Eva-Dry E-500 Mini Dehumidifier User Manual
- June 9, 2024
- Eva-Dry
Table of Contents
Eva-Dry E-500 Mini Dehumidifier User Manual
E-500 WARRANTY CARD
This is a limited warranty against any manufacturer defects. Normal wear,
abuse or improper use of this product is not covered under this limited
warranty. This warranty will no longer be valid if the product has been
tampered with, taken apart or repaired by anyone other than Eva-Dry. This
limited warranty is the only one to apply to this product, and sets forth all
responsibilities of Eva-Dry, regarding this product. There is no other
warranty, other than describe herein. All Eva-Dry products must be registered
within 30 days of purchase to activate this warranty. WARRANTY IS NON
TRANSFERABLE.
Mail warranty card to the address listed below, scan QR code, or register online at eva-dry.com.
Date Purchased | Fecha de compra Address | City | Phone/ Purchased From | E-mail State | Estado Zip Code | Name |
PRODUCT OPERATION
- View beads in the indicator window of the unit. If the indicator beads are orange, the unit is ready to use. If the indicator beads are green, the unit needs to be renewed.
- Place the unit in the desired location to begin absorbing moisture.
- Monitor indicator beads roughly once a month (4-6 weeks) for color transition from orange to green.
- Once indicator beads turn green, it is time to renew the unit.
- To renew, simply fold down the hidden plug and plug the unit into a power strip (avoid the use of extension cords). Ensure the unit is sitting upright in a room with good airflow for 16 to 18 hours (approximately). Be sure to maintain a minimum of 24”-36” of open space around the unit as the unit will release heat and moisture vapor while plugged in.
- DO NOT hang the unit from hooks while plugged in for renewal. Make sure there are no obstructions or contact with any other objects during the renewal process. DO NOT cover the unit. DO NOT leave the unit plugged in for more than 18 hours.
- Once renewed, indicator beads will return to orange and the unit will be ready to absorb moisture again.
Please visit eva-dry.com for more information on the E-500 dehumidifier and
other quality products from Eva-Dry.
Thank you for choosing and supporting the Eva-Dry brand
PRODUCT INFORMATION
BEFORE YOU RETURN TO STORE
FREQUENTLY ASKED QUESTIONS
Where are the lights?
There are no lights on the unit. The indicator window contains colorchanging
beads that indicate when the unit needs to be renewed.
Does the unit need batteries or need to be plugged in to absorb moisture?
No, the unit absorbs moisture without power, plugs, or batteries. Once you
remove the unit from its packaging it will start absorbing moisture. There is
no ON/OFF switch on the unit. The only time the unit needs to be plugged in is
when it needs to be renewed by drying it out.
When renewing the unit, is it normal for it to warm up?
Yes, when you plug the unit in to dry it out, it will warm up. This is how the
unit is renewed. The heat allows the clear silica gel inside the unit to expel
the moisture it has absorbed. Make sure to is in a well-ventilated area during
renewal and DO NOT cover the unit.
I see water droplets in the indicator window. Is that normal?
Yes. The unit absorbs moisture. That moisture is released during the drying
process. It is normal for released moisture to appear as small water droplets
in the indicator window.
How long does it need to be plugged in to completely dry out?
The time will vary based on atmospheric conditions. We recommend you leave the
unit plugged in overnight. The unit should not be plugged in for more than 18
hours.