Shenzhen He Xing Sheng Smart Link Technology WPC05-1MJNB Watch Magnetic Charging Cable User Manual

Shenzhen He Xing Sheng Smart Link Technology WPC05-1MJNB Watch Magnetic

Charging Cable

Watch Magnetic Charging Cable

 INTRODUCTION

This product is a high-performance wireless charger. This product is suitable for apple watch, Connect the wireless charger to a power charger, and then you can charge your apple watch by put it on the charger directly. F

FEATURES

• Transmitting terminal input: 5V/1A
• Transmitting terminal output: 2.5W
• Intelligent green indicator to show working condition
• Compliant with MFI, CE, FCC standards
• It is light, smart and convenient to use

SPECIFICATIONS

PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:

• Main unit×1
• User Manual×1

OPERATION

Operation Procedures

1.  Connect charger to the power adapter,
2.  Place your apple watch on the charger, then watch start charge，
3. Please take out the device after it is fully charged.

Operation Notes

1. For optimum performance, please use charger according to this user manual.
2. Please connect the wireless charger to a power adapter which output 5V/1A,
3. Please unplug the charger after using.
4. Do not use the charger with an electronic product which is not in conformity with the specifications, so as to avoid any problem caused by specification mismatching.
5. It’s normal that charger will be a little overheated in the use process.
6. When the charger stops working under some accidents, you need to check whether the device is compatible with this charger.
7.  Do not let the wireless charger close to fire, such as stove, candles and etc.
8. Do not let the wireless charger soak into liquid, such as swimming pool, bathtub, etc.
9. Do not wash the wireless charger with corrosive cleaner.
10. If the wireless charger cannot work properly, please contact the store or distributor in your area.

CONNECTION DIAGRAM

1. Placement diagram
2. 2. Adapter for supplying. Adapters support 5V1A and above, will be fine.

Dos and Don’ts

1. Don’t use the Charger or the USB-C power adapter in wet locations, such as near a sink, bathtub, or shower stall, and don’t connect or disconnect them with wet hands.

2. Disconnect the Charger, its cable, and the power adapter if any of the following conditions exists: You want to clean the Charger or the power adapter; the power cord or plug becomes frayed or otherwise damaged; the Charger, its cable, or the power adapter 5. is exposed to rain, excessive moisture, or liquid; or the Charger, its cable, or the power adapter has been dropped, damaged, or you suspect that service or repair is required.

3. When you use the USB power adapter, make sure the cable is
   fully inserted into the power adapter before you plug the adapter
   into a power outlet.

4. When using the Charger, remove metallic cases and avoid
   placing metallic foreign objects on it (for example, keys, coins, batteries, or jewelry), as they may interfere with charging or
   become warm enough to cause discomfort or injury if your skin
   comes into contact with them.

Prolonged Heat Exposure

The Charger and its cable comply with the applicable surface-temperature standards and limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950-1) and the Standard for Safety of Audio/Video, Information and Communication Technology Equipment (IEC 62368-1). However, even within these limits, sustained contact with warm surfaces for long periods of time may cause discomfort or injury. Use common sense to avoid situations where your skin is in contact with the Charger, the power adapter, or devices on the Charger when it’s operating or connected to a power source for long periods of time. For example, don’t sleep on the Charger, the power adapter, or devices on the Charger, or place them under a blanket, pillow, or your body, when it’s connected to a power source. It’s important to keep the Charger and the power adapter in a well-ventilated area when in use or charging. Take special care if you have a physical condition that affects your ability to detect heat against the body.

Repairing

Don’t attempt to repair the Charger yourself. Disassembling the Charger may damage it or cause injury to you. If the Charger is damaged or malfunctions, discontinue use and contact Apple or an Apple Authorized Service Provider.

Exposure to Radio Frequency Energy

The radiated output power of the Charger meets applicable radio frequency exposure limits. The Charger should be operated with a minimum separation distance of 20 cm (8 inches) between the Charger, or any devices on the Charger, and a person’s body.

Medical Device Interference

The Charger contains magnets and radios that emit electromagnetic fields. These electromagnetic fields may interfere with medical devices, such as pacemakers and defibrillators. Consult your physician and medical device manufacturer for information specific to your medical device and whether you need to maintain a safe distance of separation between your medical device and the Charger. If you suspect the Charger is interfering with your medical device, stop using the Charger.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>