StarTech com SV231TDPU34K 2 Port Triple Monitor DisplayPort KVM Switch User Guide
- June 8, 2024
- StarTech com
Table of Contents
Quick-Start Guide
2-Port Triple/Quad Monitor KVM Switch – DisplayPort™ – 4K 60Hz
SV231TDPU34K 2 Port Triple Monitor DisplayPort KVM Switch
Product Diagram (SV231TDPU34K/SV231QDPU34K)
Front View
Rear View
| Port| Function
---|---|---
1| Console USB HID Ports| Connect up to 4 USB Human Interface Devices (HID)
(e.g. Keyboard, Mouse, Trackpad, Number Keypad, Drawing Tablet)
2| Console USB Hub Ports| • Connect up to 2 SuperSpeed USB 5Gbps (USB 3.2 Gen
- Peripheral Devices
3| Port Selection LED Indicators| • Green: PC 1 and/or PC 2 connected (power on)
• Red: PC 1 or PC 2 selected (power on)
4| Port Selection Button| • Press the Port Selection Button to select PC 1 or 2
5| Console DisplayPort Output Ports| • (SV231TDPU34K) Connect to three Console DisplayPort Displays
• (SV231QDPU34K) Connect to four Console DisplayPort Displays
6| PC 2 DisplayPort Input Ports| • (SV231TDPU34K) Connect to three DisplayPort Ports on PC 2
• (SV231QDPU34K) Connect to four DisplayPort Ports on PC 2
7| PC 1 DisplayPort Input Ports| • (SV231TDPU34K) Connect to three DisplayPort Ports on PC 1
• (SV231QDPU34K) Connect to four DisplayPort Ports on PC 1
8| Power Input Port| • Connect a DC 12V Power Source to power the KVM Switch
9| Console Audio Port| • Connect an Audio Device (Stereo Speakers or Microphone)
10| PC 2 USB Port| • Connect to a SuperSpeed USB 5Gbps (USB 3.2 Gen 1) Port on PC 2
11| PC 2 Audio Port| • Connect to an Audio Port (for Stereo Speakers or a Microphone) on PC 2
12| PC 1 USB Port| • Connect to a SuperSpeed USB 5Gbps (USB 3.2 Gen 1) Port on PC 1
13| PC 1 Audio Port| • Connect to an Audio Port (for Stereo Speakers or a Microphone) on PC 2
Requirements
For the latest requirements and to view detailed instructions on all product
functionality in a full user manual, please visit:
www.startech.com/SV231TDPU34K
www.startech.com/SV231QDPU34K
Source PCs
- Computers (DisplayPort enabled) x 2
- DisplayPort Cables x 6 (SV231TDPU34K), 8 (SV231QDPU34K)
- SuperSpeed USB 5Gbps (USB 3.2 Gen 1) Cables (Type-A Male to Type-B Male) x 2
- (Optional) 3.5 mm Audio Cables (Male to Male) x 2
Console
- DisplayPort Displays x 3 (SV231TDPU34K), 4 (SV231QDPU34K)
- DisplayPort Cables x 3 (SV231TDPU34K), 4 (SV231QDPU34K)
- USB Keyboard x 1
- USB Mouse x 1
- (Optional) Audio Device (e.g. Headphones, Microphone, etc.) x 1
- (Optional) USB HID Devices x 2
- (Optional) SuperSpeed USB 5Gbps (USB 3.2 Gen 1) Peripheral Devices x 2
Installation
Connect the Console
- Power off the DisplayPort Display and any Peripherals before connecting to the KVM Switch.
- Connect 3 (SV231TDPU34K) or 4 (SV231QDPU34K) DisplayPort Displays to the Console DisplayPort Output Ports on the rear of the KVM Switch.
- Connect a USB Keyboard and a USB Mouse to the Console USB HID Ports on the rear of the KVM Switch.
- (Optional) Connect an additional USB HID Device to the remaining Console USB HID Port on the front of the KVM Switch.
- (Optional) Connect the Audio Device to the Console Audio Port on the KVM Switch.
- (Optional) Connect up to two SuperSpeed USB 5Gbps (USB 3.2 Gen 1) Peripheral Devices to the Console USB Hub Ports located on the front and rear of the KVM Switch.
Connect the PCs
-
Power off the Computer and any Peripherals before connecting to the KVM Switch.
-
Connect 3 (SV231TDPU34K) or 4 (SV231QDPU34K) DisplayPort Cables from the DisplayPort Ports on the Computer to the PC 1 DisplayPort Input Ports on the rear of the KVM Switch.
-
Connect a SuperSpeed USB 5Gbps (USB 3.2 Gen 1) Cable (Type-A Male to Type-B Male) from the USB-A Port on the Computer to the PC 1 USB Port on the rear of the KVM Switch.
Note: A SuperSpeed USB 5Gbps (or better) Cable is recommended for optimal performance. -
(Optional) Connect a 3.5 mm Audio Cable from the Audio Port on the Computer to the corresponding PC 1 Audio Port on the rear of the KVM Switch.
-
Repeat steps 1 to 4 for Source PC 2.
Operation
Power-On Sequence
-
Connect the Universal Power Adapter from a Wall Outlet to the Power Input Port on the KVM Switch. Console USB HID
-
Power on all Peripherals.
-
Select PC 1 and power on the corresponding Computer.
Note: Ensure that the Computer connected to the PC 1 Ports has fully booted to the operating system before proceeding. -
Repeat step 3 for Source PC 2.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class A digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (A)/NMB-3(A)
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of thirdparty companies not related in any way
to StarTech.com. Where they occur these references
are for illustrative purposes only and do not represent an endorsement of a
product or service by StarTech.com , or an
endorsement of the product(s) to which this manual applies by the third-party
company in question. StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and
other protected names and/or symbols contained in this manual and related
documents are the property of their respective holders.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and
StarTech.com USA LLP (or their officers, directors,
employees or agents) for any damages (whether direct or indirect, special,
punitive, incidental, consequential, or otherwise), loss of profits, loss of
business, or any pecuniary loss, arising out of or related to the use of the
product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such
laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Safety Measures
- If product has an exposed circuit board, do not touch the product under power.
StarTech.com
Ltd.
45 Artisans Cres London, Ontario
N5V 5E9
Canada
StarTech.com
LLP
4490 South Hamilton
Road Groveport, Ohio
43125
U.S.A.
Documents / Resources
|
StarTech com SV231TDPU34K 2 Port Triple Monitor DisplayPort KVM
Switch
[pdf] User Guide
SV231TDPU34K, SV231QDPU34K, 2 Port Triple Monitor DisplayPort KVM Switch,
DisplayPort KVM Switch, 2 Port Triple Monitor KVM Switch, KVM Switch, Switch
---|---
References
- holders.fr
- 2-Pt Quad Monitor DisplayPort KVM Switch - KVM Switches | StarTech.com
- 2-Pt Triple Video DisplayPort KVM Switch - KVM Switches | Server Management | StarTech.com