XING 2ADK3XY-PR010 Wireless Earbuds User Manual
- June 8, 2024
Table of Contents
2ADK3XY-PR010 Wireless Earbuds
User Manual
Function
- Micro-USB Input Port
- LED indicator
- Charging Pad Surface
What include
1 x Wireless Charging Pad
1 x USB to Micro-USB Charging Cable
1 x Instruction Manual
Specifications
Input power: 5V/1.5A
Wireless Output: 5W
Instructions
1.Use A Certified USB Plug Adapter:
- Connect the provided Micro-USB cable to the USB plug adapter.
- Connect the Micro-USB tip to the input port on the charging pad.
- Insert corresponding charging cable into the Charging Pad USB port.
2.Charging Mobile Devices:
Ensure that your phone or tablet supports wireless charging.
- LED indicator(2) will flash BLUE & RED 2 times, then glow RED to indicate the wireless charger is in standby mode and ready to begin charging.
- Place the wireless charging supported mobile device on the wireless charging surface(3), LED will glow BLUE when device is charging.
- Phone will begin to charge automatically.
- When completely charged, remove the device from the charging pad.
To charge devices, use only the accessory cable or the cable included with
your own device by the manufacturer.
Note: When wireless charging, if the LED indicator flashes BLUE,the
device is either NOT a wireless charging device or there is an object between
the the device and charging surface interfering with the charging process.
FCC WARNING**
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>