KREAFUNK toCHARGE QI Wireless Charger User Manual
- June 8, 2024
- KREAFUNK
Table of Contents
KREAFUNK toCHARGE QI Wireless Charger
SAFETY AND MAINTENANCE INSTRUCTIONS
This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at: https://kreafunk.com/pages/declaration-of-conformity
OVERVIEW
ON/OFF
CHARGING
BATTERY STATUS
USE
USE WITH USB
TECHNICAL SPEIFICATIONS
- Dimensions: 104x64x11 mm
- Weight: 110g
- Charging time: 1-1.5 hours
- Including USB to USB-C charging cable
- Build in Lithium battery with 5000mAh
- Standard: Qi
- Compatible with Qi enabled devices
- Magnetic attachment function for compatible iPhones
- Anti-slip material
- Charging efficiency: ≥72%
- Charging distance: ≤8 mm
- Output power: Up to 15W
- Input power: 5V / 2.4A – 9V/2A – 12V/1.5A
- Please read this operation manual carefully before use.
- The safety and maintenance instructions in this operation manual should be retained for future reference and must be followed at all times.
- Keep the product away from heat sources such as radiators, heaters or other appliances that produce heat.
- Place the speakers in a stable position to avoid fall and cause damage or personal injury.
- Do not expose the product to direct sunlight for longer periods. High temperatures may shorten the life of the product, destroy the battery and distort certain plastic parts.
- Do not expose the product to extreme cold as it may damage the internal circuit board.
- Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles varies by use and settings.
- Avoid liquids getting into the product.
- Before wiping with a dry cloth to clean the speakers, set the power switch to the of position and unplug the power cord from the power outlet.
- Do not throw with or stamp on the product. This may damage the internal circuit board.
- Do not try to disassemble the product. This must only be done by professional.
- Do not use concentrated chemical products or detergent to clean the product.
- Keep the surface away from sharp things, as these may cause damage to the plastic parts.
- Use 5V / 1A power supplies only. The connection of power supplies higher voltage may lead to severe damage.
- Do not arbitrarily discard or place the lithium battery near fire or intense heat in order to avoid a risk of explosion.
If you do experience any problems with your product please contact the retailer you purchased the product from. The retailer will provide you with guidance and if that does not solve the problem, the retailer will handle claim directly with KREAFUNK.
PRECAUTIONS AND TAKING CARE OF to CHARGE QI
- This product should be used and stored at a temperature between -20° to 40°, and humidity should be less than 85%.
- Be sure not to place the product in high temperature environment during charging to avoid overheating and damage.
- Keep this product in a dry place. Never place or use this product in wet or dirty conditions.
- Never throw this product into a fire.
- Never throw or drop this product as it may cause damage and malfunction.
- Do not place anything between the mobile device being charged and the charging pad.
- Never attempt to alter or disassemble this product. If there is a problem with the product, please contact your seller for further assistance.
- This product is not suitable for use as a travel adapter.
- Keep away from high voltage devices (highest 5V).
- Do not place the product too close to magnetic stripe cards or chip card (credit card, ID card, etc.) to avoid magnetic failure.
- Please keep the distance at least 20 cm between the product and implantable medical devices (pacemakers, implantable cochlear, etc.) to avoid potential interference with the medical device.
- If you need to clean the charger, please make sure it is not connected the AC adaptor.
- Don’t place heavy objects on the product. This may damage the internal circuit board.
- This product is not a toy. Please keep away from children.
- Respective countries have their own laws on the minimum age allowed to operate chargers. Please check with your respective authority for further information.
- All products have gone through a thorough quality assurance inspection. If you find that your device is excessively hot, is emitting odor, is deformed, abraded, cut or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Manufacturer.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
KREAFUNK ApS Klamsagervej 35A, st.
8230 Aabyhoej
Denmark
www.kreafunk.com
info@kreafunk.dk
+45 96 99 00 20
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>