ION Uber Boom Ultra Audio Water-Resistant Bluetooth Stereo Boombox User Guide

: June 9, 2024
: ION

Table of Contents

Important Safety Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ION Uber Boom Ultra Audio Water-Resistant Bluetooth Stereo Boombox User Guide

IONAUDIO.COI•I/SUPPORT

For articles, videos, phone, web and chat support

IONAUDIO.COM/WARRANTY

For complete warranty information

Package Contents: Uber’” Boom Ultra

USB-C Charging Cable (1.6ft / 49cm) • Quickstart Guide

Instagram cuter Facebook you
tube

GETTING STARTED
- REGISTER YOUR PRODUC
- DOWNLOAD THE USER GUIDE
- SIGN UP FOR THE NEWSLETTER
PLUG IN TO FULLY CHARGE PRODUCT BEFORE USE, AND THEN POWER ON
ION SOUND XP™ APP

Connect to ION Sound XP” App for a more dynamic experience:
a. Connect phone to speaker via Bluetooth’ (Step 4)
b, Download App from Apple App Store or Google Play Store
c. In App, press + button to search for speaker
d. Connect to speaker in App

CREATE YOUR SOUND EXPERIENCE
POWER
- Press and hold POWER to power on.
- When powered on, press POWER quickly to cycle through audio source modes: Bluetooth, Au; and USB/SD.
- Double tap POWER to turn Voice Prompts on/off.
  BLUETOOTH
- Press and hold POWER to power on.
- Choose “Uber Boom Ultra” in your Bluetooth settings menu.
- Press Play in music player App of choice on device.
- Press the Bluetooth button to disconnect device. Press and hold Bluetooth button to forget the device.
  AUX IN
- Connect any sound source to the AUX input using a 1/8″ cable (not included).
- To adjust the volume, turn your sound source volume up or use the + and – buttons on the speaker. Volume is not synced to playback device in AUX mode.
  **

USB/MICRO-SD**

  * Insert a USB drive or Micro-SD Card to play back stored audio files.
  * Tracks will play in the order they appear on the device.

**

BLUETOOTH/USB/SD PLAYBACK CONTROLS**

  * Press – and + to adjust volume.
  * Press and hold + to skip to the next track.
  * Press and hold – to revert to the beginning of the track. Press -again within one second to skip to the previous track.
  * Press PLAY/PAUSE to play or pause audio.

CUSTOMIZE YOUR SOUND EXPERIENCE

LIGHT MODES

  *  Press LIGHTS button or use App to cycle through 10 light ats modes.
  * Press and hold button to turn lights off

BASS BOOST
PROESS BBASSS 7655 BASS BOOST button to enhance the overall bass frequency response
STEREO-LINK™ See User Guide or App for link instructions to connect to another Uber” Boom Ultra.

ALL ANSWERING

  * When a phone is connected through Bluetooth, an incoming call will pause audio playback.
  * Quick press the PLAY/PAUSE button to answer
  * During the call, the + and – buttons will adjust volume.

Pressing PLAY/PAUSE button will end the call and audio
playback will resume,

MIC IN

  * Use a 1/4” cable to connect a microphone (not included) to this input. See the full User Guide to learn more about using a microphone.

Important Safety Instructions

Read and keep these instructions. Heed all warnings and follow all Instructions.
Warning (if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product.
Clean only with dry cloth.
Water and Moisture (if applicable): Do not use this apparatus near water. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Electrical equipment should NEVER be kept or stored in damp environments.
(If applicable) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install this equipment in a confined or “boxed-in” space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place exposed flame sources such as lighted candles on the apparatus.
(If applicable) This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.
(If applicable) Be careful not to damage the power cord. When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Only use attachment/accessories specified by the manufacturer.
(If applicable) Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Internal/External Voltage Selectors (if applicable): Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.
Caution (if applicable): Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (a battery pack or an installed battery) shall not be exposed to excessive heat such as sunshine, fire, etc.
(If applicable) Do not defeat the safety purpose of the polarized or grounding-type plug.
Protective earthing terminal (if applicable): The apparatus should be connected to a mains socket outlet with a protective earthing connection.
For Class II apparatus only: This symbol means the equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. When servicing use only identical replacement parts installed by an instructed person or with the use of ready-made leads or cords.
Warning (if applicable): Provide an earthing connection before the mains plug is connected to the mains. When disconnecting the earthing connection, be sure to disconnect it after pulling the mains plug out from the mains.
(If applicable) Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Warning (if applicable): To prevent possible hearing damage, do not listen at high volume levels for long periods.
This apparatus is for professional use only. Intended operational climate: moderate.

Safety Notices

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE ANY COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

CAUTION :Risk of electric shock. Do not open.
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un- insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
INSTRUCTIONS: The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance.

CAUTION (for U.S.A. & CANADIAN models only): TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NOTICE CONCERNING LASER PRODUCTS: DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

NOTICE CONCERNING FCC REGULATIONS : You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (a) reorient or relocate the receiving antenna; (b) move this unit; (c) increase the separation between the equipment and receiver; (d) connect the equipment into an outlet on a circuit different from that to which the receiver is connected; (e) be sure that all cables are properly shielded, using a choke or ferrite where appropriate; or (f) consult the dealer or an experienced radio/television technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Warning Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Avoid using this device in a high RF-radiated environment.

For Canadian models: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development (ISED) Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under ISED regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by ISED. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by ISED to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This unit does not exceed the Class B limits for radio noise emission from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications. This device operates on a no- protection, nointerference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio licence is required. For further details, consult Innovation, Science and Economic Development Canada’s document Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Low-Power Radio Apparatus in the TV Bands.

World Headquarters

inMusic Brands, Inc.
200 Scenic View Drive
Cumberland, RI 02864
USA
Tel: 401-658-4032
Fax: 401-658-3640

U.K. Office

inMusic Europe, Ltd.
Unit 3, Nexus Park
Lysons Avenue
Ash Vale
HAMPSHIRE
GU12 5QE
UNITED KINGDOM
Tel: 01252 896 040
Fax: 01252 896 021

Germany Office

inMusic GmbH
Hans-Günther-Sohl-Str. 4a
47807 Krefeld
GERMANY
Tel: 02102 7402 20150
Fax: 02102 7402 20011