in accordance with the provisions
of the following data, directives and standards:
Name & address of the manufacturer in the EU| i.safe MOBILE GmbH
i_Park Tauberfranken 10
97922 Lauda – Koenigshofen
Germany
---|---
Description of the device| Tablet
type : IS930.RG
model : M93A01
Conformity statement 2014/53/EU issued by
Applied harmonized standards| PHOENIX TESTLAB GmbH
Königswinkel 10
32825 Blomberg, Germany
identification number / Kenn-Nummer: 0700
EN 62368-1:2014/A11:2017; EN 50332-1:2013;
EN 50332-2:2013; EN 50566:2017;
EN 62209-2:2010+A1:2019; EN 62479:2010;
EN 50663:2017; EN IEC 62311:2020;
ETSI EN 301 489-1 V2.2.3;
ETSI EN 301 489-3 V2.1.1;
ETSI EN 301 489-17 V3.2.4;
ETSI EN 301 489-19 V2.1.1;
Draft ETSI EN 301 489-52 V1.1.0;
EN 55032:2015+A11:2020;
EN 55035:2017+A11:2020;
ETSI EN 301 511 V12.5.1;
ETSI EN 301 908-1 V13.1.1;
ETSI EN 301 908-2 V13.1.1;
ETSI EN 301 908-13 V13.1.1;
ETSI EN 300 328 V2.2.2;
ETSI EN 301 893 V2.1.1;
ETSI EN 300 440 V2.2.1;
ETSI EN 300 330 V2.1.1;
ETSI EN 303 413 V1.1.1
Conformity statement SI 2017 No. 1206 issuedby Applied standards| MiCOM Labs
575 Boulder Court
Pleasonton
California 94566, USA
EN 62209-2:2010+A1:2019; EN 50566:2017;
EN 50360:2017; EN 62479:2010;
EN 50663:2017; EN IEC 62311:2020;
EN 62368-1:2014+A11:2017; EN 50332-1:2013;
EN 50332-2:2013; EN 301 489-1 V2.2.3;
EN 301 489-17 V3.2.4; EN 301 489-19 V2.1.1;
EN 301 489-3 V2.1.1;
Draft EN 301 489-52 V1.1.0;
EN 55032:2015+A11:2020;
EN 55035:2017+A11:2020;
EN 301 511 V12.5.1; EN 301 908-1 V13.1.1;
EN 301 908-2 V13.1.1; EN 301 908-13 V13.1.1;
EN 300 328 V2.2.2; EN 301 893 V2.1.1;
EN 303 413 V1.1.1; EN 300 330 V2.1.1;
EN 300 440 V2.2.1
Conformity statement 2015/863/EU amending
2011/65/EU issued by Applied harmonized standards| SGS-CSTC Standards
Technical Services Co.,
Ltd. Guangzhou Branch
No. 198 Kezhu Road, Scientech Park,
Guangzhou Economic & Technology
Development District
Guangzhou, Guangdong Province, 510663 China
IEC 62321-2: 2013; IEC 62321-1: 2013;
IEC 62321-3-1: 2013; IEC 62321-5: 2013;
IEC 62321-4: 2013 + A1: 2017;
IEC 62321-7-1: 2015;
IEC 62321-7-2: 2017 & ISO 17075-1: 2017;
IEC 62321-6: 2015; IEC 62321-8: 2017
Conformity statement SI 2012 No. 3032 issued
by Applied standards| SGS-CSTC Standards Technical Services Co.,
Ltd. Guangzhou Branch
No. 198 Kezhu Road, Scientech Park,
Guangzhou Economic & Technology
Development District
Guangzhou, Guangdong Province, 510663
China
IEC 62321-2: 2013; IEC 62321-1:2013;
IEC 62321-3-1:2013; IEC 62321-8:2017;
IEC 62321-4:2013+A1:2017; IEC 62321-5:2013;
IEC 62321-7-1:2015; IEC 62321-7-2:2017;
ISO 17075-1:2017; IEC 62321-6:2015
CE/UKCA Marking|
Document No . 1042MM11REV01
Version: 2022-09-29
(c) 2022 i.safe MOBILE GmbH
i .safe MOBILE GmbH
i_Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany
Tel . +49 9343 60148-0
info@isafe-mobile.com
www.isafe-mobile.com