Akuvox R20K Wall Mount SIP Video Door Phone with Numeric Keypad Installation Guide

June 9, 2024
Akuvox

Akuvox logo Smart Intercom
Flush-mounting Installation

Quick Guide

R20K Wall Mount SIP Video Door Phone with Numeric Keypad

Unpacking
Before you begin using the device, please check the version you got and ensure that the following items are included in the shipped box:
Mainframe Accessories (Please find in device box) :Akuvox R20K Wall
Mount SIP Video Door Phone with Numeric Keypad

Flush – mounting Accessries:

Akuvox R20K Wall Mount SIP Video Door Phone with Numeric Keypad -
fig

Installation Environment

Indoor and outdoor installation are supported.
If installing the device outdoors, please don’t place device under direct sunlight, it will bring a bad effect or be broken with the high temperature.
If installing the device indoors, please keep device at least 2 meters away from light, and at least 3 meters away from window and door . Akuvox R20K
Wall Mount SIP Video Door Phone with Numeric Keypad -
fig1 Flush-mounting Installation
Step1: Flush-mounting Box Installation

  1. Normal InstallationAkuvox R20K Wall Mount SIP Video Door Phone with Numeric Keypad - fig3
  2. Or you can choose another simple method without fixing ST4x20 screws
    Akuvox R20K Wall Mount SIP Video Door Phone with Numeric Keypad -
fig4
    Step2: Flush-mounting panel installationAkuvox R20K Wall Mount SIP Video
Door Phone with Numeric Keypad - fig5Step3: Back Cover Installation

Make cables go through the back cover, connecting to the corresponding interfaces of the main board. Select a suitable size rubber plug to push all the cables into the back cover. Fix cable locking plate to the back cover with two M2.5×6 screws,
Note: In the case of less than 6 signal cables, use S-size rubber plugs. In the case of 7 to 10 signal cables, use M-size rubber plugs. When there are more than 11 signal cables Please use L-size wiring rubber plug.Akuvox R20K
Wall Mount SIP Video Door Phone with Numeric Keypad -
fig7

Device Wiring

Akuvox R20K Wall Mount SIP Video Door Phone with Numeric Keypad -
fig8

**Notice Information

**

Akuvox R20K firmware contains third-party open source software under the terms of the GNU General Public License(GPL). Akuvox is committed to meeting the requirements of the GNU General Public License (GPL) and will make all required source code available.
The source code of software under the terms of GNU GPL can be downloaded online: http://Avww.akuvox.com/gpl.
Information contained in this document is believed to be accurate and reliable at the time of printing. This document is subject to change without notice, any update to this document can be viewed on Akuvox’ s website: http://Awww.akuvox.com © Copyright 2020 Akuvox Ltd. All rights reserved.
AKUVOX (XIAMEN) NETWORKS CO., LTD.
ADD: 10/F, NO.56 GUANRI ROAD, SOFTWARE PARK II, XIAMEN 361009, CHINA

www.akuvox.com

http://www.akuvox.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals